@@ -11,8 +11,7 @@ FEATURES:=squashfs pci rtc usb dt gpio display ext4 rootfs-part boot-part
CPU_TYPE:=fa526
SUBTARGETS:=generic
-KERNEL_PATCHVER:=5.15
-KERNEL_TESTING_PATCHVER:=6.1
+KERNEL_PATCHVER:=6.1
define Target/Description
Build firmware images for the StorLink/Cortina Gemini CS351x ARM FA526 CPU
deleted file mode 100644
@@ -1,420 +0,0 @@
-CONFIG_ALIGNMENT_TRAP=y
-CONFIG_AMBA_PL08X=y
-CONFIG_ARCH_32BIT_OFF_T=y
-CONFIG_ARCH_GEMINI=y
-CONFIG_ARCH_KEEP_MEMBLOCK=y
-CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
-# CONFIG_ARCH_MOXART is not set
-CONFIG_ARCH_MULTIPLATFORM=y
-CONFIG_ARCH_MULTI_V4=y
-# CONFIG_ARCH_MULTI_V4T is not set
-CONFIG_ARCH_MULTI_V4_V5=y
-# CONFIG_ARCH_MULTI_V5 is not set
-CONFIG_ARCH_NR_GPIO=0
-CONFIG_ARCH_OPTIONAL_KERNEL_RWX=y
-CONFIG_ARCH_SELECT_MEMORY_MODEL=y
-CONFIG_ARCH_SPARSEMEM_ENABLE=y
-CONFIG_ARM=y
-CONFIG_ARM_AMBA=y
-CONFIG_ARM_APPENDED_DTB=y
-# CONFIG_ARM_ATAG_DTB_COMPAT is not set
-CONFIG_ARM_CRYPTO=y
-CONFIG_ARM_HAS_SG_CHAIN=y
-CONFIG_ARM_L1_CACHE_SHIFT=5
-CONFIG_ARM_PATCH_PHYS_VIRT=y
-# CONFIG_ARM_SMMU is not set
-CONFIG_ARM_UNWIND=y
-CONFIG_ATA=y
-CONFIG_ATAGS=y
-CONFIG_ATA_FORCE=y
-CONFIG_ATA_VERBOSE_ERROR=y
-CONFIG_AUTO_ZRELADDR=y
-CONFIG_BINFMT_FLAT_ARGVP_ENVP_ON_STACK=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_BLK_MQ_PCI=y
-CONFIG_BLK_PM=y
-CONFIG_BOUNCE=y
-CONFIG_CLKSRC_MMIO=y
-CONFIG_CLONE_BACKWARDS=y
-CONFIG_CMA=y
-CONFIG_CMA_ALIGNMENT=8
-CONFIG_CMA_AREAS=7
-# CONFIG_CMA_DEBUG is not set
-# CONFIG_CMA_DEBUGFS is not set
-CONFIG_CMA_SIZE_PERCENTAGE=10
-# CONFIG_CMA_SIZE_SEL_MAX is not set
-# CONFIG_CMA_SIZE_SEL_MBYTES is not set
-# CONFIG_CMA_SIZE_SEL_MIN is not set
-CONFIG_CMA_SIZE_SEL_PERCENTAGE=y
-# CONFIG_CMA_SYSFS is not set
-CONFIG_COMMON_CLK=y
-CONFIG_COMMON_CLK_GEMINI=y
-CONFIG_COMPAT_32BIT_TIME=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_CONTIG_ALLOC=y
-CONFIG_COREDUMP=y
-CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
-CONFIG_CPU_32v4=y
-CONFIG_CPU_ABRT_EV4=y
-CONFIG_CPU_CACHE_FA=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_FA=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-CONFIG_CPU_FA526=y
-CONFIG_CPU_NO_EFFICIENT_FFS=y
-CONFIG_CPU_PABRT_LEGACY=y
-CONFIG_CPU_THERMAL=y
-CONFIG_CPU_TLB_FA=y
-CONFIG_CPU_USE_DOMAINS=y
-CONFIG_CRASH_CORE=y
-CONFIG_CRC16=y
-# CONFIG_CRC32_SARWATE is not set
-CONFIG_CRC32_SLICEBY8=y
-CONFIG_CRC_CCITT=y
-CONFIG_CRC_ITU_T=y
-CONFIG_CROSS_MEMORY_ATTACH=y
-CONFIG_CRYPTO_CMAC=y
-CONFIG_CRYPTO_CRC32C=y
-CONFIG_CRYPTO_DES=y
-CONFIG_CRYPTO_DEV_SL3516=y
-# CONFIG_CRYPTO_DEV_SL3516_DEBUG is not set
-CONFIG_CRYPTO_DRBG=y
-CONFIG_CRYPTO_DRBG_HMAC=y
-CONFIG_CRYPTO_DRBG_MENU=y
-CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_ECHAINIV=y
-CONFIG_CRYPTO_ENGINE=y
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_HW=y
-CONFIG_CRYPTO_JITTERENTROPY=y
-CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y
-CONFIG_CRYPTO_LIB_DES=y
-CONFIG_CRYPTO_LIB_SHA256=y
-CONFIG_CRYPTO_MD4=y
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_RNG=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_RNG_DEFAULT=y
-CONFIG_CRYPTO_SEQIV=y
-CONFIG_CRYPTO_SHA256=y
-CONFIG_CRYPTO_SHA512=y
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_DEBUG_LL_INCLUDE="mach/debug-macro.S"
-CONFIG_DEBUG_MEMORY_INIT=y
-CONFIG_DECOMPRESS_BZIP2=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_DECOMPRESS_LZ4=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_DECOMPRESS_LZO=y
-CONFIG_DECOMPRESS_XZ=y
-CONFIG_DMADEVICES=y
-CONFIG_DMATEST=y
-CONFIG_DMA_CMA=y
-CONFIG_DMA_ENGINE=y
-CONFIG_DMA_ENGINE_RAID=y
-CONFIG_DMA_OF=y
-CONFIG_DMA_OPS=y
-CONFIG_DMA_REMAP=y
-CONFIG_DMA_SHARED_BUFFER=y
-CONFIG_DMA_VIRTUAL_CHANNELS=y
-CONFIG_DRM=y
-CONFIG_DRM_BRIDGE=y
-CONFIG_DRM_FBDEV_EMULATION=y
-CONFIG_DRM_FBDEV_OVERALLOC=100
-CONFIG_DRM_GEM_CMA_HELPER=y
-CONFIG_DRM_KMS_CMA_HELPER=y
-CONFIG_DRM_KMS_HELPER=y
-CONFIG_DRM_PANEL=y
-CONFIG_DRM_PANEL_BRIDGE=y
-CONFIG_DRM_PANEL_ILITEK_IL9322=y
-CONFIG_DRM_PANEL_ORIENTATION_QUIRKS=y
-CONFIG_DRM_TVE200=y
-CONFIG_DTC=y
-CONFIG_DUMMY_CONSOLE=y
-CONFIG_EDAC_ATOMIC_SCRUB=y
-CONFIG_EDAC_SUPPORT=y
-CONFIG_EEPROM_93CX6=y
-CONFIG_ELF_CORE=y
-# CONFIG_EMBEDDED is not set
-# CONFIG_EXPERT is not set
-CONFIG_EXT4_FS=y
-CONFIG_FARADAY_FTINTC010=y
-CONFIG_FB=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-CONFIG_FB_CMDLINE=y
-CONFIG_FB_DEFERRED_IO=y
-CONFIG_FB_SYS_COPYAREA=y
-CONFIG_FB_SYS_FILLRECT=y
-CONFIG_FB_SYS_FOPS=y
-CONFIG_FB_SYS_IMAGEBLIT=y
-CONFIG_FHANDLE=y
-CONFIG_FIXED_PHY=y
-CONFIG_FIX_EARLYCON_MEM=y
-CONFIG_FONT_8x16=y
-CONFIG_FONT_8x8=y
-CONFIG_FONT_SUPPORT=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-CONFIG_FS_IOMAP=y
-CONFIG_FS_MBCACHE=y
-CONFIG_FS_POSIX_ACL=y
-CONFIG_FTTMR010_TIMER=y
-CONFIG_FTWDT010_WATCHDOG=y
-CONFIG_FWNODE_MDIO=y
-CONFIG_FW_LOADER_PAGED_BUF=y
-# CONFIG_FW_LOADER_USER_HELPER_FALLBACK is not set
-CONFIG_GEMINI_ETHERNET=y
-CONFIG_GENERIC_ALLOCATOR=y
-CONFIG_GENERIC_ATOMIC64=y
-CONFIG_GENERIC_BUG=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CPU_AUTOPROBE=y
-CONFIG_GENERIC_EARLY_IOREMAP=y
-CONFIG_GENERIC_IDLE_POLL_SETUP=y
-CONFIG_GENERIC_IRQ_MULTI_HANDLER=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
-CONFIG_GENERIC_LIB_DEVMEM_IS_ALLOWED=y
-CONFIG_GENERIC_PCI_IOMAP=y
-CONFIG_GENERIC_PINCONF=y
-CONFIG_GENERIC_SCHED_CLOCK=y
-CONFIG_GENERIC_SMP_IDLE_THREAD=y
-CONFIG_GENERIC_STRNCPY_FROM_USER=y
-CONFIG_GENERIC_STRNLEN_USER=y
-CONFIG_GLOB=y
-CONFIG_GPIOLIB_IRQCHIP=y
-CONFIG_GPIO_CDEV=y
-CONFIG_GPIO_FTGPIO010=y
-CONFIG_GPIO_GENERIC=y
-CONFIG_GRO_CELLS=y
-CONFIG_HANDLE_DOMAIN_IRQ=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT_MAP=y
-CONFIG_HDMI=y
-CONFIG_HIGHMEM=y
-CONFIG_HIGHPTE=y
-CONFIG_HWMON=y
-CONFIG_HW_CONSOLE=y
-CONFIG_HW_RANDOM=y
-CONFIG_HZ_FIXED=0
-CONFIG_I2C=y
-CONFIG_I2C_ALGOBIT=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
-CONFIG_I2C_GPIO=y
-CONFIG_I2C_HELPER_AUTO=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_INPUT=y
-CONFIG_INPUT_KEYBOARD=y
-# CONFIG_IOMMU_DEBUGFS is not set
-# CONFIG_IOMMU_IO_PGTABLE_ARMV7S is not set
-# CONFIG_IOMMU_IO_PGTABLE_LPAE is not set
-CONFIG_IOMMU_SUPPORT=y
-CONFIG_IPC_NS=y
-CONFIG_IRQCHIP=y
-CONFIG_IRQ_DOMAIN=y
-CONFIG_IRQ_FORCED_THREADING=y
-CONFIG_IRQ_WORK=y
-# CONFIG_ISDN is not set
-CONFIG_JBD2=y
-CONFIG_KALLSYMS=y
-CONFIG_KCMP=y
-CONFIG_KERNEL_LZMA=y
-# CONFIG_KERNEL_XZ is not set
-CONFIG_KEXEC=y
-CONFIG_KEXEC_CORE=y
-CONFIG_KEYBOARD_DLINK_DIR685=y
-CONFIG_KMAP_LOCAL=y
-CONFIG_KMAP_LOCAL_NON_LINEAR_PTE_ARRAY=y
-# CONFIG_LDM_DEBUG is not set
-CONFIG_LDM_PARTITION=y
-CONFIG_LEDS_TRIGGER_DISK=y
-CONFIG_LIBFDT=y
-CONFIG_LOCK_DEBUGGING_SUPPORT=y
-CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_CLUT224=y
-# CONFIG_LOGO_LINUX_MONO is not set
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LZ4_DECOMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_MARVELL_PHY=y
-CONFIG_MDIO_BITBANG=y
-CONFIG_MDIO_BUS=y
-CONFIG_MDIO_DEVICE=y
-CONFIG_MDIO_DEVRES=y
-CONFIG_MDIO_GPIO=y
-CONFIG_MEMFD_CREATE=y
-CONFIG_MEMORY_ISOLATION=y
-CONFIG_MFD_SYSCON=y
-CONFIG_MIGRATION=y
-CONFIG_MODULES_USE_ELF_REL=y
-# CONFIG_MODULE_UNLOAD is not set
-CONFIG_MQ_IOSCHED_DEADLINE=y
-CONFIG_MQ_IOSCHED_KYBER=y
-CONFIG_MTD_CFI_STAA=y
-CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_GEMINI=y
-CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_SPLIT_FIRMWARE=y
-CONFIG_MTD_SPLIT_WRGG_FW=y
-CONFIG_NAMESPACES=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NEED_KUSER_HELPERS=y
-CONFIG_NEED_PER_CPU_KM=y
-CONFIG_NET_DEVLINK=y
-CONFIG_NET_DSA=y
-CONFIG_NET_DSA_REALTEK_SMI=y
-CONFIG_NET_DSA_TAG_RTL4_A=y
-CONFIG_NET_NS=y
-CONFIG_NET_SELFTESTS=y
-CONFIG_NET_SWITCHDEV=y
-CONFIG_NLS=y
-CONFIG_NO_HZ_COMMON=y
-CONFIG_NO_HZ_IDLE=y
-CONFIG_NVMEM=y
-CONFIG_OF=y
-CONFIG_OF_ADDRESS=y
-CONFIG_OF_EARLY_FLATTREE=y
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_GPIO=y
-CONFIG_OF_IRQ=y
-CONFIG_OF_KOBJ=y
-CONFIG_OF_MDIO=y
-CONFIG_OLD_SIGACTION=y
-CONFIG_OLD_SIGSUSPEND3=y
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PANIC_ON_OOPS is not set
-CONFIG_PANIC_ON_OOPS_VALUE=0
-CONFIG_PANIC_TIMEOUT=0
-CONFIG_PATA_FTIDE010=y
-CONFIG_PCI=y
-CONFIG_PCIEASPM=y
-CONFIG_PCIEASPM_DEFAULT=y
-# CONFIG_PCIEASPM_PERFORMANCE is not set
-# CONFIG_PCIEASPM_POWERSAVE is not set
-# CONFIG_PCIEASPM_POWER_SUPERSAVE is not set
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_DOMAINS_GENERIC=y
-CONFIG_PCI_FTPCI100=y
-CONFIG_PERF_USE_VMALLOC=y
-CONFIG_PGTABLE_LEVELS=2
-CONFIG_PHYLIB=y
-CONFIG_PHYLINK=y
-CONFIG_PID_NS=y
-CONFIG_PINCTRL=y
-CONFIG_PINCTRL_GEMINI=y
-# CONFIG_PINCTRL_SINGLE is not set
-CONFIG_PM=y
-CONFIG_PM_CLK=y
-CONFIG_POWER_RESET=y
-CONFIG_POWER_RESET_GEMINI_POWEROFF=y
-CONFIG_POWER_RESET_SYSCON=y
-CONFIG_PREEMPT=y
-CONFIG_PREEMPTION=y
-CONFIG_PREEMPT_COUNT=y
-# CONFIG_PREEMPT_NONE is not set
-CONFIG_PREEMPT_RCU=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_PTP_1588_CLOCK_OPTIONAL=y
-CONFIG_RATIONAL=y
-CONFIG_RD_BZIP2=y
-CONFIG_RD_GZIP=y
-CONFIG_RD_LZ4=y
-CONFIG_RD_LZMA=y
-CONFIG_RD_LZO=y
-CONFIG_RD_XZ=y
-CONFIG_REALTEK_PHY=y
-CONFIG_REGMAP=y
-CONFIG_REGMAP_I2C=y
-CONFIG_REGMAP_MMIO=y
-CONFIG_REGULATOR=y
-CONFIG_REGULATOR_FIXED_VOLTAGE=y
-CONFIG_RELAY=y
-CONFIG_RESET_CONTROLLER=y
-CONFIG_RSEQ=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_FTRTC010=y
-CONFIG_RTC_I2C_AND_SPI=y
-CONFIG_RTC_MC146818_LIB=y
-CONFIG_RTC_NVMEM=y
-CONFIG_SATA_GEMINI=y
-CONFIG_SATA_HOST=y
-CONFIG_SATA_PMP=y
-CONFIG_SCSI=y
-CONFIG_SCSI_COMMON=y
-# CONFIG_SCSI_LOWLEVEL is not set
-# CONFIG_SCSI_PROC_FS is not set
-CONFIG_SENSORS_DRIVETEMP=y
-CONFIG_SENSORS_GPIO_FAN=y
-CONFIG_SENSORS_LM75=y
-CONFIG_SERIAL_8250_DEPRECATED_OPTIONS=y
-CONFIG_SERIAL_8250_EXAR=y
-CONFIG_SERIAL_8250_FSL=y
-CONFIG_SERIAL_8250_NR_UARTS=1
-CONFIG_SERIAL_8250_PCI=y
-CONFIG_SERIAL_8250_RUNTIME_UARTS=1
-CONFIG_SERIAL_MCTRL_GPIO=y
-CONFIG_SERIAL_OF_PLATFORM=y
-CONFIG_SERIO=y
-CONFIG_SERIO_LIBPS2=y
-CONFIG_SERIO_SERPORT=y
-CONFIG_SG_POOL=y
-CONFIG_SLUB_DEBUG=y
-CONFIG_SPARSE_IRQ=y
-CONFIG_SPI=y
-CONFIG_SPI_BITBANG=y
-CONFIG_SPI_GPIO=y
-CONFIG_SPI_MASTER=y
-CONFIG_SPLIT_PTLOCK_CPUS=999999
-CONFIG_SRCU=y
-# CONFIG_STRIP_ASM_SYMS is not set
-CONFIG_SWPHY=y
-CONFIG_SYNC_FILE=y
-CONFIG_SYSFS_SYSCALL=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_THERMAL=y
-CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
-CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0
-CONFIG_THERMAL_GOV_STEP_WISE=y
-CONFIG_THERMAL_HWMON=y
-CONFIG_THERMAL_OF=y
-CONFIG_TICK_CPU_ACCOUNTING=y
-CONFIG_TIMER_OF=y
-CONFIG_TIMER_PROBE=y
-CONFIG_TMPFS_POSIX_ACL=y
-CONFIG_TREE_RCU=y
-CONFIG_TREE_SRCU=y
-CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h"
-CONFIG_UNINLINE_SPIN_UNLOCK=y
-CONFIG_UNWINDER_ARM=y
-CONFIG_USB_SUPPORT=y
-CONFIG_USER_NS=y
-CONFIG_USE_OF=y
-CONFIG_UTS_NS=y
-CONFIG_VGA_ARB=y
-CONFIG_VGA_ARB_MAX_GPUS=16
-CONFIG_VITESSE_PHY=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_WATCHDOG_CORE=y
-# CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not set
-CONFIG_XZ_DEC_ARM=y
-CONFIG_XZ_DEC_ARMTHUMB=y
-CONFIG_XZ_DEC_BCJ=y
-CONFIG_XZ_DEC_IA64=y
-CONFIG_XZ_DEC_POWERPC=y
-CONFIG_XZ_DEC_SPARC=y
-CONFIG_XZ_DEC_X86=y
-CONFIG_ZBOOT_ROM_BSS=0
-CONFIG_ZBOOT_ROM_TEXT=0
-CONFIG_ZLIB_INFLATE=y
@@ -3,11 +3,8 @@ define KernelPackage/usb-fotg210
DEPENDS:=@USB_SUPPORT @TARGET_gemini
KCONFIG:=CONFIG_USB_FOTG210 \
CONFIG_USB_FOTG210_HCD
- FILES:=$(if $(CONFIG_USB_FOTG210_HCD),$(LINUX_DIR)/drivers/usb/host/fotg210-hcd.ko@lt6.1) \
- $(if $(CONFIG_USB_FOTG210),$(LINUX_DIR)/drivers/usb/fotg210/fotg210.ko@ge6.1)
- AUTOLOAD:=$(call AutoLoad,50, \
- $(if $(CONFIG_USB_FOTG210_HCD),fotg210-hcd@lt6.1) \
- $(if $(CONFIG_USB_FOTG210),fotg210@ge6.1),1)
+ FILES:=$(LINUX_DIR)/drivers/usb/fotg210/fotg210.ko
+ AUTOLOAD:=$(call AutoLoad,50,1)
$(call AddDepends/usb)
endef
deleted file mode 100644
@@ -1,131 +0,0 @@
-From ff887de2f7af17d6264eb946f6b336e6e1521222 Mon Sep 17 00:00:00 2001
-From: Linus Walleij <linus.walleij@linaro.org>
-Date: Fri, 21 Apr 2017 22:19:00 +0200
-Subject: [PATCH 1/2] usb: host: fotg2: add Gemini-specific handling
-
-The Cortina Systems Gemini has bolted on a PHY inside the
-silicon that can be handled by six bits in a MISC register in
-the system controller.
-
-If we are running on Gemini, look up a syscon regmap through
-a phandle and enable VBUS and optionally the Mini-B connector.
-
-If the device is flagged as "wakeup-source" using the standard
-DT bindings, we also enable this in the global controller for
-respective port.
-
-Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
----
- drivers/usb/host/Kconfig | 1 +
- drivers/usb/host/fotg210-hcd.c | 76 ++++++++++++++++++++++++++++++++++
- 2 files changed, 77 insertions(+)
-
---- a/drivers/usb/host/Kconfig
-+++ b/drivers/usb/host/Kconfig
-@@ -381,6 +381,7 @@ config USB_ISP1362_HCD
- config USB_FOTG210_HCD
- tristate "FOTG210 HCD support"
- depends on USB && HAS_DMA && HAS_IOMEM
-+ select MFD_SYSCON
- help
- Faraday FOTG210 is an OTG controller which can be configured as
- an USB2.0 host. It is designed to meet USB2.0 EHCI specification
---- a/drivers/usb/host/fotg210-hcd.c
-+++ b/drivers/usb/host/fotg210-hcd.c
-@@ -34,6 +34,10 @@
- #include <linux/io.h>
- #include <linux/iopoll.h>
- #include <linux/clk.h>
-+#include <linux/bitops.h>
-+/* For Cortina Gemini */
-+#include <linux/mfd/syscon.h>
-+#include <linux/regmap.h>
-
- #include <asm/byteorder.h>
- #include <asm/irq.h>
-@@ -5557,6 +5561,72 @@ static void fotg210_init(struct fotg210_
- }
-
- /*
-+ * Gemini-specific initialization function, only executed on the
-+ * Gemini SoC using the global misc control register.
-+ */
-+#define GEMINI_GLOBAL_MISC_CTRL 0x30
-+#define GEMINI_MISC_USB0_WAKEUP BIT(14)
-+#define GEMINI_MISC_USB1_WAKEUP BIT(15)
-+#define GEMINI_MISC_USB0_VBUS_ON BIT(22)
-+#define GEMINI_MISC_USB1_VBUS_ON BIT(23)
-+#define GEMINI_MISC_USB0_MINI_B BIT(29)
-+#define GEMINI_MISC_USB1_MINI_B BIT(30)
-+
-+static int fotg210_gemini_init(struct device *dev, struct usb_hcd *hcd)
-+{
-+ struct device_node *np = dev->of_node;
-+ struct regmap *map;
-+ bool mini_b;
-+ bool wakeup;
-+ u32 mask, val;
-+ int ret;
-+
-+ map = syscon_regmap_lookup_by_phandle(np, "syscon");
-+ if (IS_ERR(map)) {
-+ dev_err(dev, "no syscon\n");
-+ return PTR_ERR(map);
-+ }
-+ mini_b = of_property_read_bool(np, "cortina,gemini-mini-b");
-+ wakeup = of_property_read_bool(np, "wakeup-source");
-+
-+ /*
-+ * Figure out if this is USB0 or USB1 by simply checking the
-+ * physical base address.
-+ */
-+ mask = 0;
-+ if (hcd->rsrc_start == 0x69000000) {
-+ val = GEMINI_MISC_USB1_VBUS_ON;
-+ if (mini_b)
-+ val |= GEMINI_MISC_USB1_MINI_B;
-+ else
-+ mask |= GEMINI_MISC_USB1_MINI_B;
-+ if (wakeup)
-+ val |= GEMINI_MISC_USB1_WAKEUP;
-+ else
-+ mask |= GEMINI_MISC_USB1_WAKEUP;
-+ } else {
-+ val = GEMINI_MISC_USB0_VBUS_ON;
-+ if (mini_b)
-+ val |= GEMINI_MISC_USB0_MINI_B;
-+ else
-+ mask |= GEMINI_MISC_USB0_MINI_B;
-+ if (wakeup)
-+ val |= GEMINI_MISC_USB0_WAKEUP;
-+ else
-+ mask |= GEMINI_MISC_USB0_WAKEUP;
-+ }
-+
-+ ret = regmap_update_bits(map, GEMINI_GLOBAL_MISC_CTRL, mask, val);
-+ if (ret) {
-+ dev_err(dev, "failed to initialize Gemini PHY\n");
-+ return ret;
-+ }
-+
-+ dev_info(dev, "initialized Gemini PHY\n");
-+ return 0;
-+}
-+
-+/**
- * fotg210_hcd_probe - initialize faraday FOTG210 HCDs
- *
- * Allocates basic resources for this USB host controller, and
-@@ -5633,6 +5703,12 @@ static int fotg210_hcd_probe(struct plat
-
- fotg210_init(fotg210);
-
-+ if (of_device_is_compatible(dev->of_node, "cortina,gemini-usb")) {
-+ retval = fotg210_gemini_init(dev, hcd);
-+ if (retval)
-+ goto failed_dis_clk;
-+ }
-+
- retval = usb_add_hcd(hcd, irq, IRQF_SHARED);
- if (retval) {
- dev_err(dev, "failed to add hcd with err %d\n", retval);
deleted file mode 100644
@@ -1,37 +0,0 @@
-From 36ee838bf83c01cff7cb47c7b07be278d2950ac0 Mon Sep 17 00:00:00 2001
-From: Linus Walleij <linus.walleij@linaro.org>
-Date: Mon, 11 Mar 2019 15:44:29 +0100
-Subject: [PATCH 2/2] ARM: dts: Augment DIR-685 partition table for OpenWrt
-
-Rename the firmware partition so that the firmware MTD
-splitter will do its job, drop the rootfs arguments as
-the MTD splitter will set this up automatically.
-
-Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
----
- arch/arm/boot/dts/gemini-dlink-dir-685.dts | 6 +++---
- 1 file changed, 3 insertions(+), 3 deletions(-)
-
---- a/arch/arm/boot/dts/gemini-dlink-dir-685.dts
-+++ b/arch/arm/boot/dts/gemini-dlink-dir-685.dts
-@@ -20,7 +20,7 @@
- };
-
- chosen {
-- bootargs = "console=ttyS0,19200n8 root=/dev/sda1 rw rootwait consoleblank=300";
-+ bootargs = "console=ttyS0,19200n8 consoleblank=300";
- stdout-path = "uart0:19200n8";
- };
-
-@@ -317,9 +317,9 @@
- * this is called "upgrade" on the vendor system.
- */
- partition@40000 {
-- label = "upgrade";
-+ compatible = "wrg";
-+ label = "firmware";
- reg = <0x00040000 0x01f40000>;
-- read-only;
- };
- /* RGDB, Residental Gateway Database? */
- partition@1f80000 {
There is no point in keeping the v5.15 kernel around for Gemini, we are maintaining the platform with a strong upstream focus and newer is always better. Now that OpenWrt can support pure v6.1 kernels, switch up to v6.1 and drop v5.15 so we don't need to migrate configs and patches for no reason. The USB FOTG2 module handling can be simplified as a result. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> --- target/linux/gemini/Makefile | 3 +- target/linux/gemini/config-5.15 | 420 --------------------- target/linux/gemini/modules.mk | 7 +- ...b-host-fotg2-add-Gemini-specific-handling.patch | 131 ------- ...gment-DIR-685-partition-table-for-OpenWrt.patch | 37 -- 5 files changed, 3 insertions(+), 595 deletions(-) --- base-commit: 10867ec4bc170709f89595ec4c3a2c7d9a7b13d2 change-id: 20230928-gemini-drop-v5-15-30d577bf699b Best regards,