| Message ID | 20211005194024.31909-5-fercerpav@gmail.com |
|---|---|
| State | Changes Requested |
| Delegated to: | Petr Štetiar |
| Headers | show |
| Series | realtek: support boards similar to DGS-1210-10 | expand |
Hi, > -----Original Message----- > From: openwrt-devel [mailto:openwrt-devel-bounces@lists.openwrt.org] > On Behalf Of Paul Fertser > Sent: Dienstag, 5. Oktober 2021 21:40 > To: openwrt-devel@lists.openwrt.org > Cc: Paul Fertser <fercerpav@gmail.com> > Subject: [RFT 4/5] realtek: support D-Link DGS-1210-10P H/W:R1 > [...] > > diff --git a/target/linux/realtek/base-files/etc/board.d/02_network > b/target/linux/realtek/base-files/etc/board.d/02_network > index 58461c9c995f..e7c45de92328 100644 > --- a/target/linux/realtek/base-files/etc/board.d/02_network > +++ b/target/linux/realtek/base-files/etc/board.d/02_network > @@ -48,6 +48,13 @@ done > [ -n "$label_mac" ] && ucidef_set_label_macaddr $label_mac > > case $board in > +d-link,dgs-1210-10p-f1|\ > +d-link,dgs-1210-10p-r1) F1 should be added with F1 support here, unless I'm misunderstanding something. Best Adrian > + ucidef_set_poe 65 "$lan_list" > + # once PoE board data is standardised it should also include > + # max per-port power: 30 W > + # PoE id numbers: inversed, e.g. lan2 is id 7 > + ;; > netgear,gs110tpp-v1) > ucidef_set_poe 130 "$lan_list" > ;; > diff --git a/target/linux/realtek/dts-5.10/rtl8380_d-link_dgs-1210-10p-r1.dts > b/target/linux/realtek/dts-5.10/rtl8380_d-link_dgs-1210-10p-r1.dts > new file mode 100644 > index 000000000000..379e0140bdf0 > --- /dev/null > +++ b/target/linux/realtek/dts-5.10/rtl8380_d-link_dgs-1210-10p-r1.dts > @@ -0,0 +1,67 @@ > +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT > + > +#include "rtl8380_d-link_dgs-1210-10.dtsi" > + > +/ { > + compatible = "d-link,dgs-1210-10p-r1", "realtek,rtl838x-soc"; > + model = "D-Link DGS-1210-10P R1"; > + > + memory@0 { > + device_type = "memory"; > + reg = <0x0 0x10000000>; > + }; > +}; > + > +&spi0 { > + status = "okay"; > + > + flash@0 { > + compatible = "jedec,spi-nor"; > + reg = <0>; > + spi-max-frequency = <50000000>; > + > + partitions { > + compatible = "fixed-partitions"; > + #address-cells = <1>; > + #size-cells = <1>; > + > + partition@0 { > + label = "u-boot"; > + reg = <0x00000000 0x0080000>; > + read-only; > + }; > + > + partition@80000 { > + label = "u-boot-env"; > + reg = <0x00080000 0x0040000>; > + read-only; > + }; > + > + partition@c0000 { > + label = "u-boot-env2"; > + reg = <0x000c0000 0x0040000>; > + }; > + > + partition@100000 { > + label = "firmware"; > + compatible = "denx,uimage"; > + reg = <0x00100000 0x0e80000>; > + }; > + > + partition@f80000 { > + label = "kernel2"; > + reg = <0x00f80000 0x0180000>; > + }; > + > + partition@1100000 { > + label = "rootfs2"; > + reg = <0x01100000 0x0d00000>; > + }; > + > + partition@1e00000 { > + label = "jffs2"; > + reg = <0x01e00000 0x0200000>; > + }; > + }; > + }; > +}; > diff --git a/target/linux/realtek/image/Makefile > b/target/linux/realtek/image/Makefile > index 903ad3815690..c7238494606e 100644 > --- a/target/linux/realtek/image/Makefile > +++ b/target/linux/realtek/image/Makefile > @@ -69,6 +69,17 @@ define Device/d-link_dgs-1210-10p-f1 endef > TARGET_DEVICES += d-link_dgs-1210-10p-f1 > > +define Device/d-link_dgs-1210-10p-r1 > + $(Device/d-link_dgs-1210) > + SOC := rtl8380 > + IMAGE_SIZE := 14848k > + DEVICE_MODEL := DGS-1210-10P > + DEVICE_VARIANT := R1 > + # TODO > + # DEVICE_PACKAGES += realtek-poe > +endef > +TARGET_DEVICES += d-link_dgs-1210-10p-r1 > + > define Device/d-link_dgs-1210-16 > $(Device/d-link_dgs-1210) > DEVICE_MODEL := DGS-1210-16 > -- > 2.17.1 > > > _______________________________________________ > openwrt-devel mailing list > openwrt-devel@lists.openwrt.org > https://lists.openwrt.org/mailman/listinfo/openwrt-devel
diff --git a/target/linux/realtek/base-files/etc/board.d/02_network b/target/linux/realtek/base-files/etc/board.d/02_network index 58461c9c995f..e7c45de92328 100644 --- a/target/linux/realtek/base-files/etc/board.d/02_network +++ b/target/linux/realtek/base-files/etc/board.d/02_network @@ -48,6 +48,13 @@ done [ -n "$label_mac" ] && ucidef_set_label_macaddr $label_mac case $board in +d-link,dgs-1210-10p-f1|\ +d-link,dgs-1210-10p-r1) + ucidef_set_poe 65 "$lan_list" + # once PoE board data is standardised it should also include + # max per-port power: 30 W + # PoE id numbers: inversed, e.g. lan2 is id 7 + ;; netgear,gs110tpp-v1) ucidef_set_poe 130 "$lan_list" ;; diff --git a/target/linux/realtek/dts-5.10/rtl8380_d-link_dgs-1210-10p-r1.dts b/target/linux/realtek/dts-5.10/rtl8380_d-link_dgs-1210-10p-r1.dts new file mode 100644 index 000000000000..379e0140bdf0 --- /dev/null +++ b/target/linux/realtek/dts-5.10/rtl8380_d-link_dgs-1210-10p-r1.dts @@ -0,0 +1,67 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "rtl8380_d-link_dgs-1210-10.dtsi" + +/ { + compatible = "d-link,dgs-1210-10p-r1", "realtek,rtl838x-soc"; + model = "D-Link DGS-1210-10P R1"; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x10000000>; + }; +}; + +&spi0 { + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <50000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x00000000 0x0080000>; + read-only; + }; + + partition@80000 { + label = "u-boot-env"; + reg = <0x00080000 0x0040000>; + read-only; + }; + + partition@c0000 { + label = "u-boot-env2"; + reg = <0x000c0000 0x0040000>; + }; + + partition@100000 { + label = "firmware"; + compatible = "denx,uimage"; + reg = <0x00100000 0x0e80000>; + }; + + partition@f80000 { + label = "kernel2"; + reg = <0x00f80000 0x0180000>; + }; + + partition@1100000 { + label = "rootfs2"; + reg = <0x01100000 0x0d00000>; + }; + + partition@1e00000 { + label = "jffs2"; + reg = <0x01e00000 0x0200000>; + }; + }; + }; +}; diff --git a/target/linux/realtek/image/Makefile b/target/linux/realtek/image/Makefile index 903ad3815690..c7238494606e 100644 --- a/target/linux/realtek/image/Makefile +++ b/target/linux/realtek/image/Makefile @@ -69,6 +69,17 @@ define Device/d-link_dgs-1210-10p-f1 endef TARGET_DEVICES += d-link_dgs-1210-10p-f1 +define Device/d-link_dgs-1210-10p-r1 + $(Device/d-link_dgs-1210) + SOC := rtl8380 + IMAGE_SIZE := 14848k + DEVICE_MODEL := DGS-1210-10P + DEVICE_VARIANT := R1 + # TODO + # DEVICE_PACKAGES += realtek-poe +endef +TARGET_DEVICES += d-link_dgs-1210-10p-r1 + define Device/d-link_dgs-1210-16 $(Device/d-link_dgs-1210) DEVICE_MODEL := DGS-1210-16
This is an 8 port 1000BASE-T + 2 1000BASE-X SFP gigabit switch with PoE+ support, 65 W budget (using 54 V * 1.574 A = 85 W power supply). In order to manipulate the PoE+ one needs the realtek-poe package [0]. Specifications -------------- * SoC: Realtek RTL8380M 500 MHz MIPS 4KEc * Flash: Macronix MX25L25645GMI-08G 32 MiB * RAM: Nanya NT5CC256M8JQ-EK 256 MiB DDR3(L) SDRAM * Ethernet: 8x 10/100/1000 1000BASE-T 2x 1000BASE-X SFP * PoE+: Broadcom BCM59121B0KMLG (IEEE 802.3at-2009 compliant) Controlled by Nuvoton M0516LDE MCU talking undocumented protocol to the Realtek's second UART * Buttons: Mode ("lights_toggle") and Reset * LEDs: Power, PoE Max, Link and PoE software-controlled; per-port link indication LEDs hardware-controlled * UART: 2.54 mm header with populated standard pin connector J8 Pin 1: Vcc (3.3 V) Pin 2: Tx Pin 3: Rx Pin 4: GND Baud and framing: 115200 8n1 Installation ------------ * Configure your client with static 10.90.90.91/24 address. * Set up a TFTP server on your client and make it serve the initramfs image. Connect it to port 1 of the switch. * Connect serial, power up the switch, interrupt U-boot by hitting Escape after seeing "Power on self test" message * Download the image onto the device and boot from it: > tftpboot 0x8f000000 10.90.90.91:openwrt-realtek-generic-d-link_dgs-1210-10p-r1-initramfs-kernel.bin > bootm * Once OpenWrt has booted reconfigure your client to use VID 100 and DHCP, scp the sysupgrade image to /tmp and run sysupgrade. [0] https://patchwork.ozlabs.org/project/openwrt/patch/20210511152243.1167160-1-john@phrozen.org/ Signed-off-by: Paul Fertser <fercerpav@gmail.com> --- .../realtek/base-files/etc/board.d/02_network | 7 ++ .../rtl8380_d-link_dgs-1210-10p-r1.dts | 67 +++++++++++++++++++ target/linux/realtek/image/Makefile | 11 +++ 3 files changed, 85 insertions(+) create mode 100644 target/linux/realtek/dts-5.10/rtl8380_d-link_dgs-1210-10p-r1.dts