| Message ID | 20200420133503.18700-14-hacks@slashdirt.org |
|---|---|
| State | Accepted |
| Delegated to: | Koen Vandeputte |
| Headers | show |
| Series | RouterBOARD sysfs driver for RouterBoot data | expand |
diff --git a/target/linux/ath79/mikrotik/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom b/target/linux/ath79/mikrotik/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom index be2f6aec69..c63856327c 100644 --- a/target/linux/ath79/mikrotik/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom +++ b/target/linux/ath79/mikrotik/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom @@ -13,8 +13,10 @@ case "$FIRMWARE" in "ath9k-eeprom-ahb-18100000.wmac.bin") case $board in mikrotik,routerboard-wap-g-5hact2hnd) - caldata_from_file $wlan_data 0x1000 0x440 - ath9k_patch_mac $(macaddr_add $(cat $mac_base) +2) + caldata_from_file $wlan_data 0x1000 0x440 /tmp/$FIRMWARE + ath9k_patch_mac $(macaddr_add $(cat $mac_base) +2) /tmp/$FIRMWARE + caldata_sysfsload_from_file /tmp/$FIRMWARE 0x0 0x440 + rm -f /tmp/$FIRMWARE ;; *) caldata_die "board $board is not supported yet" diff --git a/target/linux/ath79/mikrotik/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ath79/mikrotik/base-files/etc/hotplug.d/firmware/11-ath10k-caldata index b486a5720d..531c21678f 100644 --- a/target/linux/ath79/mikrotik/base-files/etc/hotplug.d/firmware/11-ath10k-caldata +++ b/target/linux/ath79/mikrotik/base-files/etc/hotplug.d/firmware/11-ath10k-caldata @@ -12,14 +12,14 @@ case "$FIRMWARE" in "ath10k/cal-pci-0000:00:00.0.bin") case $board in mikrotik,routerboard-wap-g-5hact2hnd) - caldata_from_file $wlan_data 0x5000 0x844 + caldata_sysfsload_from_file $wlan_data 0x5000 0x844 ;; esac ;; "ath10k/cal-pci-0000:01:00.0.bin") case $board in mikrotik,routerboard-922uags-5hpacd) - caldata_from_file $wlan_data 0x5000 0x844 + caldata_sysfsload_from_file $wlan_data 0x5000 0x844 ;; esac ;;
This commit takes advantages of base-files 220 which introduces routines to perform caldata loading directly via the kernel sysfs loader helper. This has the benefits of not wasting flash space to store caldata. Memory footprint is reduced to the bare minimum: for devices that don't need MAC patching, the caldata is loaded directly, for devices that do need MAC patching, the caldata is extracted to /tmp, patched and then loaded. Signed-off-by: Thibaut VARÈNE <hacks@slashdirt.org> --- .../mikrotik/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom | 6 ++++-- .../mikrotik/base-files/etc/hotplug.d/firmware/11-ath10k-caldata | 4 ++-- 2 files changed, 6 insertions(+), 4 deletions(-)