deleted file mode 100644
@@ -1,17 +0,0 @@
-/dts-v1/;
-
-#include "mt7621_ubiquiti_edgerouterx.dtsi"
-
-/ {
- model = "UBNT-ERX-SFP";
- compatible = "ubiquiti,edgerouterx-sfp", "mediatek,mt7621-soc";
-};
-
-&i2c {
- status = "okay";
-
- pca9555@25 {
- compatible = "nxp,pca9555";
- reg = <0x25>;
- };
-};
deleted file mode 100644
@@ -1,8 +0,0 @@
-/dts-v1/;
-
-#include "mt7621_ubiquiti_edgerouterx.dtsi"
-
-/ {
- model = "UBNT-ERX";
- compatible = "ubiquiti,edgerouterx", "mediatek,mt7621-soc";
-};
new file mode 100644
@@ -0,0 +1,17 @@
+/dts-v1/;
+
+#include "mt7621_ubnt_edgerouter-x.dtsi"
+
+/ {
+ model = "Ubiquiti EdgeRouter X SFP";
+ compatible = "ubnt,edgerouter-x-sfp", "mediatek,mt7621-soc";
+};
+
+&i2c {
+ status = "okay";
+
+ pca9555@25 {
+ compatible = "nxp,pca9555";
+ reg = <0x25>;
+ };
+};
new file mode 100644
@@ -0,0 +1,8 @@
+/dts-v1/;
+
+#include "mt7621_ubnt_edgerouter-x.dtsi"
+
+/ {
+ model = "Ubiquiti EdgeRouter X";
+ compatible = "ubnt,edgerouter-x", "mediatek,mt7621-soc";
+};
similarity index 100%
rename from target/linux/ramips/dts/mt7621_ubiquiti_edgerouterx.dtsi
rename to target/linux/ramips/dts/mt7621_ubnt_edgerouter-x.dtsi
@@ -768,27 +768,30 @@ define Device/tplink_re650-v1
endef
TARGET_DEVICES += tplink_re650-v1
-define Device/ubiquiti_edgerouterx
+define Device/ubnt_edgerouter_common
+ DEVICE_VENDOR := Ubiquiti
IMAGE_SIZE := 256768k
FILESYSTEMS := squashfs
KERNEL_SIZE := 3145728
KERNEL_INITRAMFS := $$(KERNEL) | \
ubnt-erx-factory-image $(KDIR)/tmp/$$(KERNEL_INITRAMFS_PREFIX)-factory.tar
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
- DEVICE_VENDOR := Ubiquiti
+endef
+
+define Device/ubnt_edgerouter-x
+ $(Device/ubnt_edgerouter_common)
DEVICE_MODEL := EdgeRouter X
- SUPPORTED_DEVICES += ubnt-erx
+ SUPPORTED_DEVICES += ubnt-erx ubiquiti,edgerouterx
endef
-TARGET_DEVICES += ubiquiti_edgerouterx
+TARGET_DEVICES += ubnt_edgerouter-x
-define Device/ubiquiti_edgerouterx-sfp
- $(Device/ubiquiti_edgerouterx)
- DEVICE_VENDOR := Ubiquiti
- DEVICE_MODEL := EdgeRouter X-SFP
+define Device/ubnt_edgerouter-x-sfp
+ $(Device/ubnt_edgerouter_common)
+ DEVICE_MODEL := EdgeRouter X SFP
DEVICE_PACKAGES += kmod-i2c-algo-pca kmod-gpio-pca953x
- SUPPORTED_DEVICES += ubnt-erx-sfp
+ SUPPORTED_DEVICES += ubnt-erx-sfp ubiquiti,edgerouterx-sfp
endef
-TARGET_DEVICES += ubiquiti_edgerouterx-sfp
+TARGET_DEVICES += ubnt_edgerouter-x-sfp
define Device/ubnt_unifi-nanohd
DEVICE_VENDOR := Ubiquiti
@@ -42,8 +42,8 @@ ramips_setup_interfaces()
mikrotik,rb750gr3)
ucidef_set_interfaces_lan_wan "lan2 lan3 lan4 lan5" "wan"
;;
- ubiquiti,edgerouterx|\
- ubiquiti,edgerouterx-sfp)
+ ubnt,edgerouter-x|\
+ ubnt,edgerouter-x-sfp)
ucidef_set_interface_lan "eth0 eth1 eth2 eth3 eth4"
;;
*)
@@ -13,10 +13,10 @@ mikrotik,rb750gr3)
telco-electronics,x1)
ucidef_add_gpio_switch "modem_reset" "Modem Reset" "16"
;;
-ubiquiti,edgerouterx)
+ubnt,edgerouter-x)
ucidef_add_gpio_switch "poe_passthrough" "PoE Passthrough" "0"
;;
-ubiquiti,edgerouterx-sfp)
+ubnt,edgerouter-x-sfp)
ucidef_add_gpio_switch "poe_power_port0" "PoE Power Port0" "496"
ucidef_add_gpio_switch "poe_power_port1" "PoE Power Port1" "497"
ucidef_add_gpio_switch "poe_power_port2" "PoE Power Port2" "498"
@@ -7,8 +7,8 @@ mt7621_bringup_dsa_master() {
local masterif
case "$board" in
- ubiquiti,edgerouterx|\
- ubiquiti,edgerouterx-sfp)
+ ubnt,edgerouter-x|\
+ ubnt,edgerouter-x-sfp)
masterif="dsa"
;;
*)
@@ -61,8 +61,8 @@ platform_do_upgrade() {
iodata_mstc_upgrade_prepare
nand_do_upgrade "$1"
;;
- ubiquiti,edgerouterx|\
- ubiquiti,edgerouterx-sfp)
+ ubnt,edgerouter-x|\
+ ubnt,edgerouter-x-sfp)
platform_upgrade_ubnt_erx "$1"
;;
*)
The "proper" vendor prefix for Ubiquiti is "ubnt", this is used in all targets except ramips and also recommended by the kernel. This patch adjusts the various board/image/device name variables accordingly. Since we touch it anyway, this also adds the space in "EdgeRouter X" as a hyphen to those variables to really make them consistent with the model name. While at it, create a real shared definition for the devices in image/mt7621.mk instead of deriving one device from another. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> --- .../dts/mt7621_ubiquiti_edgerouterx-sfp.dts | 17 -------------- .../dts/mt7621_ubiquiti_edgerouterx.dts | 8 ------- .../dts/mt7621_ubnt_edgerouter-x-sfp.dts | 17 ++++++++++++++ .../ramips/dts/mt7621_ubnt_edgerouter-x.dts | 8 +++++++ ...erx.dtsi => mt7621_ubnt_edgerouter-x.dtsi} | 0 target/linux/ramips/image/mt7621.mk | 23 +++++++++++-------- .../mt7621/base-files/etc/board.d/02_network | 4 ++-- .../base-files/etc/board.d/03_gpio_switches | 4 ++-- .../lib/preinit/07_mt7621_bringup_dsa_master | 4 ++-- .../mt7621/base-files/lib/upgrade/platform.sh | 4 ++-- 10 files changed, 46 insertions(+), 43 deletions(-) delete mode 100644 target/linux/ramips/dts/mt7621_ubiquiti_edgerouterx-sfp.dts delete mode 100644 target/linux/ramips/dts/mt7621_ubiquiti_edgerouterx.dts create mode 100644 target/linux/ramips/dts/mt7621_ubnt_edgerouter-x-sfp.dts create mode 100644 target/linux/ramips/dts/mt7621_ubnt_edgerouter-x.dts rename target/linux/ramips/dts/{mt7621_ubiquiti_edgerouterx.dtsi => mt7621_ubnt_edgerouter-x.dtsi} (100%)