diff mbox series

[OpenWrt-Devel,1/4] Revert "ar71xx: fix Arduino Yun enabling of level shifters outputs"

Message ID 20200305163248.361572-2-mans0n@gorani.run
State New
Headers show
Series ar71xx: improve support for Arduino Yun | expand

Commit Message

Sungbo Eo March 5, 2020, 4:32 p.m. UTC
This reverts commit 077253dd666a30ae5231c3748222d4b5b138593d.

The output enable pins should be disabled by default, and only enabled when
used. Otherwise unwanted conflicts might occur between MCU and SoC pins.

Signed-off-by: Sungbo Eo <mans0n@gorani.run>
---
 target/linux/ar71xx/files/arch/mips/ath79/mach-arduino-yun.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
diff mbox series

Patch

diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-arduino-yun.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-arduino-yun.c
index e92f68f490..5873248edf 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-arduino-yun.c
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-arduino-yun.c
@@ -141,7 +141,7 @@  static void __init ds_setup(void)
 
 	// enable OE of level shifter
 	if (gpio_request_one(DS_GPIO_OE,
-	    GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED, "OE-1") != 0)
+	    GPIOF_OUT_INIT_LOW | GPIOF_EXPORT_DIR_FIXED, "OE-1") != 0)
 		printk("Error setting GPIO OE\n");
 
 	if (gpio_request_one(DS_GPIO_UART_ENA,
@@ -150,7 +150,7 @@  static void __init ds_setup(void)
 
 	// enable OE of level shifter
 	if (gpio_request_one(DS_GPIO_OE2,
-	    GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED, "OE-2") != 0)
+	    GPIOF_OUT_INIT_LOW | GPIOF_EXPORT_DIR_FIXED, "OE-2") != 0)
 		printk("Error setting GPIO OE2\n");
 }