new file mode 100644
@@ -0,0 +1,22 @@
+* Cortina Systems Gemini interrupt controller
+
+This interrupt controller is found on the Gemini SoCs.
+
+Required properties:
+- compatible: must be "cortina,gemini-interrupt-controller"
+- reg: The register bank for the interrupt controller.
+- interrupt-controller: Identifies the node as an interrupt controller
+- #interrupt-cells: The number of cells to define the interrupts.
+ Must be 2 as the controller can specify level or rising edge
+ IRQs. The bindings follows the standard binding for controllers
+ with two cells specified in
+ interrupt-controller/interrupts.txt
+
+Example:
+
+interrupt-controller@48000000 {
+ compatible = "cortina,gemini-interrupt-controller";
+ reg = <0x48000000 0x1000>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+};
This adds device tree bindings for the Cortina Gemini interrupt controller. They are pretty standard. Cc: Janos Laube <janos.dev@gmail.com> Cc: Paulius Zaleckas <paulius.zaleckas@gmail.com> Cc: Hans Ulli Kroll <ulli.kroll@googlemail.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: devicetree@vger.kernel.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org> --- irqchip maintainers: please just apply this when you feel pleased with it. These portions are functionally orthogonal to the series, it is just in a series for context. --- .../cortina,gemini-interrupt-controller.txt | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+) create mode 100644 Documentation/devicetree/bindings/interrupt-controller/cortina,gemini-interrupt-controller.txt