Message ID | 20151030030532.GA10228@makrotopia.org |
---|---|
State | Accepted |
Headers | show |
Hello Daniel, I have this device on my desk (-4G version, with dedicated SIM slot and place for additional 2 antennas for modem, in enclosure). I'm looking for some description of pin headers available on the PCB (I have already asked manufacturer, but I got only "PIN number J1, J9, J10, J11 are not useful, leave it"): - J1 (seems to be JTAG) - J9 (unknown) - J10 (unknown) - J11 (jumper?) Cheers, Piotr 2015-10-30 4:05 GMT+01:00 Daniel Golle <daniel@makrotopia.org>: > Signed-off-by: Daniel Golle <daniel@makrotopia.org> > --- > Note that HIGHMEM support apparently breaks spi-mt7621 and thus access > to the SPI-NOR flash. As a work-around, one can limit the memory > to 256MB which fixes the issue. > > .../linux/ramips/base-files/etc/board.d/02_network | 3 +- > target/linux/ramips/base-files/etc/diag.sh | 3 +- > target/linux/ramips/base-files/lib/ramips.sh | 3 + > .../ramips/base-files/lib/upgrade/platform.sh | 1 + > target/linux/ramips/dts/ZBT-WG2626.dts | 127 +++++++++++++++++++++ > target/linux/ramips/image/Makefile | 7 +- > target/linux/ramips/mt7621/profiles/zbt.mk | 20 ++++ > 7 files changed, 161 insertions(+), 3 deletions(-) > create mode 100644 target/linux/ramips/dts/ZBT-WG2626.dts > create mode 100644 target/linux/ramips/mt7621/profiles/zbt.mk > > diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network > index 0732796..2a26486 100755 > --- a/target/linux/ramips/base-files/etc/board.d/02_network > +++ b/target/linux/ramips/base-files/etc/board.d/02_network > @@ -83,7 +83,8 @@ ramips_setup_interfaces() > wsr-1166|\ > wsr-600|\ > wt1520|\ > - y1) > + y1|\ > + zbt-wg2626) > ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2" > ucidef_add_switch "switch0" "1" "1" > ucidef_add_switch_vlan "switch0" "1" "0 1 2 3 6t" > diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh > index 5376759..e0dd92a 100644 > --- a/target/linux/ramips/base-files/etc/diag.sh > +++ b/target/linux/ramips/base-files/etc/diag.sh > @@ -62,7 +62,8 @@ get_status_led() { > rut5xx|\ > v11st-fe|\ > vocore|\ > - wmr-300) > + wmr-300|\ > + zbt-wg2626) > status_led="$board:green:status" > ;; > atp-52b|\ > diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh > index 4072a31..a0f8e4e 100755 > --- a/target/linux/ramips/base-files/lib/ramips.sh > +++ b/target/linux/ramips/base-files/lib/ramips.sh > @@ -454,6 +454,9 @@ ramips_board_detect() { > *"ZBT-WA05") > name="zbt-wa05" > ;; > + *"ZBT-WG2626") > + name="zbt-wg2626" > + ;; > *"ZBT-WR8305RT") > name="zbt-wr8305rt" > ;; > diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh > index d3d9df3..22120da 100755 > --- a/target/linux/ramips/base-files/lib/upgrade/platform.sh > +++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh > @@ -131,6 +131,7 @@ platform_check_image() { > y1|\ > y1s|\ > zbt-wa05|\ > + zbt-wg2626|\ > zbt-wr8305rt|\ > zte-q7) > [ "$magic" != "27051956" ] && { > diff --git a/target/linux/ramips/dts/ZBT-WG2626.dts b/target/linux/ramips/dts/ZBT-WG2626.dts > new file mode 100644 > index 0000000..6170454 > --- /dev/null > +++ b/target/linux/ramips/dts/ZBT-WG2626.dts > @@ -0,0 +1,127 @@ > +/dts-v1/; > + > +/include/ "mt7621.dtsi" > + > +/ { > + compatible = "mediatek,mt7621-eval-board", "mediatek,mt7621-soc"; > + model = "ZBT-WG2626"; > + > + memory@0 { > + device_type = "memory"; > + reg = <0x0 0x1c000000>, <0x20000000 0x4000000>; > + }; > + > + chosen { > + bootargs = "console=ttyS0,57600"; > + }; > + > + sdhci@10130000 { > + status = "okay"; > + }; > + > + palmbus@1E000000 { > + spi@b00 { > + status = "okay"; > + > + m25p80@0 { > + #address-cells = <1>; > + #size-cells = <1>; > + compatible = "w25q128"; > + reg = <0 0>; > + linux,modalias = "m25p80"; > + spi-max-frequency = <10000000>; > + > + partition@0 { > + label = "u-boot"; > + reg = <0x0 0x30000>; > + read-only; > + }; > + > + partition@30000 { > + label = "u-boot-env"; > + reg = <0x30000 0x10000>; > + read-only; > + }; > + > + factory: partition@40000 { > + label = "factory"; > + reg = <0x40000 0x10000>; > + read-only; > + }; > + > + partition@50000 { > + label = "firmware"; > + reg = <0x50000 0xfb0000>; > + }; > + > + }; > + }; > + > + i2c@900 { > + compatible = "ralink,i2c-mt7621"; > + reg = <0x900 0x100>; > + #address-cells = <1>; > + #size-cells = <0>; > + pinctrl-names = "default"; > + pinctrl-0 = <&i2c_pins>; > + status = "okay"; > + }; > + }; > + > + pcie@1e140000 { > + status = "okay"; > + > + pcie0 { > + mt76@0,0 { > + reg = <0x0000 0 0 0 0>; > + device_type = "pci"; > + mediatek,mtd-eeprom = <&factory 0x8000>; > + mediatek,2ghz = <0>; > + }; > + }; > + > + pcie1 { > + mt76@1,0 { > + reg = <0x0000 0 0 0 0>; > + device_type = "pci"; > + mediatek,mtd-eeprom = <&factory 0x0000>; > + mediatek,5ghz = <0>; > + }; > + }; > + }; > + > + ethernet@1e100000 { > + mtd-mac-address = <&factory 0xe000>; > + }; > + > + gpio-keys-polled { > + compatible = "gpio-keys-polled"; > + #address-cells = <1>; > + #size-cells = <0>; > + poll-interval = <20>; > + > + reset { > + label = "reset"; > + gpios = <&gpio0 18 1>; > + linux,code = <0x198>; > + }; > + }; > + > + gpio-leds { > + compatible = "gpio-leds"; > + > + status { > + label = "zbt-wg2626:green:status"; > + gpios = <&gpio0 24 1>; > + }; > + }; > + > + pinctrl { > + state_default: pinctrl0 { > + gpio { > + ralink,group = "wdt", "rgmii2", "wdt rst", "jtag", "mdio"; > + ralink,function = "gpio"; > + }; > + }; > + }; > +}; > diff --git a/target/linux/ramips/image/Makefile b/target/linux/ramips/image/Makefile > index 5fee8ff..1c03a06 100644 > --- a/target/linux/ramips/image/Makefile > +++ b/target/linux/ramips/image/Makefile > @@ -952,7 +952,7 @@ endif > # > > ifeq ($(SUBTARGET),mt7621) > - TARGET_DEVICES += mt7621 wsr-600 wsr-1166 dir-860l-b1 firewrt pbr-m1 re6500 sap-g3200u3 > + TARGET_DEVICES += mt7621 wsr-600 wsr-1166 dir-860l-b1 firewrt pbr-m1 re6500 sap-g3200u3 zbt-wg2626 > endif > > define Device/mt7621 > @@ -1002,6 +1002,11 @@ define Device/sap-g3200u3 > DTS := SAP-G3200U3 > endef > > +define Device/zbt-wg2626 > + DTS := ZBT-WG2626 > + IMAGE_SIZE := $(ralink_default_fw_size_16M) > +endef > + > # > # MT7628 Profiles > # > diff --git a/target/linux/ramips/mt7621/profiles/zbt.mk b/target/linux/ramips/mt7621/profiles/zbt.mk > new file mode 100644 > index 0000000..e6ef6ad > --- /dev/null > +++ b/target/linux/ramips/mt7621/profiles/zbt.mk > @@ -0,0 +1,20 @@ > +# > +# Copyright (C) 2015 OpenWrt.org > +# > +# This is free software, licensed under the GNU General Public License v2. > +# See /LICENSE for more information. > +# > + > +define Profile/ZBT-WG2626 > + NAME:=ZBT-WG2626 Device > + FEATURES+=rtc > + PACKAGES:=\ > + kmod-usb-core kmod-usb3 kmod-sdhci-mt7620 \ > + kmod-ledtrig-usbdev kmod-ata-core kmod-ata-ahci \ > + kmod-usb3-mt7621 > +endef > + > +define Profile/ZBT-WG2626/Description > + Package set for ZBT-WG2626 device > +endef > +$(eval $(call Profile,ZBT-WG2626)) > -- > 2.6.2 > _______________________________________________ > openwrt-devel mailing list > openwrt-devel@lists.openwrt.org > https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network index 0732796..2a26486 100755 --- a/target/linux/ramips/base-files/etc/board.d/02_network +++ b/target/linux/ramips/base-files/etc/board.d/02_network @@ -83,7 +83,8 @@ ramips_setup_interfaces() wsr-1166|\ wsr-600|\ wt1520|\ - y1) + y1|\ + zbt-wg2626) ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2" ucidef_add_switch "switch0" "1" "1" ucidef_add_switch_vlan "switch0" "1" "0 1 2 3 6t" diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh index 5376759..e0dd92a 100644 --- a/target/linux/ramips/base-files/etc/diag.sh +++ b/target/linux/ramips/base-files/etc/diag.sh @@ -62,7 +62,8 @@ get_status_led() { rut5xx|\ v11st-fe|\ vocore|\ - wmr-300) + wmr-300|\ + zbt-wg2626) status_led="$board:green:status" ;; atp-52b|\ diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh index 4072a31..a0f8e4e 100755 --- a/target/linux/ramips/base-files/lib/ramips.sh +++ b/target/linux/ramips/base-files/lib/ramips.sh @@ -454,6 +454,9 @@ ramips_board_detect() { *"ZBT-WA05") name="zbt-wa05" ;; + *"ZBT-WG2626") + name="zbt-wg2626" + ;; *"ZBT-WR8305RT") name="zbt-wr8305rt" ;; diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh index d3d9df3..22120da 100755 --- a/target/linux/ramips/base-files/lib/upgrade/platform.sh +++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh @@ -131,6 +131,7 @@ platform_check_image() { y1|\ y1s|\ zbt-wa05|\ + zbt-wg2626|\ zbt-wr8305rt|\ zte-q7) [ "$magic" != "27051956" ] && { diff --git a/target/linux/ramips/dts/ZBT-WG2626.dts b/target/linux/ramips/dts/ZBT-WG2626.dts new file mode 100644 index 0000000..6170454 --- /dev/null +++ b/target/linux/ramips/dts/ZBT-WG2626.dts @@ -0,0 +1,127 @@ +/dts-v1/; + +/include/ "mt7621.dtsi" + +/ { + compatible = "mediatek,mt7621-eval-board", "mediatek,mt7621-soc"; + model = "ZBT-WG2626"; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x1c000000>, <0x20000000 0x4000000>; + }; + + chosen { + bootargs = "console=ttyS0,57600"; + }; + + sdhci@10130000 { + status = "okay"; + }; + + palmbus@1E000000 { + spi@b00 { + status = "okay"; + + m25p80@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "w25q128"; + reg = <0 0>; + linux,modalias = "m25p80"; + spi-max-frequency = <10000000>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "u-boot-env"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + label = "firmware"; + reg = <0x50000 0xfb0000>; + }; + + }; + }; + + i2c@900 { + compatible = "ralink,i2c-mt7621"; + reg = <0x900 0x100>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c_pins>; + status = "okay"; + }; + }; + + pcie@1e140000 { + status = "okay"; + + pcie0 { + mt76@0,0 { + reg = <0x0000 0 0 0 0>; + device_type = "pci"; + mediatek,mtd-eeprom = <&factory 0x8000>; + mediatek,2ghz = <0>; + }; + }; + + pcie1 { + mt76@1,0 { + reg = <0x0000 0 0 0 0>; + device_type = "pci"; + mediatek,mtd-eeprom = <&factory 0x0000>; + mediatek,5ghz = <0>; + }; + }; + }; + + ethernet@1e100000 { + mtd-mac-address = <&factory 0xe000>; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <20>; + + reset { + label = "reset"; + gpios = <&gpio0 18 1>; + linux,code = <0x198>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + + status { + label = "zbt-wg2626:green:status"; + gpios = <&gpio0 24 1>; + }; + }; + + pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "wdt", "rgmii2", "wdt rst", "jtag", "mdio"; + ralink,function = "gpio"; + }; + }; + }; +}; diff --git a/target/linux/ramips/image/Makefile b/target/linux/ramips/image/Makefile index 5fee8ff..1c03a06 100644 --- a/target/linux/ramips/image/Makefile +++ b/target/linux/ramips/image/Makefile @@ -952,7 +952,7 @@ endif # ifeq ($(SUBTARGET),mt7621) - TARGET_DEVICES += mt7621 wsr-600 wsr-1166 dir-860l-b1 firewrt pbr-m1 re6500 sap-g3200u3 + TARGET_DEVICES += mt7621 wsr-600 wsr-1166 dir-860l-b1 firewrt pbr-m1 re6500 sap-g3200u3 zbt-wg2626 endif define Device/mt7621 @@ -1002,6 +1002,11 @@ define Device/sap-g3200u3 DTS := SAP-G3200U3 endef +define Device/zbt-wg2626 + DTS := ZBT-WG2626 + IMAGE_SIZE := $(ralink_default_fw_size_16M) +endef + # # MT7628 Profiles # diff --git a/target/linux/ramips/mt7621/profiles/zbt.mk b/target/linux/ramips/mt7621/profiles/zbt.mk new file mode 100644 index 0000000..e6ef6ad --- /dev/null +++ b/target/linux/ramips/mt7621/profiles/zbt.mk @@ -0,0 +1,20 @@ +# +# Copyright (C) 2015 OpenWrt.org +# +# This is free software, licensed under the GNU General Public License v2. +# See /LICENSE for more information. +# + +define Profile/ZBT-WG2626 + NAME:=ZBT-WG2626 Device + FEATURES+=rtc + PACKAGES:=\ + kmod-usb-core kmod-usb3 kmod-sdhci-mt7620 \ + kmod-ledtrig-usbdev kmod-ata-core kmod-ata-ahci \ + kmod-usb3-mt7621 +endef + +define Profile/ZBT-WG2626/Description + Package set for ZBT-WG2626 device +endef +$(eval $(call Profile,ZBT-WG2626))
Signed-off-by: Daniel Golle <daniel@makrotopia.org> --- Note that HIGHMEM support apparently breaks spi-mt7621 and thus access to the SPI-NOR flash. As a work-around, one can limit the memory to 256MB which fixes the issue. .../linux/ramips/base-files/etc/board.d/02_network | 3 +- target/linux/ramips/base-files/etc/diag.sh | 3 +- target/linux/ramips/base-files/lib/ramips.sh | 3 + .../ramips/base-files/lib/upgrade/platform.sh | 1 + target/linux/ramips/dts/ZBT-WG2626.dts | 127 +++++++++++++++++++++ target/linux/ramips/image/Makefile | 7 +- target/linux/ramips/mt7621/profiles/zbt.mk | 20 ++++ 7 files changed, 161 insertions(+), 3 deletions(-) create mode 100644 target/linux/ramips/dts/ZBT-WG2626.dts create mode 100644 target/linux/ramips/mt7621/profiles/zbt.mk