[OpenWrt-Devel,1/3,Lantiq,P2812HNUFX] Remove old dts

Remove unused P2812HNUFX board definition.

Signed-off-by: Sylwester Petela <sscapi@gmail.com>
---

On 27/12/2014 11:32, Sylwester Petela wrote:
> Remove unused P2812HNUFX board definition.
> 
> Signed-off-by: Sylwester Petela <sscapi@gmail.com>
> ---

please change the patch to
* make use of 1 dtsi file and 2 dts files
* after applying your patch 1/3 the tree will not build. please remove
old file at the end of the series




> 
> --- a/target/linux/lantiq/dts/P2812HNUFX.dts
> +++ /dev/null
> @@ -1,308 +0,0 @@
> -/dts-v1/;
> -
> -/include/ "vr9.dtsi"
> -
> -/ {
> -	model = "P2812HNUFX - ZyXEL P-2812HNU-Fx";
> -	
> -	chosen {
> -		/*bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";*/
> -	};
> -
> -	memory@0 {
> -		reg = <0x0 0x8000000>;
> -	};
> -	
> -	fpi@10000000 {
> -		#address-cells = <1>;
> -		#size-cells = <1>;
> -		compatible = "lantiq,fpi", "simple-bus";
> -		ranges = <0x0 0x10000000 0xEEFFFFF>;
> -		reg = <0x10000000 0xEF00000>;
> -
> -		localbus@0 {
> -			#address-cells = <2>;
> -			#size-cells = <1>;
> -			compatible = "lantiq,localbus", "simple-bus";
> -
> -			nand-parts@0 {
> -				compatible = "gen_nand", "lantiq,nand-xway";
> -				lantiq,cs = <1>;
> -				bank-width = <2>;
> -				reg = <0 0x0 0x2000000>;
> -				#address-cells = <1>;
> -				#size-cells = <1>;
> -
> -				partition@0 {
> -					label = "u-boot";
> -					reg = <0x00000 0x40000>;
> -				};
> -
> -				partition@40000 {
> -					label = "u-boot environment";
> -					reg = <0x40000 0x20000>;
> -				};
> -
> -				partition@60000 {
> -					label = "root";
> -					reg = <0x60000 0x7fa0000>;
> -				};
> -			};
> -		};
> -
> -		gpio: pinmux@E100B10 {
> -			compatible = "lantiq,pinctrl-xr9";
> -			pinctrl-names = "default";
> -			pinctrl-0 = <&state_default>;
> -			
> -			interrupt-parent = <&icu0>;
> -			interrupts = <166 135 66 40 41 42 38>;
> -
> -			#gpio-cells = <2>;
> -			gpio-controller;
> -			reg = <0xE100B10 0xA0>;
> -
> -			state_default: pinmux {
> -				mdio {
> -					lantiq,groups = "mdio";
> -					lantiq,function = "mdio";
> -				};
> -				gphy-leds {
> -					lantiq,groups = "gphy0 led1", "gphy1 led1",
> -							"gphy0 led2", "gphy1 led2";
> -					lantiq,function = "gphy";
> -					lantiq,pull = <2>;
> -					lantiq,open-drain = <0>;
> -					lantiq,output = <1>;
> -				};
> -				stp {
> -					lantiq,groups = "stp";
> -					lantiq,function = "stp";
> -					lantiq,pull = <2>;
> -					lantiq,open-drain = <0>;
> -					lantiq,output = <1>;
> -				};
> -				pci {
> -					lantiq,groups = "gnt1", "req1";
> -					lantiq,function = "pci";
> -				};
> -				pci-rst {
> -					lantiq,pins = "io21";
> -					lantiq,pull = <0>;
> -					lantiq,open-drain = <0>;
> -					lantiq,output = <1>;
> -				};
> -				ifxhcd-rst {
> -					lantiq,pins = "io33";
> -					lantiq,pull = <0>;
> -					lantiq,open-drain = <0>;
> -					lantiq,output = <1>;
> -				};
> -				nand {
> -					lantiq,groups = "nand cle", "nand ale",
> -							"nand rd", "nand cs1", "nand rdy";
> -					lantiq,function = "ebu";
> -					lantiq,pull = <1>;
> -				};
> -			};
> -		};
> -
> -		eth@E108000 {
> -			#address-cells = <1>;
> -			#size-cells = <0>;
> -			compatible = "lantiq,xrx200-net";
> -			reg = <	0xE108000 0x3000 /* switch */
> -				0xE10B100 0x70 /* mdio */
> -				0xE10B1D8 0x30 /* mii */
> -				0xE10B308 0x30 /* pmac */
> -			>;
> -			interrupt-parent = <&icu0>;
> -			interrupts = <73 72>;
> -
> -			lan: interface@0 {
> -				compatible = "lantiq,xrx200-pdi";
> -				#address-cells = <1>;
> -				#size-cells = <0>;
> -				reg = <0>;
> -				mac-address = [ 00 11 22 33 44 55 ];
> -				lantiq,switch;
> -
> -				ethernet@0 {
> -					compatible = "lantiq,xrx200-pdi-port";
> -					reg = <0>;
> -					phy-mode = "rgmii";
> -					phy-handle = <&phy0>;
> -				};
> -				ethernet@1 {
> -					compatible = "lantiq,xrx200-pdi-port";
> -					reg = <1>;
> -					phy-mode = "rgmii";
> -					phy-handle = <&phy1>;
> -				};
> -				ethernet@2 {
> -					compatible = "lantiq,xrx200-pdi-port";
> -					reg = <2>;
> -					phy-mode = "gmii";
> -					phy-handle = <&phy11>;
> -				};
> -				ethernet@4 {
> -					compatible = "lantiq,xrx200-pdi-port";
> -					reg = <4>;
> -					phy-mode = "gmii";
> -					phy-handle = <&phy13>;
> -				};
> -				ethernet@5 {
> -					compatible = "lantiq,xrx200-pdi-port";
> -					reg = <5>;
> -					phy-mode = "rgmii";
> -					phy-handle = <&phy5>;
> -				};
> -			};
> -
> -			mdio@0 {
> -				#address-cells = <1>;
> -				#size-cells = <0>;
> -				compatible = "lantiq,xrx200-mdio";
> -				phy0: ethernet-phy@0 {
> -					reg = <0x0>;
> -					compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
> -				};
> -				phy1: ethernet-phy@1 {
> -					reg = <0x1>;
> -					compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
> -				};
> -				phy5: ethernet-phy@5 {
> -					reg = <0x5>;
> -					compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
> -				};
> -				phy11: ethernet-phy@11 {
> -					reg = <0x11>;
> -					compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
> -				};
> -				phy13: ethernet-phy@13 {
> -					reg = <0x13>;
> -					compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
> -				};
> -			};
> -		};
> -
> -		stp: stp@E100BB0 {
> -			compatible = "lantiq,gpio-stp-xway";
> -			reg = <0xE100BB0 0x40>;
> -			#gpio-cells = <2>;
> -			gpio-controller;
> -
> -			lantiq,shadow = <0xffffff>;
> -			lantiq,groups = <0x7>;
> -			/*
> -			lantiq,dsl = <0x3>;
> -			lantiq,phy1 = <0x7>;
> -			lantiq,phy2 = <0x7>;
> -			*/
> -		};
> -
> -		ifxhcd@E101000 {
> -			status = "okay";
> -			gpios = <&gpio 33 0>;
> -			lantiq,portmask = <0x3>;
> -		};
> -
> -		pci@E105400 {
> -			lantiq,bus-clock = <33333333>;
> -			/* lantiq,external-clock; */
> -			lantiq,delay-hi = <0>; /* 0ns delay */
> -			lantiq,delay-lo = <0>; /* 0.0ns delay */
> -			interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
> -			interrupt-map = <
> -				0x7000 0 0 1 &icu0 29 //1 // slot 14, irq 29
> -				>;
> -			gpio-reset = <&gpio 21 0>;
> -			req-mask = <0x1>;	/* GNT1 */
> -			status = "okay";
> -		};
> -	};
> -
> -	gphy-xrx200 {
> -		compatible = "lantiq,phy-xrx200";
> -		firmware = "lantiq/vr9_phy11g_a1x.bin";
> -		phys = [ 00 01 ];
> -	};
> -
> -	gpio-keys-polled {
> -		compatible = "gpio-keys-polled";
> -		#address-cells = <1>;
> -		#size-cells = <0>;
> -		poll-interval = <100>;
> -		reset {
> -			label = "reset";
> -			gpios = <&gpio 39 1>;
> -			linux,code = <0x198>;
> -		};
> -		rfkill {
> -			label = "rfkill";
> -			gpios = <&gpio 1 1>;
> -			linux,code = <0xf7>;
> -		};
> -	};
> -
> -	gpio-leds {
> -		compatible = "gpio-leds";
> -
> -		internet2 {
> -			label = "internet2";
> -			gpios = <&stp 16 1>;
> -		};
> -		internet {
> -			label = "internet";
> -			gpios = <&stp 17 1>;
> -		};
> -		dsl {
> -			label = "dsl";
> -			gpios = <&stp 18 1>;
> -		};
> -		dsl2 {
> -			label = "dsl2";
> -			gpios = <&stp 19 1>;
> -		};
> -		wifi2 {
> -			label = "wifi2";
> -			gpios = <&stp 20 1>;
> -		};
> -		wlan {
> -			label = "wifi";
> -			gpios = <&stp 21 1>;
> -		};
> -		power2 {
> -			label = "power2";
> -			gpios = <&stp 22 1>;
> -		};
> -		power {
> -			label = "power";
> -			gpios = <&stp 23 1>;
> -		};
> -		usb1 {
> -			label = "usb";
> -			gpios = <&gpio 38 1>;
> -		};
> -		usb2 {
> -			label = "usb2";
> -			gpios = <&gpio 44 1>;
> -		};
> -		phone1 {
> -			label = "phone1";
> -			gpios = <&gpio 11 1>;
> -		};
> -		phone1warn {
> -			label = "phone1warn";
> -			gpios = <&gpio 12 1>;
> -		};
> -		phone2 {
> -			label = "phone2";
> -			gpios = <&gpio 28 1>;
> -		};
> -		phone2warn {
> -			label = "phone2warn";
> -			gpios = <&gpio 26 1>;
> -		};
> -	};
> -};
> _______________________________________________
> openwrt-devel mailing list
> openwrt-devel@lists.openwrt.org
> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
>