deleted file mode 100644
@@ -1,28 +0,0 @@
-From 443ab715a40881d6c9ba11b027ba154bac904cb0 Mon Sep 17 00:00:00 2001
-From: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
-Date: Sat, 10 May 2014 23:19:08 +0200
-Subject: [PATCH] MIPS/AR7: ensure that serial ports are properly set up
-
-without UPF_FIXED_TYPE, the data from the PORT_AR7 uart_config entry is
-never copied, resulting in a dead port.
-
-Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
----
- arch/mips/ar7/platform.c | 1 +
- 1 file changed, 1 insertion(+)
-
-diff --git a/arch/mips/ar7/platform.c b/arch/mips/ar7/platform.c
-index 7e2356f..e4f47d3 100644
---- a/arch/mips/ar7/platform.c
-+++ b/arch/mips/ar7/platform.c
-@@ -581,6 +581,7 @@ static int __init ar7_register_uarts(void)
- uart_port.type = PORT_AR7;
- uart_port.uartclk = clk_get_rate(bus_clk) / 2;
- uart_port.iotype = UPIO_MEM32;
-+ uart_port.flags = UPF_FIXED_TYPE;
- uart_port.regshift = 2;
-
- uart_port.line = 0;
-1.8.5.3.2.g3dbf181
-
deleted file mode 100644
@@ -1,22 +0,0 @@
---- a/drivers/mtd/Makefile
-+++ b/drivers/mtd/Makefile
-@@ -16,7 +16,7 @@ obj-$(CONFIG_MTD_OF_PARTS) += ofpart.o
- obj-$(CONFIG_MTD_REDBOOT_PARTS) += redboot.o
- obj-$(CONFIG_MTD_CMDLINE_PARTS) += cmdlinepart.o
- obj-$(CONFIG_MTD_AFS_PARTS) += afs.o
--obj-$(CONFIG_MTD_AR7_PARTS) += ar7part.o
-+obj-$(CONFIG_MTD_AR7_PARTS) += ar7part.o titanpart.o
- obj-$(CONFIG_MTD_BCM63XX_PARTS) += bcm63xxpart.o
- obj-$(CONFIG_MTD_BCM47XX_PARTS) += bcm47xxpart.o
- obj-$(CONFIG_MTD_MYLOADER_PARTS) += myloader.o
---- a/arch/mips/ar7/platform.c
-+++ b/arch/mips/ar7/platform.c
-@@ -199,7 +199,7 @@ static struct resource physmap_flash_res
- .name = "mem",
- .flags = IORESOURCE_MEM,
- .start = 0x10000000,
-- .end = 0x107fffff,
-+ .end = 0x11ffffff,
- };
-
- static const char *ar7_probe_types[] = { "ar7part", NULL };
deleted file mode 100644
@@ -1,28 +0,0 @@
---- a/drivers/char/Kconfig
-+++ b/drivers/char/Kconfig
-@@ -464,6 +464,15 @@ config MWAVE
- To compile this driver as a module, choose M here: the
- module will be called mwave.
-
-+config AR7_GPIO
-+ tristate "TI AR7 GPIO Support"
-+ depends on AR7
-+ help
-+ Give userspace access to the GPIO pins on the Texas Instruments AR7
-+ processors.
-+
-+ If compiled as a module, it will be called ar7_gpio.
-+
- config SCx200_GPIO
- tristate "NatSemi SCx200 GPIO Support"
- depends on SCx200
---- a/drivers/char/Makefile
-+++ b/drivers/char/Makefile
-@@ -43,6 +43,7 @@ obj-$(CONFIG_HW_RANDOM) += hw_random/
- obj-$(CONFIG_PPDEV) += ppdev.o
- obj-$(CONFIG_NWBUTTON) += nwbutton.o
- obj-$(CONFIG_NWFLASH) += nwflash.o
-+obj-$(CONFIG_AR7_GPIO) += ar7_gpio.o
- obj-$(CONFIG_SCx200_GPIO) += scx200_gpio.o
- obj-$(CONFIG_PC8736x_GPIO) += pc8736x_gpio.o
- obj-$(CONFIG_NSC_GPIO) += nsc_gpio.o
deleted file mode 100644
@@ -1,300 +0,0 @@
---- a/drivers/vlynq/vlynq.c
-+++ b/drivers/vlynq/vlynq.c
-@@ -119,20 +119,40 @@ static int vlynq_linked(struct vlynq_dev
- return 0;
- }
-
-+static volatile int vlynq_delay_value_new = 0;
-+
-+static void vlynq_delay_wait(u32 count)
-+{
-+ /* Code adopted from original vlynq driver */
-+ int i = 0;
-+ volatile int *ptr = &vlynq_delay_value_new;
-+ *ptr = 0;
-+
-+ /* We are assuming that the each cycle takes about
-+ * 23 assembly instructions. */
-+ for(i = 0; i < (count + 23)/23; i++)
-+ *ptr = *ptr + 1;
-+}
-+
- static void vlynq_reset(struct vlynq_device *dev)
- {
-+ u32 rtm = readl(&dev->local->revision);
-+
-+ rtm = rtm < 0x00010205 || readl(&dev->local->status) & 0x800 == 0 ?
-+ 0 : 0x600000;
-+
- writel(readl(&dev->local->control) | VLYNQ_CTRL_RESET,
- &dev->local->control);
-
- /* Wait for the devices to finish resetting */
-- msleep(5);
-+ vlynq_delay_wait(0xffffff);
-
- /* Remove reset bit */
-- writel(readl(&dev->local->control) & ~VLYNQ_CTRL_RESET,
-+ writel(readl(&dev->local->control) & ~VLYNQ_CTRL_RESET | rtm,
- &dev->local->control);
-
- /* Give some time for the devices to settle */
-- msleep(5);
-+ vlynq_delay_wait(0xffffff);
- }
-
- static void vlynq_irq_unmask(struct irq_data *d)
-@@ -379,6 +399,61 @@ void vlynq_unregister_driver(struct vlyn
- }
- EXPORT_SYMBOL(vlynq_unregister_driver);
-
-+enum vlynq_clk_src {
-+ vlynq_clk_external,
-+ vlynq_clk_local,
-+ vlynq_clk_remote,
-+ vlynq_clk_invalid,
-+};
-+
-+static int __vlynq_set_clocks(struct vlynq_device *dev,
-+ enum vlynq_clk_src clk_dir,
-+ int lclk_div, int rclk_div)
-+{
-+ u32 reg;
-+
-+ if (clk_dir == vlynq_clk_invalid) {
-+ printk(KERN_ERR "%s: attempt to set invalid clocking\n",
-+ dev_name(&dev->dev));
-+ return -EINVAL;
-+ }
-+
-+ reg = readl(&dev->local->control);
-+ if (readl(&dev->local->revision) < 0x00010205) {
-+ if (clk_dir & vlynq_clk_local)
-+ reg |= VLYNQ_CTRL_CLOCK_INT;
-+ else
-+ reg &= ~VLYNQ_CTRL_CLOCK_INT;
-+ }
-+ reg &= ~VLYNQ_CTRL_CLOCK_MASK;
-+ reg |= VLYNQ_CTRL_CLOCK_DIV(lclk_div);
-+ writel(reg, &dev->local->control);
-+
-+ if (!vlynq_linked(dev))
-+ return -ENODEV;
-+
-+ printk(KERN_INFO "%s: local VLYNQ protocol rev. is 0x%08x\n",
-+ dev_name(&dev->dev), readl(&dev->local->revision));
-+ printk(KERN_INFO "%s: remote VLYNQ protocol rev. is 0x%08x\n",
-+ dev_name(&dev->dev), readl(&dev->remote->revision));
-+
-+ reg = readl(&dev->remote->control);
-+ if (readl(&dev->remote->revision) < 0x00010205) {
-+ if (clk_dir & vlynq_clk_remote)
-+ reg |= VLYNQ_CTRL_CLOCK_INT;
-+ else
-+ reg &= ~VLYNQ_CTRL_CLOCK_INT;
-+ }
-+ reg &= ~VLYNQ_CTRL_CLOCK_MASK;
-+ reg |= VLYNQ_CTRL_CLOCK_DIV(rclk_div);
-+ writel(reg, &dev->remote->control);
-+
-+ if (!vlynq_linked(dev))
-+ return -ENODEV;
-+
-+ return 0;
-+}
-+
- /*
- * A VLYNQ remote device can clock the VLYNQ bus master
- * using a dedicated clock line. In that case, both the
-@@ -392,29 +467,16 @@ static int __vlynq_try_remote(struct vly
- int i;
-
- vlynq_reset(dev);
-- for (i = dev->dev_id ? vlynq_rdiv2 : vlynq_rdiv8; dev->dev_id ?
-- i <= vlynq_rdiv8 : i >= vlynq_rdiv2;
-- dev->dev_id ? i++ : i--) {
-+ for (i = 0; i <= 7; i++) {
-
- if (!vlynq_linked(dev))
- break;
-
-- writel((readl(&dev->remote->control) &
-- ~VLYNQ_CTRL_CLOCK_MASK) |
-- VLYNQ_CTRL_CLOCK_INT |
-- VLYNQ_CTRL_CLOCK_DIV(i - vlynq_rdiv1),
-- &dev->remote->control);
-- writel((readl(&dev->local->control)
-- & ~(VLYNQ_CTRL_CLOCK_INT |
-- VLYNQ_CTRL_CLOCK_MASK)) |
-- VLYNQ_CTRL_CLOCK_DIV(i - vlynq_rdiv1),
-- &dev->local->control);
--
-- if (vlynq_linked(dev)) {
-- printk(KERN_DEBUG
-- "%s: using remote clock divisor %d\n",
-- dev_name(&dev->dev), i - vlynq_rdiv1 + 1);
-- dev->divisor = i;
-+ if (!__vlynq_set_clocks(dev, vlynq_clk_remote, i, i)) {
-+ printk(KERN_INFO
-+ "%s: using remote clock divisor %d\n",
-+ dev_name(&dev->dev), i + 1);
-+ dev->divisor = i + vlynq_rdiv1;
- return 0;
- } else {
- vlynq_reset(dev);
-@@ -433,25 +495,17 @@ static int __vlynq_try_remote(struct vly
- */
- static int __vlynq_try_local(struct vlynq_device *dev)
- {
-- int i;
-+ int i, dir = !dev->dev_id;
-
- vlynq_reset(dev);
-
-- for (i = dev->dev_id ? vlynq_ldiv2 : vlynq_ldiv8; dev->dev_id ?
-- i <= vlynq_ldiv8 : i >= vlynq_ldiv2;
-- dev->dev_id ? i++ : i--) {
--
-- writel((readl(&dev->local->control) &
-- ~VLYNQ_CTRL_CLOCK_MASK) |
-- VLYNQ_CTRL_CLOCK_INT |
-- VLYNQ_CTRL_CLOCK_DIV(i - vlynq_ldiv1),
-- &dev->local->control);
--
-- if (vlynq_linked(dev)) {
-- printk(KERN_DEBUG
-- "%s: using local clock divisor %d\n",
-- dev_name(&dev->dev), i - vlynq_ldiv1 + 1);
-- dev->divisor = i;
-+ for (i = dir ? 7 : 0; dir ? i >= 0 : i <= 7; dir ? i-- : i++) {
-+
-+ if (!__vlynq_set_clocks(dev, vlynq_clk_local, i, 0)) {
-+ printk(KERN_INFO
-+ "%s: using local clock divisor %d\n",
-+ dev_name(&dev->dev), i + 1);
-+ dev->divisor = i + vlynq_ldiv1;
- return 0;
- } else {
- vlynq_reset(dev);
-@@ -473,18 +527,10 @@ static int __vlynq_try_external(struct v
- if (!vlynq_linked(dev))
- return -ENODEV;
-
-- writel((readl(&dev->remote->control) &
-- ~VLYNQ_CTRL_CLOCK_INT),
-- &dev->remote->control);
--
-- writel((readl(&dev->local->control) &
-- ~VLYNQ_CTRL_CLOCK_INT),
-- &dev->local->control);
--
-- if (vlynq_linked(dev)) {
-- printk(KERN_DEBUG "%s: using external clock\n",
-- dev_name(&dev->dev));
-- dev->divisor = vlynq_div_external;
-+ if (!__vlynq_set_clocks(dev, vlynq_clk_external, 0, 0)) {
-+ printk(KERN_INFO "%s: using external clock\n",
-+ dev_name(&dev->dev));
-+ dev->divisor = vlynq_div_external;
- return 0;
- }
-
-@@ -501,24 +547,16 @@ static int __vlynq_enable_device(struct
- return result;
-
- switch (dev->divisor) {
-- case vlynq_div_external:
- case vlynq_div_auto:
- /* When the device is brought from reset it should have clock
- * generation negotiated by hardware.
- * Check which device is generating clocks and perform setup
- * accordingly */
-- if (vlynq_linked(dev) && readl(&dev->remote->control) &
-- VLYNQ_CTRL_CLOCK_INT) {
-- if (!__vlynq_try_remote(dev) ||
-- !__vlynq_try_local(dev) ||
-- !__vlynq_try_external(dev))
-- return 0;
-- } else {
-- if (!__vlynq_try_external(dev) ||
-- !__vlynq_try_local(dev) ||
-- !__vlynq_try_remote(dev))
-- return 0;
-- }
-+ if (!__vlynq_try_remote(dev) || !__vlynq_try_local(dev))
-+ return 0;
-+ case vlynq_div_external:
-+ if (!__vlynq_try_external(dev))
-+ return 0;
- break;
- case vlynq_ldiv1:
- case vlynq_ldiv2:
-@@ -528,15 +566,12 @@ static int __vlynq_enable_device(struct
- case vlynq_ldiv6:
- case vlynq_ldiv7:
- case vlynq_ldiv8:
-- writel(VLYNQ_CTRL_CLOCK_INT |
-- VLYNQ_CTRL_CLOCK_DIV(dev->divisor -
-- vlynq_ldiv1), &dev->local->control);
-- writel(0, &dev->remote->control);
-- if (vlynq_linked(dev)) {
-- printk(KERN_DEBUG
-- "%s: using local clock divisor %d\n",
-- dev_name(&dev->dev),
-- dev->divisor - vlynq_ldiv1 + 1);
-+ if (!__vlynq_set_clocks(dev, vlynq_clk_local, dev->divisor -
-+ vlynq_ldiv1, 0)) {
-+ printk(KERN_INFO
-+ "%s: using local clock divisor %d\n",
-+ dev_name(&dev->dev),
-+ dev->divisor - vlynq_ldiv1 + 1);
- return 0;
- }
- break;
-@@ -548,20 +583,17 @@ static int __vlynq_enable_device(struct
- case vlynq_rdiv6:
- case vlynq_rdiv7:
- case vlynq_rdiv8:
-- writel(0, &dev->local->control);
-- writel(VLYNQ_CTRL_CLOCK_INT |
-- VLYNQ_CTRL_CLOCK_DIV(dev->divisor -
-- vlynq_rdiv1), &dev->remote->control);
-- if (vlynq_linked(dev)) {
-- printk(KERN_DEBUG
-- "%s: using remote clock divisor %d\n",
-- dev_name(&dev->dev),
-- dev->divisor - vlynq_rdiv1 + 1);
-+ if (!__vlynq_set_clocks(dev, vlynq_clk_remote, 0,
-+ dev->divisor - vlynq_rdiv1)) {
-+ printk(KERN_INFO
-+ "%s: using remote clock divisor %d\n",
-+ dev_name(&dev->dev),
-+ dev->divisor - vlynq_rdiv1 + 1);
- return 0;
- }
- break;
- }
--
-+ vlynq_reset(dev);
- ops->off(dev);
- return -ENODEV;
- }
-@@ -732,14 +764,14 @@ static int vlynq_probe(struct platform_d
- platform_set_drvdata(pdev, dev);
-
- printk(KERN_INFO "%s: regs 0x%p, irq %d, mem 0x%p\n",
-- dev_name(&dev->dev), (void *)dev->regs_start, dev->irq,
-- (void *)dev->mem_start);
-+ dev_name(&dev->dev), (void *)dev->regs_start,
-+ dev->irq, (void *)dev->mem_start);
-
- dev->dev_id = 0;
- dev->divisor = vlynq_div_auto;
-- result = __vlynq_enable_device(dev);
-- if (result == 0) {
-+ if (!__vlynq_enable_device(dev)) {
- dev->dev_id = readl(&dev->remote->chip);
-+ vlynq_reset(dev);
- ((struct plat_vlynq_ops *)(dev->dev.platform_data))->off(dev);
- }
- if (dev->dev_id)
deleted file mode 100644
@@ -1,15 +0,0 @@
---- a/arch/mips/ar7/memory.c
-+++ b/arch/mips/ar7/memory.c
-@@ -66,5 +66,11 @@ void __init prom_meminit(void)
-
- void __init prom_free_prom_memory(void)
- {
-- /* Nothing to free */
-+ /* adapted from arch/mips/txx9/generic/setup.c */
-+ unsigned long saddr = PHYS_OFFSET + PAGE_SIZE;
-+ unsigned long eaddr = __pa_symbol(&_text);
-+
-+ /* free memory between prom-record and kernel _text base */
-+ if (saddr < eaddr)
-+ free_init_pages("prom memory", saddr, eaddr);
- }
deleted file mode 100644
@@ -1,85 +0,0 @@
---- a/arch/mips/ar7/Platform
-+++ b/arch/mips/ar7/Platform
-@@ -3,4 +3,9 @@
- #
- platform-$(CONFIG_AR7) += ar7/
- cflags-$(CONFIG_AR7) += -I$(srctree)/arch/mips/include/asm/mach-ar7
--load-$(CONFIG_AR7) += 0xffffffff94100000
-+load-$(CONFIG_AR7_TI) += 0xffffffff94100000
-+
-+#
-+# AudioCodes AC49x
-+#
-+load-$(CONFIG_AR7_AC49X) += 0xffffffff945ca000
---- a/arch/mips/ar7/setup.c
-+++ b/arch/mips/ar7/setup.c
-@@ -69,6 +69,10 @@ const char *get_system_type(void)
- return "TI AR7 (TNETV1056)";
- case TITAN_CHIP_1060:
- return "TI AR7 (TNETV1060)";
-+ case TITAN_CHIP_AC495:
-+ return "AudioCodes AC495";
-+ case TITAN_CHIP_AC496:
-+ return "AudioCodes AC496";
- }
- default:
- return "TI AR7 (unknown)";
---- a/arch/mips/include/asm/mach-ar7/ar7.h
-+++ b/arch/mips/include/asm/mach-ar7/ar7.h
-@@ -92,6 +92,8 @@
- #define TITAN_CHIP_1055 0x0e
- #define TITAN_CHIP_1056 0x0d
- #define TITAN_CHIP_1060 0x07
-+#define TITAN_CHIP_AC495 0x00
-+#define TITAN_CHIP_AC496 0x02
-
- /* Interrupts */
- #define AR7_IRQ_UART0 15
---- a/arch/mips/Kconfig
-+++ b/arch/mips/Kconfig
-@@ -86,7 +86,7 @@ config AR7
- select HAVE_CLK
- help
- Support for the Texas Instruments AR7 System-on-a-Chip
-- family: TNETD7100, 7200 and 7300.
-+ family: TI TNETD7100, 7200, 7300 and AudioCodes AC49x.
-
- config ATH79
- bool "Atheros AR71XX/AR724X/AR913X based boards"
-@@ -839,6 +839,7 @@ config NLM_XLP_BOARD
- endchoice
-
- source "arch/mips/alchemy/Kconfig"
-+source "arch/mips/ar7/Kconfig"
- source "arch/mips/ath79/Kconfig"
- source "arch/mips/bcm47xx/Kconfig"
- source "arch/mips/bcm63xx/Kconfig"
---- /dev/null
-+++ b/arch/mips/ar7/Kconfig
-@@ -0,0 +1,26 @@
-+if AR7
-+
-+config AR7_TI
-+ bool
-+
-+config AR7_AC49X
-+ bool
-+
-+choice
-+ prompt "AR7 SoC family selection"
-+ default AR7_TYPE_TI
-+ depends on AR7
-+ help
-+ Select AR7 MIPS SoC implementation.
-+
-+ config AR7_TYPE_TI
-+ bool "Texas Instruments AR7"
-+ select AR7_TI
-+
-+ config AR7_TYPE_AC49X
-+ bool "AudioCodes AC49X"
-+ select AR7_AC49X
-+
-+endchoice
-+
-+endif
deleted file mode 100644
@@ -1,20 +0,0 @@
---- a/arch/mips/ar7/prom.c
-+++ b/arch/mips/ar7/prom.c
-@@ -70,6 +70,7 @@ struct psbl_rec {
- };
-
- static const char psp_env_version[] __initconst = "TIENV0.8";
-+static const char psp_env_version_ac49x[] __initconst = "MaxENV0.2";
-
- struct psp_env_chunk {
- u8 num;
-@@ -186,7 +187,8 @@ static void __init ar7_init_env(struct e
- struct psbl_rec *psbl = (struct psbl_rec *)(KSEG1ADDR(0x14000300));
- void *psp_env = (void *)KSEG1ADDR(psbl->env_base);
-
-- if (strcmp(psp_env, psp_env_version) == 0) {
-+ if (strcmp(psp_env, psp_env_version) == 0 ||
-+ strcmp(psp_env, psp_env_version_ac49x) == 0) {
- parse_psp_env(psp_env);
- } else {
- for (i = 0; i < MAX_ENTRY; i++, env++)
deleted file mode 100644
@@ -1,35 +0,0 @@
---- a/drivers/mtd/Kconfig
-+++ b/drivers/mtd/Kconfig
-@@ -192,6 +192,11 @@ config MTD_OF_PARTS
- the partition map from the children of the flash node,
- as described in Documentation/devicetree/booting-without-of.txt.
-
-+config MTD_AC49X_PARTS
-+ tristate "AudioCodes AC49X partitioning support"
-+ ---help---
-+ AudioCodes AC49X partitioning support
-+
- config MTD_AR7_PARTS
- tristate "TI AR7 partitioning support"
- ---help---
---- a/drivers/mtd/Makefile
-+++ b/drivers/mtd/Makefile
-@@ -15,6 +15,7 @@ mtd-$(CONFIG_MTD_SPLIT_LZMA_FW) += mtdsp
- obj-$(CONFIG_MTD_OF_PARTS) += ofpart.o
- obj-$(CONFIG_MTD_REDBOOT_PARTS) += redboot.o
- obj-$(CONFIG_MTD_CMDLINE_PARTS) += cmdlinepart.o
-+obj-$(CONFIG_MTD_AC49X_PARTS) += ac49xpart.o
- obj-$(CONFIG_MTD_AFS_PARTS) += afs.o
- obj-$(CONFIG_MTD_AR7_PARTS) += ar7part.o titanpart.o
- obj-$(CONFIG_MTD_BCM63XX_PARTS) += bcm63xxpart.o
---- a/arch/mips/ar7/platform.c
-+++ b/arch/mips/ar7/platform.c
-@@ -202,7 +202,7 @@ static struct resource physmap_flash_res
- .end = 0x11ffffff,
- };
-
--static const char *ar7_probe_types[] = { "ar7part", NULL };
-+static const char *ar7_probe_types[] = { "ac49xpart", "ar7part", NULL };
-
- static struct physmap_flash_data physmap_flash_data = {
- .width = 2,
deleted file mode 100644
@@ -1,28 +0,0 @@
---- a/drivers/tty/serial/8250/8250_core.c
-+++ b/drivers/tty/serial/8250/8250_core.c
-@@ -323,6 +323,13 @@ static const struct serial8250_config ua
- .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
- .flags = UART_CAP_FIFO | UART_CAP_AFE,
- },
-+ [PORT_AR7] = {
-+ .name = "TI-AR7",
-+ .fifo_size = 16,
-+ .tx_loadsz = 16,
-+ .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_00,
-+ .flags = UART_CAP_FIFO | UART_CAP_AFE,
-+ },
- };
-
- /* Uart divisor latch read */
-@@ -2843,7 +2850,11 @@ static void serial8250_console_putchar(s
- struct uart_8250_port *up =
- container_of(port, struct uart_8250_port, port);
-
-+#ifdef CONFIG_AR7
-+ wait_for_xmitr(up, BOTH_EMPTY);
-+#else
- wait_for_xmitr(up, UART_LSR_THRE);
-+#endif
- serial_port_out(port, UART_TX, ch);
- }
-
deleted file mode 100644
@@ -1,118 +0,0 @@
---- a/drivers/mtd/ar7part.c
-+++ b/drivers/mtd/ar7part.c
-@@ -30,11 +30,14 @@
-
- #include <uapi/linux/magic.h>
-
-+#include <asm/mach-ar7/prom.h>
-+
- #define AR7_PARTS 4
- #define ROOT_OFFSET 0xe0000
-
- #define LOADER_MAGIC1 le32_to_cpu(0xfeedfa42)
- #define LOADER_MAGIC2 le32_to_cpu(0xfeed1281)
-+#define LOADER_MAGIC3 le32_to_cpu(0x434d4d4c)
-
- struct ar7_bin_rec {
- unsigned int checksum;
-@@ -42,12 +45,16 @@ struct ar7_bin_rec {
- unsigned int address;
- };
-
-+int create_titan_partitions(struct mtd_info *master,
-+ struct mtd_partition **pparts,
-+ struct mtd_part_parser_data *data);
-+
- static int create_mtd_partitions(struct mtd_info *master,
- struct mtd_partition **pparts,
- struct mtd_part_parser_data *data)
- {
- struct ar7_bin_rec header;
-- unsigned int offset;
-+ unsigned int offset, mtd_start, mtd_end;
- size_t len;
- unsigned int pre_size = master->erasesize, post_size = 0;
- unsigned int root_offset = ROOT_OFFSET;
-@@ -55,6 +62,16 @@ static int create_mtd_partitions(struct
- int retries = 10;
- struct mtd_partition *ar7_parts;
-
-+ const char *prom_str = prom_getenv("ProductID");
-+ char mtd_name[] = "mtd1";
-+ if(prom_str &&
-+ (strcmp(prom_str, "CYWL")==0 ||
-+ strcmp(prom_str, "CYWM")==0 ||
-+ strcmp(prom_str, "CYLM")==0 ||
-+ strcmp(prom_str, "CYLL")==0)){
-+ return create_titan_partitions(master, pparts, data);
-+ }
-+
- ar7_parts = kzalloc(sizeof(*ar7_parts) * AR7_PARTS, GFP_KERNEL);
- if (!ar7_parts)
- return -ENOMEM;
-@@ -83,34 +100,39 @@ static int create_mtd_partitions(struct
-
- pre_size = offset;
-
-- if (!ar7_parts[1].offset) {
-- ar7_parts[1].offset = master->size - master->erasesize;
-- post_size = master->erasesize;
-- }
--
- switch (header.checksum) {
-- case LOADER_MAGIC1:
-- while (header.length) {
-- offset += sizeof(header) + header.length;
-- mtd_read(master, offset, sizeof(header), &len,
-- (uint8_t *)&header);
-- }
-- root_offset = offset + sizeof(header) + 4;
-- break;
- case LOADER_MAGIC2:
-+ for (retries = 0; retries <= 9; retries++) {
-+ mtd_name[3] = '0' + retries;
-+ prom_str = prom_getenv(mtd_name);
-+ if (prom_str == NULL)
-+ continue;
-+ sscanf(prom_str, "%i,%i", &mtd_start, &mtd_end);
-+ if (pre_size == (mtd_start & 0x1ffffff)) {
-+ ar7_parts[1].offset = mtd_end &= 0x1ffffff;
-+ ar7_parts[1].size = post_size = master->size - mtd_end;
-+ break;
-+ }
-+ }
-+ case LOADER_MAGIC1:
-+ root_offset = (header.checksum == LOADER_MAGIC1) ? 4 : 0;
- while (header.length) {
- offset += sizeof(header) + header.length;
- mtd_read(master, offset, sizeof(header), &len,
- (uint8_t *)&header);
- }
-- root_offset = offset + sizeof(header) + 4 + 0xff;
-- root_offset &= ~(uint32_t)0xff;
-+ root_offset += offset + sizeof(header);
- break;
- default:
- printk(KERN_WARNING "Unknown magic: %08x\n", header.checksum);
- break;
- }
-
-+ if (!ar7_parts[1].offset) {
-+ post_size = master->erasesize;
-+ ar7_parts[1].offset = master->size - post_size;
-+ }
-+
- mtd_read(master, root_offset, sizeof(header), &len, (u8 *)&header);
- if (header.checksum != SQUASHFS_MAGIC) {
- root_offset += master->erasesize - 1;
---- a/drivers/mtd/titanpart.c
-+++ b/drivers/mtd/titanpart.c
-@@ -149,7 +149,7 @@ static void titan_add_partition(char * e
- }
- int create_titan_partitions(struct mtd_info *master,
- struct mtd_partition **pparts,
-- unsigned long origin)
-+ struct mtd_part_parser_data *data)
- {
- struct nsp_img_hdr_head hdr;
- struct nsp_img_hdr_section_info sect_info;
deleted file mode 100644
@@ -1,95 +0,0 @@
---- a/arch/mips/ar7/platform.c
-+++ b/arch/mips/ar7/platform.c
-@@ -465,31 +465,22 @@ static struct gpio_led fb_fon_leds[] = {
- },
- };
-
--static struct gpio_led gt701_leds[] = {
-+static struct gpio_led actiontec_leds[] = {
- {
- .name = "inet:green",
- .gpio = 13,
-- .active_low = 1,
-- },
-- {
-- .name = "usb",
-- .gpio = 12,
-- .active_low = 1,
- },
- {
- .name = "inet:red",
- .gpio = 9,
-- .active_low = 1,
- },
- {
-- .name = "power:red",
-+ .name = "power:green",
- .gpio = 7,
-- .active_low = 1,
- },
- {
-- .name = "power:green",
-+ .name = "power:red",
- .gpio = 8,
-- .active_low = 1,
- .default_trigger = "default-on",
- },
- {
-@@ -497,6 +488,44 @@ static struct gpio_led gt701_leds[] = {
- .gpio = 10,
- .active_low = 1,
- },
-+ {
-+ .name = "wifi",
-+ .gpio = 6,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "wifi:red",
-+ .gpio = 3,
-+ },
-+ {
-+ .name = "standby",
-+ .gpio = 4,
-+ },
-+ {
-+ .name = "wps",
-+ .gpio = 16,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "usb",
-+ .gpio = 12,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "voip",
-+ .gpio = 15,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "line1",
-+ .gpio = 23,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "line2",
-+ .gpio = 25,
-+ .active_low = 1,
-+ },
- };
-
- static struct gpio_led_platform_data ar7_led_data;
-@@ -540,9 +569,9 @@ static void __init detect_leds(void)
- } else if (strstr(prid, "CYWM") || strstr(prid, "CYWL")) {
- ar7_led_data.num_leds = ARRAY_SIZE(titan_leds);
- ar7_led_data.leds = titan_leds;
-- } else if (strstr(prid, "GT701")) {
-- ar7_led_data.num_leds = ARRAY_SIZE(gt701_leds);
-- ar7_led_data.leds = gt701_leds;
-+ } else if (strstr(prid, "GT7") || strstr(prid, "PK5000")) {
-+ ar7_led_data.num_leds = ARRAY_SIZE(actiontec_leds);
-+ ar7_led_data.leds = actiontec_leds;
- }
- }
-
deleted file mode 100644
@@ -1,52 +0,0 @@
---- a/drivers/net/ethernet/ti/cpmac.c
-+++ b/drivers/net/ethernet/ti/cpmac.c
-@@ -1155,6 +1155,8 @@ static int cpmac_probe(struct platform_d
- goto fail;
- }
-
-+ ar7_device_reset(pdata->reset_bit);
-+
- dev->irq = platform_get_irq_byname(pdev, "irq");
-
- dev->netdev_ops = &cpmac_netdev_ops;
-@@ -1233,7 +1235,7 @@ int cpmac_init(void)
- cpmac_mii->reset = cpmac_mdio_reset;
- cpmac_mii->irq = mii_irqs;
-
-- cpmac_mii->priv = ioremap(AR7_REGS_MDIO, 256);
-+ cpmac_mii->priv = ioremap(ar7_is_titan() ? TITAN_REGS_MDIO : AR7_REGS_MDIO, 256);
-
- if (!cpmac_mii->priv) {
- printk(KERN_ERR "Can't ioremap mdio registers\n");
-@@ -1244,10 +1246,16 @@ int cpmac_init(void)
- #warning FIXME: unhardcode gpio&reset bits
- ar7_gpio_disable(26);
- ar7_gpio_disable(27);
-- ar7_device_reset(AR7_RESET_BIT_CPMAC_LO);
-- ar7_device_reset(AR7_RESET_BIT_CPMAC_HI);
-+
-+ if (!ar7_is_titan()) {
-+ ar7_device_reset(AR7_RESET_BIT_CPMAC_LO);
-+ ar7_device_reset(AR7_RESET_BIT_CPMAC_HI);
-+ }
- ar7_device_reset(AR7_RESET_BIT_EPHY);
-
-+ if (ar7_is_titan())
-+ ar7_device_reset(TITAN_RESET_BIT_EPHY1);
-+
- cpmac_mii->reset(cpmac_mii);
-
- for (i = 0; i < 300; i++) {
-@@ -1264,7 +1272,11 @@ int cpmac_init(void)
- mask = 0;
- }
-
-- cpmac_mii->phy_mask = ~(mask | 0x80000000);
-+ if (ar7_is_titan())
-+ cpmac_mii->phy_mask = ~(mask | 0x80000000 | 0x40000000);
-+ else
-+ cpmac_mii->phy_mask = ~(mask | 0x80000000);
-+
- snprintf(cpmac_mii->id, MII_BUS_ID_SIZE, "cpmac-1");
-
- res = mdiobus_register(cpmac_mii);
The config-3.10 got removed in r43632, so bye-bye to patches-3.10 as well. Signed-off-by: Sedat Dilek <sedat.dilek@gmail.com> --- .../ar7/patches-3.10/001-mips-ar7-fix-serial.patch | 28 -- target/linux/ar7/patches-3.10/110-flash.patch | 22 -- .../linux/ar7/patches-3.10/120-gpio_chrdev.patch | 28 -- .../patches-3.10/160-vlynq_try_remote_first.patch | 300 --------------------- .../200-free-mem-below-kernel-offset.patch | 15 -- .../ar7/patches-3.10/300-add-ac49x-platform.patch | 85 ------ .../ar7/patches-3.10/310-ac49x-prom-support.patch | 20 -- .../patches-3.10/320-ac49x-mtd-partitions.patch | 35 --- .../linux/ar7/patches-3.10/500-serial_kludge.patch | 28 -- target/linux/ar7/patches-3.10/920-ar7part.patch | 118 -------- .../ar7/patches-3.10/925-actiontec_leds.patch | 95 ------- .../linux/ar7/patches-3.10/950-cpmac_titan.patch | 52 ---- 12 files changed, 826 deletions(-) delete mode 100644 target/linux/ar7/patches-3.10/001-mips-ar7-fix-serial.patch delete mode 100644 target/linux/ar7/patches-3.10/110-flash.patch delete mode 100644 target/linux/ar7/patches-3.10/120-gpio_chrdev.patch delete mode 100644 target/linux/ar7/patches-3.10/160-vlynq_try_remote_first.patch delete mode 100644 target/linux/ar7/patches-3.10/200-free-mem-below-kernel-offset.patch delete mode 100644 target/linux/ar7/patches-3.10/300-add-ac49x-platform.patch delete mode 100644 target/linux/ar7/patches-3.10/310-ac49x-prom-support.patch delete mode 100644 target/linux/ar7/patches-3.10/320-ac49x-mtd-partitions.patch delete mode 100644 target/linux/ar7/patches-3.10/500-serial_kludge.patch delete mode 100644 target/linux/ar7/patches-3.10/920-ar7part.patch delete mode 100644 target/linux/ar7/patches-3.10/925-actiontec_leds.patch delete mode 100644 target/linux/ar7/patches-3.10/950-cpmac_titan.patch