From patchwork Wed Dec 23 13:12:00 2015 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Tathagata Das X-Patchwork-Id: 560543 Return-Path: X-Original-To: incoming@patchwork.ozlabs.org Delivered-To: patchwork-incoming@bilbo.ozlabs.org Received: from arrakis.dune.hu (arrakis.dune.hu [78.24.191.176]) (using TLSv1.2 with cipher AECDH-AES256-SHA (256/256 bits)) (No client certificate requested) by ozlabs.org (Postfix) with ESMTPS id 370BD140BBB for ; Thu, 24 Dec 2015 00:12:14 +1100 (AEDT) Received: from arrakis.dune.hu (localhost [127.0.0.1]) by arrakis.dune.hu (Postfix) with ESMTP id 16E22280AE5; Wed, 23 Dec 2015 14:11:47 +0100 (CET) X-Spam-Checker-Version: SpamAssassin 3.3.2 (2011-06-06) on arrakis.dune.hu X-Spam-Level: X-Spam-Status: No, score=-2.6 required=5.0 tests=BAYES_00,RP_MATCHES_RCVD autolearn=unavailable version=3.3.2 Received: from arrakis.dune.hu (localhost [127.0.0.1]) by arrakis.dune.hu (Postfix) with ESMTP id DFEA6280969; Wed, 23 Dec 2015 14:11:36 +0100 (CET) X-policyd-weight: using cached result; rate: -4.2 Received: from alumnux.com (gw.alumnux.com [182.74.215.94]) by arrakis.dune.hu (Postfix) with ESMTPS; Wed, 23 Dec 2015 14:11:36 +0100 (CET) Received: from LAPTOP3Q5V1VC3 ([192.168.11.51]) by alumnux.com (8.12.5/8.12.5) with ESMTP id tBNDOnNb014201; Wed, 23 Dec 2015 18:54:49 +0530 From: "Tathagata Das" To: "'John Crispin'" , References: <005901d13653$0d1720a0$274561e0$@alumnux.com> <567A9BDC.2030607@openwrt.org> In-Reply-To: <567A9BDC.2030607@openwrt.org> Date: Wed, 23 Dec 2015 18:42:00 +0530 Message-ID: <014501d13d83$823bc3e0$86b34ba0$@alumnux.com> MIME-Version: 1.0 X-Mailer: Microsoft Outlook 14.0 Thread-Index: AQJpqNEejpUNRY1wtEcnl/BWQp/bzwFsaN9TnZxQTXA= Content-Language: en-in Subject: Re: [OpenWrt-Devel] [Patch] ipq806x: add support for Netgear D7800 X-BeenThere: openwrt-devel@lists.openwrt.org X-Mailman-Version: 2.1.15 Precedence: list List-Id: OpenWrt Development List List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: openwrt-devel-bounces@lists.openwrt.org Sender: "openwrt-devel" Hi John, Please check the content of the patch below. ---------------------------------------------- Index: trunk/target/linux/ipq806x/base-files/lib/upgrade/platform.sh =================================================================== --- trunk/target/linux/ipq806x/base-files/lib/upgrade/platform.sh (revision 47890) +++ trunk/target/linux/ipq806x/base-files/lib/upgrade/platform.sh (working copy) @@ -7,7 +7,8 @@ case "$board" in AP148 |\ - r7500) + r7500 |\ + d7800) nand_do_platform_check $board $1 return $?; ;; @@ -21,7 +22,8 @@ case "$board" in AP148 |\ - r7500) + r7500 |\ + d7800) nand_do_upgrade "$1" ;; esac Index: trunk/target/linux/ipq806x/base-files/lib/ipq806x.sh =================================================================== --- trunk/target/linux/ipq806x/base-files/lib/ipq806x.sh (revision 47890) +++ trunk/target/linux/ipq806x/base-files/lib/ipq806x.sh (working copy) @@ -23,6 +23,9 @@ *"R7500") name="r7500" ;; + *"D7800") + name="d7800" + ;; esac [ -z "$name" ] && name="unknown" Index: trunk/target/linux/ipq806x/base-files/etc/board.d/01_leds =================================================================== --- trunk/target/linux/ipq806x/base-files/etc/board.d/01_leds (revision 47890) +++ trunk/target/linux/ipq806x/base-files/etc/board.d/01_leds (working copy) @@ -11,7 +11,8 @@ board=$(ipq806x_board_name) case "$board" in -r7500) +r7500 |\ +d7800) ucidef_set_led_usbdev "usb1" "USB 1" "r7500:white:usb1" "1-1" ucidef_set_led_usbdev "usb2" "USB 2" "r7500:white:usb3" "3-1" ucidef_set_led_netdev "wan" "WAN" "r7500:white:wan" "eth0" Index: trunk/target/linux/ipq806x/base-files/etc/board.d/02_network =================================================================== --- trunk/target/linux/ipq806x/base-files/etc/board.d/02_network (revision 47890) +++ trunk/target/linux/ipq806x/base-files/etc/board.d/02_network (working copy) @@ -13,7 +13,8 @@ case "$board" in ap148 |\ -r7500) +r7500 |\ +d7800) ucidef_add_switch "switch0" \ "1:lan" "2:lan" "3:lan" "4:lan" "6@eth1" "5:wan" "0@eth0" ;; Index: trunk/target/linux/ipq806x/patches-3.18/801-ARM-qcom-add-Netgear-Nighthawk-X 4-D7800-device-tree.patch =================================================================== --- trunk/target/linux/ipq806x/patches-3.18/801-ARM-qcom-add-Netgear-Nighthawk-X 4-D7800-device-tree.patch (revision 0) +++ trunk/target/linux/ipq806x/patches-3.18/801-ARM-qcom-add-Netgear-Nighthawk-X 4-D7800-device-tree.patch (revision 0) @@ -0,0 +1,381 @@ +--- a/arch/arm/boot/dts/Makefile 2015-09-22 18:30:09.033530282 +0530 ++++ b/arch/arm/boot/dts/Makefile 2015-09-23 17:06:44.892947581 +0530 +@@ -362,6 +362,7 @@ + qcom-ipq8064-ap148.dtb \ + qcom-ipq8064-db149.dtb \ + qcom-ipq8064-r7500.dtb \ ++ qcom-ipq8064-d7800.dtb \ + qcom-msm8660-surf.dtb \ + qcom-msm8960-cdp.dtb \ + qcom-msm8974-sony-xperia-honami.dtb +--- a/arch/arm/boot/dts/qcom-ipq8064-d7800.dts 1970-01-01 05:30:00.000000000 +0530 ++++ b/arch/arm/boot/dts/qcom-ipq8064-d7800.dts 2015-09-23 17:06:45.336947567 +0530 +@@ -0,0 +1,368 @@ ++#include "qcom-ipq8064-v1.0.dtsi" ++ ++#include ++ ++/ { ++ model = "Netgear Nighthawk X4 D7800"; ++ compatible = "netgear,d7800", "qcom,ipq8064"; ++ ++ memory@0 { ++ reg = <0x42000000 0xe000000>; ++ device_type = "memory"; ++ }; ++ ++ reserved-memory { ++ #address-cells = <1>; ++ #size-cells = <1>; ++ ranges; ++ rsvd@41200000 { ++ reg = <0x41200000 0x300000>; ++ no-map; ++ }; ++ }; ++ ++ aliases { ++ serial0 = &uart4; ++ mdio-gpio0 = &mdio0; ++ }; ++ ++ chosen { ++ bootargs = "rootfstype=squashfs noinitrd"; ++ linux,stdout-path = "serial0:115200n8"; ++ }; ++ ++ soc { ++ pinmux@800000 { ++ i2c4_pins: i2c4_pinmux { ++ pins = "gpio12", "gpio13"; ++ function = "gsbi4"; ++ bias-disable; ++ }; ++ ++ pcie0_pins: pcie0_pinmux { ++ mux { ++ pins = "gpio3"; ++ function = "pcie1_rst"; ++ drive-strength = <12>; ++ bias-disable; ++ }; ++ }; ++ ++ pcie1_pins: pcie1_pinmux { ++ mux { ++ pins = "gpio48"; ++ function = "pcie2_rst"; ++ drive-strength = <12>; ++ bias-disable; ++ }; ++ }; ++ ++ nand_pins: nand_pins { ++ mux { ++ pins = "gpio34", "gpio35", "gpio36", ++ "gpio37", "gpio38", "gpio39", ++ "gpio40", "gpio41", "gpio42", ++ "gpio43", "gpio44", "gpio45", ++ "gpio46", "gpio47"; ++ function = "nand"; ++ drive-strength = <10>; ++ bias-disable; ++ }; ++ pullups { ++ pins = "gpio39"; ++ bias-pull-up; ++ }; ++ hold { ++ pins = "gpio40", "gpio41", "gpio42", ++ "gpio43", "gpio44", "gpio45", ++ "gpio46", "gpio47"; ++ bias-bus-hold; ++ }; ++ }; ++ ++ mdio0_pins: mdio0_pins { ++ mux { ++ pins = "gpio0", "gpio1"; ++ function = "gpio"; ++ drive-strength = <8>; ++ bias-disable; ++ }; ++ }; ++ ++ rgmii2_pins: rgmii2_pins { ++ mux { ++ pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32", ++ "gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62" ; ++ function = "rgmii2"; ++ drive-strength = <8>; ++ bias-disable; ++ }; ++ }; ++ }; ++ ++ gsbi@16300000 { ++ qcom,mode = ; ++ status = "ok"; ++ serial@16340000 { ++ status = "ok"; ++ }; ++ /* ++ * The i2c device on gsbi4 should not be enabled. ++ * On ipq806x designs gsbi4 i2c is meant for exclusive ++ * RPM usage. Turning this on in kernel manifests as ++ * i2c failure for the RPM. ++ */ ++ }; ++ ++ sata-phy@1b400000 { ++ status = "ok"; ++ }; ++ ++ sata@29000000 { ++ status = "ok"; ++ }; ++ ++ phy@100f8800 { /* USB3 port 1 HS phy */ ++ status = "ok"; ++ }; ++ ++ phy@100f8830 { /* USB3 port 1 SS phy */ ++ status = "ok"; ++ }; ++ ++ phy@110f8800 { /* USB3 port 0 HS phy */ ++ status = "ok"; ++ }; ++ ++ phy@110f8830 { /* USB3 port 0 SS phy */ ++ status = "ok"; ++ }; ++ ++ usb30@0 { ++ status = "ok"; ++ }; ++ ++ usb30@1 { ++ status = "ok"; ++ }; ++ ++ pcie0: pci@1b500000 { ++ status = "ok"; ++ reset-gpio = <&qcom_pinmux 3 0>; ++ pinctrl-0 = <&pcie0_pins>; ++ pinctrl-names = "default"; ++ }; ++ ++ pcie1: pci@1b700000 { ++ status = "ok"; ++ reset-gpio = <&qcom_pinmux 48 0>; ++ pinctrl-0 = <&pcie1_pins>; ++ pinctrl-names = "default"; ++ }; ++ ++ nand@1ac00000 { ++ status = "ok"; ++ ++ pinctrl-0 = <&nand_pins>; ++ pinctrl-names = "default"; ++ ++ nand-ecc-strength = <4>; ++ nand-bus-width = <8>; ++ ++ #address-cells = <1>; ++ #size-cells = <1>; ++ ++ qcadata@0 { ++ label = "qcadata"; ++ reg = <0x0000000 0x0c80000>; ++ read-only; ++ }; ++ ++ APPSBL@c80000 { ++ label = "APPSBL"; ++ reg = <0x0c80000 0x0500000>; ++ read-only; ++ }; ++ ++ APPSBLENV@1180000 { ++ label = "APPSBLENV"; ++ reg = <0x1180000 0x0080000>; ++ read-only; ++ }; ++ ++ art: art@1200000 { ++ label = "art"; ++ reg = <0x1200000 0x0140000>; ++ read-only; ++ }; ++ ++ artbak: art@1340000 { ++ label = "artbak"; ++ reg = <0x1340000 0x0140000>; ++ read-only; ++ }; ++ ++ kernel@1480000 { ++ label = "kernel"; ++ reg = <0x1480000 0x0200000>; ++ }; ++ ++ ubi@1680000 { ++ label = "ubi"; ++ reg = <0x1680000 0x1E00000>; ++ }; ++ ++ netgear@3480000 { ++ label = "netgear"; ++ reg = <0x3480000 0x4480000>; ++ read-only; ++ }; ++ ++ reserve@7900000 { ++ label = "reserve"; ++ reg = <0x7900000 0x0700000>; ++ read-only; ++ }; ++ ++ firmware@1480000 { ++ label = "firmware"; ++ reg = <0x1480000 0x2000000>; ++ }; ++ ++ }; ++ ++ mdio0: mdio { ++ compatible = "virtual,mdio-gpio"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ gpios = <&qcom_pinmux 1 0 &qcom_pinmux 0 0>; ++ pinctrl-0 = <&mdio0_pins>; ++ pinctrl-names = "default"; ++ ++ phy0: ethernet-phy@0 { ++ device_type = "ethernet-phy"; ++ reg = <0>; ++ qca,ar8327-initvals = < ++ 0x00004 0x7600000 /* PAD0_MODE */ ++ 0x00008 0x1000000 /* PAD5_MODE */ ++ 0x0000c 0x80 /* PAD6_MODE */ ++ 0x000e4 0xaa545 /* MAC_POWER_SEL */ ++ 0x000e0 0xc74164de /* SGMII_CTRL */ ++ 0x0007c 0x4e /* PORT0_STATUS */ ++ 0x00094 0x4e /* PORT6_STATUS */ ++ >; ++ }; ++ ++ phy4: ethernet-phy@4 { ++ device_type = "ethernet-phy"; ++ reg = <4>; ++ }; ++ }; ++ ++ gmac1: ethernet@37200000 { ++ status = "ok"; ++ phy-mode = "rgmii"; ++ phy-handle = <&phy4>; ++ qcom,id = <1>; ++ ++ pinctrl-0 = <&rgmii2_pins>; ++ pinctrl-names = "default"; ++ ++ mtd-mac-address = <&art 6>; ++ }; ++ ++ gmac2: ethernet@37400000 { ++ status = "ok"; ++ phy-mode = "sgmii"; ++ qcom,id = <2>; ++ ++ mtd-mac-address = <&art 0>; ++ ++ fixed-link { ++ speed = <1000>; ++ full-duplex; ++ }; ++ }; ++ }; ++ ++ gpio-keys { ++ compatible = "gpio-keys"; ++ ++ wifi { ++ label = "wifi"; ++ gpios = <&qcom_pinmux 6 1>; ++ linux,code = ; ++ }; ++ ++ reset { ++ label = "reset"; ++ gpios = <&qcom_pinmux 54 1>; ++ linux,code = ; ++ }; ++ ++ wps { ++ label = "wps"; ++ gpios = <&qcom_pinmux 65 1>; ++ linux,code = ; ++ }; ++ }; ++ ++ gpio-leds { ++ compatible = "gpio-leds"; ++ ++ usb1 { ++ label = "d7800:amber:usb1"; ++ gpios = <&qcom_pinmux 7 0>; ++ }; ++ ++ usb3 { ++ label = "d7800:amber:usb3"; ++ gpios = <&qcom_pinmux 8 0>; ++ }; ++ ++ status { ++ label = "d7800:amber:status"; ++ gpios = <&qcom_pinmux 9 0>; ++ }; ++ ++ internet { ++ label = "d7800:white:internet"; ++ gpios = <&qcom_pinmux 22 0>; ++ }; ++ ++ wan { ++ label = "d7800:white:wan"; ++ gpios = <&qcom_pinmux 23 0>; ++ }; ++ ++ wps { ++ label = "d7800:white:wps"; ++ gpios = <&qcom_pinmux 24 0>; ++ }; ++ ++ esata { ++ label = "d7800:white:esata"; ++ gpios = <&qcom_pinmux 26 0>; ++ }; ++ ++ power { ++ label = "d7800:white:power"; ++ gpios = <&qcom_pinmux 53 0>; ++ default-state = "on"; ++ }; ++ ++ rfkill { ++ label = "d7800:white:rfkill"; ++ gpios = <&qcom_pinmux 64 0>; ++ }; ++ ++ wifi5g { ++ label = "d7800:white:wifi5g"; ++ gpios = <&qcom_pinmux 67 0>; ++ }; ++ }; ++}; ++ ++&adm_dma { ++ status = "ok"; ++}; Regards, Tathagata -----Original Message----- From: John Crispin [mailto:blogic@openwrt.org] Sent: 23 December 2015 18:34 To: openwrt-devel@lists.openwrt.org; Tathagata Das Subject: Re: [OpenWrt-Devel] [Patch] ipq806x: add support for Netgear D7800 Hi, you sent the patch as an attachment. because of this patchwork did not pick it up. could you please resend with the patch inline rather than attached. John On 14/12/2015 10:37, Tathagata Das wrote: > Add support for the Netgear D7800 and build appropariate sysupgrade > and factory images. > > Known issues: > . USB ports are not working > . DSL is not added > > Signed-off-by: Tathagata Das > > > > _______________________________________________ > openwrt-devel mailing list > openwrt-devel@lists.openwrt.org > https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel > Index: trunk/target/linux/ipq806x/image/Makefile =================================================================== --- trunk/target/linux/ipq806x/image/Makefile (revision 47890) +++ trunk/target/linux/ipq806x/image/Makefile (working copy) @@ -121,6 +121,17 @@ BOARD_NAME := r7500 endef -TARGET_DEVICES += AP148 AP148-legacy DB149 R7500 +define Device/D7800 + $(call Device/DniImage) + DEVICE_DTS := qcom-ipq8064-d7800 + KERNEL_SIZE := 2097152 + NETGEAR_BOARD_ID := D7800 + NETGEAR_HW_ID := 29764958+0+128+512+4x4+4x4 + BLOCKSIZE := 128KiB + PAGESIZE := 2048 + BOARD_NAME := d7800 +endef +TARGET_DEVICES += AP148 AP148-legacy DB149 R7500 D7800 + $(eval $(call BuildImage)) Index: trunk/target/linux/ipq806x/profiles/netgear.mk =================================================================== --- trunk/target/linux/ipq806x/profiles/netgear.mk (revision 47890) +++ trunk/target/linux/ipq806x/profiles/netgear.mk (working copy) @@ -17,4 +17,18 @@ define Profile/R7500/Description Package set for the Netgear Nighthawk X4 R7500. endef + +define Profile/D7800 + NAME:=Netgear Nighthawk X4 D7800 + PACKAGES:= \ + kmod-usb-core kmod-usb-ohci kmod-usb2 kmod-ledtrig-usbdev \ + kmod-usb3 kmod-usb-dwc3-qcom kmod-usb-phy-qcom-dwc3 \ + kmod-ath10k wpad-mini ath10k-firmware-qca99x0 +endef + +define Profile/D7800/Description + Package set for the Netgear Nighthawk X4 D7800. +endef + $(eval $(call Profile,R7500)) +$(eval $(call Profile,D7800))