Show patches with: State = Action Required       |    Archived = No       |   198 patches
« 1 2 »
Patch Series A/F/R/T S/W/F Date Submitter Delegate State
[OpenWrt-Devel] procd-ujail on initramfs pivot_root fails [OpenWrt-Devel] procd-ujail on initramfs pivot_root fails - - - - 0 0 0 2019-10-18 Mehrtens, Hauke New
[OpenWrt-Devel] libpcap: build with cmake [OpenWrt-Devel] libpcap: build with cmake - - - - 0 0 0 2019-10-18 Yousong Zhou New
[OpenWrt-Devel,RFC] ath79: support for MikroTik wAP AC: vmlinux.elf + DTB file [OpenWrt-Devel,RFC] ath79: support for MikroTik wAP AC: vmlinux.elf + DTB file - - - - 0 0 0 2019-10-17 Roger Pueyo Centelles | Guifi.net New
[OpenWrt-Devel,v5,5/5] ath79: add support for Netgear WNR2200 ath79: add support for some Netgear WNR routers - - - - 0 0 0 2019-10-16 Michal Cieslakiewicz New
[OpenWrt-Devel,v5,4/5] ath79: add support for Netgear WNR1000 v2 ath79: add support for some Netgear WNR routers - - - - 0 0 0 2019-10-16 Michal Cieslakiewicz New
[OpenWrt-Devel,v5,3/5] ath79: add support for Netgear WNR2000 v3 ath79: add support for some Netgear WNR routers - - - - 0 0 0 2019-10-16 Michal Cieslakiewicz New
[OpenWrt-Devel,v5,2/5] ath79: WNR612v2: improve device support ath79: add support for some Netgear WNR routers - - - - 0 0 0 2019-10-16 Michal Cieslakiewicz New
[OpenWrt-Devel,v5,1/5] ath79: add LAN LEDs control bits for AR724x GPIO function pinmux ath79: add support for some Netgear WNR routers - - - - 0 0 0 2019-10-16 Michal Cieslakiewicz New
[OpenWrt-Devel] rb532: split up DEVICE_TITLE [OpenWrt-Devel] rb532: split up DEVICE_TITLE - - - - 0 0 0 2019-10-15 Moritz Warning New
[OpenWrt-Devel,v2] ath79: add support for Sitecom WLR-7100 [OpenWrt-Devel,v2] ath79: add support for Sitecom WLR-7100 - - - - 0 0 0 2019-10-15 Tomasz Maciej Nowak New
[OpenWrt-Devel,1/1] build: fix select uClibc [OpenWrt-Devel,1/1] build: fix select uClibc - - - - 0 0 0 2019-10-15 daxiong New
[OpenWrt-Devel,v2] ath79: fix patching ath9k MAC address for MyNet WiFi Range Extender [OpenWrt-Devel,v2] ath79: fix patching ath9k MAC address for MyNet WiFi Range Extender - - - - 0 0 0 2019-10-14 Adrian Schmutzler New
[OpenWrt-Devel,v3,2/2] lantiq: modify ath9k caldata extraction to reuse caldata.sh [OpenWrt-Devel,v3,1/2] treewide: use a single ath10k MAC patching function with checksum - - - - 0 0 0 2019-10-14 Adrian Schmutzler blocktrron Under Review
[OpenWrt-Devel] kmodloader: added -v and -a args to modeprobe [OpenWrt-Devel] kmodloader: added -v and -a args to modeprobe - - - - 0 0 0 2019-10-13 Gerard Ryan New
[OpenWrt-Devel,PATCH-19.07] uClibc++: Fix three bugs [OpenWrt-Devel,PATCH-19.07] uClibc++: Fix three bugs - - - - 0 0 0 2019-10-13 Rosen Penev New
[OpenWrt-Devel,19.07] mac80211: Update to version 4.19.79 [OpenWrt-Devel,19.07] mac80211: Update to version 4.19.79 - - - - 0 0 0 2019-10-12 Hauke Mehrtens Hauke New
[OpenWrt-Devel,2/2] mac80211: Update to version 5.4-rc2 Untitled series #135743 - - - - 0 0 0 2019-10-12 Hauke Mehrtens Hauke New
[OpenWrt-Devel,1/2] mac80211: Update to version 5.3.6 [OpenWrt-Devel,1/2] mac80211: Update to version 5.3.6 - - - - 0 0 0 2019-10-12 Hauke Mehrtens Hauke New
[OpenWrt-Devel,2/2] base-files: fix sysupgrade for Netgear WNDR4300 ath79: add support for Netgear WNDR4300 - - - - 0 0 0 2019-10-11 Michal Cieslakiewicz New
[OpenWrt-Devel,1/2] ath79: add support for Netgear WNDR4300 ath79: add support for Netgear WNDR4300 - - - - 0 0 0 2019-10-11 Michal Cieslakiewicz New
[OpenWrt-Devel] image: add magic number option for append-uImage-fakehdr [OpenWrt-Devel] image: add magic number option for append-uImage-fakehdr - - - - 0 0 0 2019-10-11 Michal Cieslakiewicz New
[OpenWrt-Devel] ath79: add AR934x NAND Flash Controller driver [OpenWrt-Devel] ath79: add AR934x NAND Flash Controller driver - - - - 0 0 0 2019-10-11 Michal Cieslakiewicz blocktrron Under Review
[OpenWrt-Devel,2/2] ar71xx: WNDR4300: fix WAN LED behaviour ar71xx: standarize Netgear WNDR4300 controls - - - - 0 0 0 2019-10-11 Michal Cieslakiewicz New
[OpenWrt-Devel,urngd,4/4] Tag version 1.0.1 sync with upstream, fixes and GitLab CI - - - - 0 0 0 2019-10-11 Petr Štetiar ynezz Under Review
[OpenWrt-Devel,urngd,3/4] jitterentropy-rngd: update to version v1.1.0 + clang compile fix sync with upstream, fixes and GitLab CI - - - - 0 0 0 2019-10-11 Petr Štetiar ynezz Under Review
[OpenWrt-Devel,urngd,2/4] Fix wrong types in format strings used in debug build sync with upstream, fixes and GitLab CI - - - - 0 0 0 2019-10-11 Petr Štetiar ynezz Under Review
[OpenWrt-Devel,urngd,1/4] Add initial GitLab CI support sync with upstream, fixes and GitLab CI - - - - 0 0 0 2019-10-11 Petr Štetiar ynezz Under Review
[OpenWrt-Devel,1/2] ar71xx: WNDR4300: use standard labels for buttons ar71xx: standarize Netgear WNDR4300 controls - - - - 0 0 0 2019-10-11 Michal Cieslakiewicz New
[OpenWrt-Devel,v2] fstools: add a hook before mounting the overlay [OpenWrt-Devel,v2] fstools: add a hook before mounting the overlay - - - - 0 0 0 2019-10-11 Alin Nastac New
[OpenWrt-Devel] proc: cancel script killing only if process ends [OpenWrt-Devel] proc: cancel script killing only if process ends - - - - 0 0 0 2019-10-10 SAn via openwrt-devel New
[OpenWrt-Devel,v2] ramips: add support for Asus RT-AC65P [OpenWrt-Devel,v2] ramips: add support for Asus RT-AC65P - - - - 0 0 0 2019-10-10 Gábor Varga New
[OpenWrt-Devel,v3] ramips: add support for JS76x8 series DEV boards [OpenWrt-Devel,v3] ramips: add support for JS76x8 series DEV boards - - - - 0 0 0 2019-10-10 Robinson Wu New
[OpenWrt-Devel,v2] ramips: add support for JS76x8 series DEV boards [OpenWrt-Devel,v2] ramips: add support for JS76x8 series DEV boards - - - - 0 0 0 2019-10-10 Robinson Wu New
[OpenWrt-Devel] ramips: add support for JS76x8 series development boards [OpenWrt-Devel] ramips: add support for JS76x8 series development boards - - - - 0 0 0 2019-10-09 Robinson Wu New
[OpenWrt-Devel] toolchain: Simplify libc selection [OpenWrt-Devel] toolchain: Simplify libc selection - - - - 0 0 0 2019-10-08 Rosen Penev New
[OpenWrt-Devel,v4,3/3] ramips: add support for ZTK7628P development board [OpenWrt-Devel,v4,1/3] ramips: add support for JS7628 development board - - - - 0 0 0 2019-10-08 Robinson Wu New
[OpenWrt-Devel,v4,2/3] ramips: add support for JS7688 development board [OpenWrt-Devel,v4,1/3] ramips: add support for JS7628 development board - - - - 0 0 0 2019-10-08 Robinson Wu New
[OpenWrt-Devel,v4,1/3] ramips: add support for JS7628 development board [OpenWrt-Devel,v4,1/3] ramips: add support for JS7628 development board - - - - 0 0 0 2019-10-08 Robinson Wu New
[OpenWrt-Devel,8/8] tools/mtd-utils: add cygwin compatibility [OpenWrt-Devel,1/8] ncurses: add cygwin compatibility - - - - 0 0 0 2019-10-08 Rosen Penev ynezz Under Review
[OpenWrt-Devel,7/8] tools/findutils: improve cygwin compatibility [OpenWrt-Devel,1/8] ncurses: add cygwin compatibility - - - - 0 0 0 2019-10-08 Rosen Penev ynezz Under Review
[OpenWrt-Devel,6/8] tools/firmware-utils: add cygwin compatibility [OpenWrt-Devel,1/8] ncurses: add cygwin compatibility - - - - 0 0 0 2019-10-08 Rosen Penev ynezz Under Review
[OpenWrt-Devel,5/8] tools/zlib: add cygwin compatibility [OpenWrt-Devel,1/8] ncurses: add cygwin compatibility - - - - 0 0 0 2019-10-08 Rosen Penev ynezz Under Review
[OpenWrt-Devel,4/8] tools/coreutils: add cygwin compatibility [OpenWrt-Devel,1/8] ncurses: add cygwin compatibility - - - - 0 0 0 2019-10-08 Rosen Penev ynezz Under Review
[OpenWrt-Devel,3/8] tools/dosfstools: Replace iconv patch with upstream submission [OpenWrt-Devel,1/8] ncurses: add cygwin compatibility - - - - 0 0 0 2019-10-08 Rosen Penev ynezz Under Review
[OpenWrt-Devel,2/8] scripts/patch-specs: add cygwin compatibility [OpenWrt-Devel,1/8] ncurses: add cygwin compatibility - - - - 0 0 0 2019-10-08 Rosen Penev ynezz Under Review
[OpenWrt-Devel,1/8] ncurses: add cygwin compatibility [OpenWrt-Devel,1/8] ncurses: add cygwin compatibility - - - - 0 0 0 2019-10-08 Rosen Penev ynezz Under Review
[OpenWrt-Devel] ipq40xx: add label MAC address for Netgear EX6150v2 [OpenWrt-Devel] ipq40xx: add label MAC address for Netgear EX6150v2 - - - - 0 0 0 2019-10-07 Adrian Schmutzler blocktrron New
[OpenWrt-Devel] ath79: fix SUPPORTED_DEVICES for ubnt_nanostation-m [OpenWrt-Devel] ath79: fix SUPPORTED_DEVICES for ubnt_nanostation-m - - - - 0 0 0 2019-10-04 Adrian Schmutzler New
[OpenWrt-Devel,19.07] ath79: add SUPPORTED_DEVICES to ubnt_nanostation-m-xw [OpenWrt-Devel,19.07] ath79: add SUPPORTED_DEVICES to ubnt_nanostation-m-xw - - - - 0 0 0 2019-10-04 Adrian Schmutzler New
[OpenWrt-Devel] procd sysupgrade: close input side of pipe before reading [OpenWrt-Devel] procd sysupgrade: close input side of pipe before reading - - - - 0 0 0 2019-10-03 Dustin Lundquist New
[OpenWrt-Devel] uboot-envtools: remove erasesize from MMC config [OpenWrt-Devel] uboot-envtools: remove erasesize from MMC config - - - - 0 0 0 2019-10-02 Tim Harvey xback Under Review
[OpenWrt-Devel,2/2] imx6: bootscript: use partition UUID for rootfs if possible [OpenWrt-Devel,1/2] imx6: bootscript: enable UBI fastmap support - - - - 0 0 0 2019-10-02 Tim Harvey xback Under Review
[OpenWrt-Devel,1/2] imx6: bootscript: enable UBI fastmap support [OpenWrt-Devel,1/2] imx6: bootscript: enable UBI fastmap support - - - - 0 0 0 2019-10-02 Tim Harvey xback Under Review
[OpenWrt-Devel] ath79: Clean up GL-AR300M DTS/DTSI inclusions [OpenWrt-Devel] ath79: Clean up GL-AR300M DTS/DTSI inclusions - - 1 - 0 0 0 2019-10-02 Jeff Kletsky New
[OpenWrt-Devel] openssl: Add engine configuration to openssl.cnf [OpenWrt-Devel] openssl: Add engine configuration to openssl.cnf - - - - 0 0 0 2019-10-01 Eneas U de Queiroz New
[OpenWrt-Devel] ipq40xx: essedma: Fix dead lock [OpenWrt-Devel] ipq40xx: essedma: Fix dead lock - - - - 0 0 0 2019-10-01 Masafumi UTSUGI New
[OpenWrt-Devel,19.07] ar71xx: fix sysupgrade to ath79 for wndr3700v2 and wndr3800 [OpenWrt-Devel,19.07] ar71xx: fix sysupgrade to ath79 for wndr3700v2 and wndr3800 - - - - 0 0 0 2019-09-30 Petr Štetiar ynezz Under Review
[OpenWrt-Devel] build: call Host/Uninstall before wiping the host build dir [OpenWrt-Devel] build: call Host/Uninstall before wiping the host build dir - - - - 0 0 0 2019-09-28 Andre Heider New
[OpenWrt-Devel,luci] luci-mod-system: check for sysupgrade with backup possibility [OpenWrt-Devel,luci] luci-mod-system: check for sysupgrade with backup possibility - - - - 0 0 0 2019-09-25 Rafał Miłecki New
[OpenWrt-Devel,2/2] build: add script to sign packages [OpenWrt-Devel,1/2] build: separate signing logic - - - - 0 0 0 2019-09-24 Paul Spooren New
[OpenWrt-Devel,1/2] build: separate signing logic [OpenWrt-Devel,1/2] build: separate signing logic - - - - 0 0 0 2019-09-24 Paul Spooren New
[OpenWrt-Devel] buildbot: store key-build.pub as 0644 [OpenWrt-Devel] buildbot: store key-build.pub as 0644 - - - - 0 0 0 2019-09-24 Paul Spooren New
[OpenWrt-Devel] ramips: add support for Asus RT-AC65P [OpenWrt-Devel] ramips: add support for Asus RT-AC65P - - - - 0 0 0 2019-09-24 Gábor Varga New
[OpenWrt-Devel,v2,2/2] ramips: Add support for ZBT WE1026-H Add support for the ZBT WE1026-H - - - - 0 0 0 2019-09-24 Kristian Evensen New
[OpenWrt-Devel,v2,1/2] ramips: Update ZBT WE1026 DTS-files Add support for the ZBT WE1026-H 5 - - - 0 0 0 2019-09-24 Kristian Evensen New
[OpenWrt-Devel] Add support for Inventel DV4210 [OpenWrt-Devel] Add support for Inventel DV4210 - - - - 0 0 0 2019-09-22 Daniel Gonzalez Cabanelas New
[OpenWrt-Devel,v2,2/2] ramips: fix whitespace issues in DTS files [OpenWrt-Devel,v2,1/2] ramips/mt762x: convert devices to interrupt-driven gpio-keys - - - - 0 0 0 2019-09-20 Adrian Schmutzler New
[OpenWrt-Devel,v2,1/2] ramips/mt762x: convert devices to interrupt-driven gpio-keys [OpenWrt-Devel,v2,1/2] ramips/mt762x: convert devices to interrupt-driven gpio-keys - - - - 0 0 0 2019-09-20 Adrian Schmutzler New
[OpenWrt-Devel,ustream-ssl] Update example certificate & key, fix typo [OpenWrt-Devel,ustream-ssl] Update example certificate & key, fix typo - - - - 0 0 0 2019-09-19 Eneas U de Queiroz New
[OpenWrt-Devel,ustream-ssl,v2,3/3] wolfssl: enable CN validation [OpenWrt-Devel,ustream-ssl,1/2] ustream-io-cyassl.c: fix client-mode connections - - - - 0 0 0 2019-09-19 Eneas U de Queiroz New
[OpenWrt-Devel,ustream-ssl,v2,2/3] ustream-io-cyassl.c: fix client-mode connections Untitled series #131438 - - - - 0 0 0 2019-09-19 Eneas U de Queiroz New
[OpenWrt-Devel,ustream-ssl,v2,1/3] Remove CyaSSL, WolfSSL < 3.10.4 support [OpenWrt-Devel,ustream-ssl,v2,1/3] Remove CyaSSL, WolfSSL < 3.10.4 support - - - - 0 0 0 2019-09-19 Eneas U de Queiroz New
[OpenWrt-Devel,v2,2/2] ath79: add LED migration for several Archer Cxx devices [OpenWrt-Devel,v2,1/2] ath79: use board name in LED migrations - - - - 0 0 0 2019-09-17 Adrian Schmutzler New
[OpenWrt-Devel,v2,1/2] ath79: use board name in LED migrations [OpenWrt-Devel,v2,1/2] ath79: use board name in LED migrations - - - - 0 0 0 2019-09-17 Adrian Schmutzler New
[OpenWrt-Devel,2/3] ramips: fix whitespace issues in DTS files [OpenWrt-Devel,1/3] ramips/mt762x: convert devices to interrupt-driven gpio-keys - - - - 0 0 0 2019-09-17 Adrian Schmutzler blocktrron Under Review
[OpenWrt-Devel,1/3] ramips/mt762x: convert devices to interrupt-driven gpio-keys [OpenWrt-Devel,1/3] ramips/mt762x: convert devices to interrupt-driven gpio-keys - - - 1 0 0 0 2019-09-17 Adrian Schmutzler ynezz Under Review
[OpenWrt-Devel,v3] brcm63xx: R5010UNv2: fix flash partitions for 16MB flash [OpenWrt-Devel,v3] brcm63xx: R5010UNv2: fix flash partitions for 16MB flash - 1 - - 0 0 0 2019-09-14 Daniel Gonzalez Cabanelas New
[OpenWrt-Devel] libubox, jshn: add option to write output to a file [OpenWrt-Devel] libubox, jshn: add option to write output to a file - - - - 0 0 0 2019-09-13 Roman Yeryomin New
[OpenWrt-Devel] ath79: base-files: disable sysupgrade for routerstations and ja76pf2 [OpenWrt-Devel] ath79: base-files: disable sysupgrade for routerstations and ja76pf2 - - - - 0 0 0 2019-09-06 Tomasz Maciej Nowak New
[OpenWrt-Devel] Migration in ath79 for swapped ethernet [OpenWrt-Devel] Migration in ath79 for swapped ethernet - - - - 0 0 0 2019-09-05 Adrian Schmutzler New
[OpenWrt-Devel,3/3] ath79: apply alphabetical sorting to entries in 10_fix_wifi_mac [OpenWrt-Devel,1/3] ath79: fix whitespaces in 10_fix_wifi_mac - - - - 0 0 0 2019-09-05 Adrian Schmutzler New
[OpenWrt-Devel,2/3] ath79: remove empty default case in 10_fix_wifi_mac [OpenWrt-Devel,1/3] ath79: fix whitespaces in 10_fix_wifi_mac - - - - 0 0 0 2019-09-05 Adrian Schmutzler New
[OpenWrt-Devel,1/3] ath79: fix whitespaces in 10_fix_wifi_mac [OpenWrt-Devel,1/3] ath79: fix whitespaces in 10_fix_wifi_mac - - - - 0 0 0 2019-09-05 Adrian Schmutzler New
[OpenWrt-Devel] procd: allow running with pid != 1 [OpenWrt-Devel] procd: allow running with pid != 1 - - - - 0 0 0 2019-09-03 Paul Spooren New
[OpenWrt-Devel,v2] ipq40xx: Add support for Unielec U4019 [OpenWrt-Devel,v2] ipq40xx: Add support for Unielec U4019 - - - - 0 0 0 2019-08-31 Kristian Evensen New
[OpenWrt-Devel,RFC] firewall3: zones: Use ipsets instead of interfaces in zone rules [OpenWrt-Devel,RFC] firewall3: zones: Use ipsets instead of interfaces in zone rules - - - - 0 0 0 2019-08-28 Kristian Evensen New
[OpenWrt-Devel,v3] ramips: add support for Xiaomi Mi Wi-Fi Router 3G v2 [OpenWrt-Devel,v3] ramips: add support for Xiaomi Mi Wi-Fi Router 3G v2 - - - - 0 0 0 2019-08-28 Paul Fertser New
[OpenWrt-Devel] uqmi: separate into libuqmi library and uqmi util itself [OpenWrt-Devel] uqmi: separate into libuqmi library and uqmi util itself - - - - 0 0 0 2019-08-23 Denis Kalashnikov New
[OpenWrt-Devel] treewide: add Generic subtarget if missing [OpenWrt-Devel] treewide: add Generic subtarget if missing - - - - 0 0 0 2019-08-23 Paul Spooren New
[OpenWrt-Devel,v2] lantiq: use gpio_hog instead of gpio-export [OpenWrt-Devel,v2] lantiq: use gpio_hog instead of gpio-export - - - - 0 0 0 2019-08-19 Birger Koblitz New
[OpenWrt-Devel,PATCHv2] mdadm: revised mdadm config & init logic [OpenWrt-Devel,PATCHv2] mdadm: revised mdadm config & init logic - - - - 0 0 0 2019-08-17 Rosen Penev New
[OpenWrt-Devel] ramips: remove RAM size from device name for UniElec devices [OpenWrt-Devel] ramips: remove RAM size from device name for UniElec devices - - - - 0 0 0 2019-08-16 Adrian Schmutzler New
[OpenWrt-Devel] ar71xx: ag71xx: add missing register writes [OpenWrt-Devel] ar71xx: ag71xx: add missing register writes - - - - 0 0 0 2019-08-16 Koen Vandeputte xback Under Review
[OpenWrt-Devel,v4,5/5] ath79: add support for Netgear WNR2200 ath79: add support for some Netgear WNR routers - - - - 0 0 0 2019-08-13 Michal Cieslakiewicz New
[OpenWrt-Devel,v4,4/5] ath79: add support for Netgear WNR1000 v2 ath79: add support for some Netgear WNR routers - - - - 0 0 0 2019-08-13 Michal Cieslakiewicz New
[OpenWrt-Devel,v4,3/5] ath79: add support for Netgear WNR2000 v3 ath79: add support for some Netgear WNR routers - - - - 0 0 0 2019-08-13 Michal Cieslakiewicz New
[OpenWrt-Devel,v4,2/5] ath79: WNR612v2: improve device support ath79: add support for some Netgear WNR routers - - - - 0 0 0 2019-08-13 Michal Cieslakiewicz New
[OpenWrt-Devel,v4,1/5] ath79: add LAN LEDs control bits for AR724x GPIO function pinmux ath79: add support for some Netgear WNR routers - - - - 0 0 0 2019-08-13 Michal Cieslakiewicz New
[OpenWrt-Devel,v2,3/3] ramips: add support to ZTK7628P development board [OpenWrt-Devel,v3,1/3] ramips: add support to JS7628 development board - - - - 0 0 0 2019-08-08 Robinson Wu New
[OpenWrt-Devel,v2,2/3] ramips: add support to JS7688 development board [OpenWrt-Devel,v3,1/3] ramips: add support to JS7628 development board - - - - 0 0 0 2019-08-08 Robinson Wu New
« 1 2 »