diff mbox series

[ovs-dev,v4,1/2] ovs-ctl: Add delete-transient-ports command

Message ID 4115e5eb3d22f44367dc768f191b2bf057875915.1504871394.git.tredaelli@redhat.com
State Accepted
Headers show
Series Add system service to delete transient ports on boot. | expand

Commit Message

Timothy Redaelli Sept. 13, 2017, 7:35 a.m. UTC 
Add a command to delete all ports that have the other_config:transient value
set to true.

Acked-by: Aaron Conole <aconole@redhat.com>
Signed-off-by: Timothy Redaelli <tredaelli@redhat.com>
---
 utilities/ovs-ctl.8  |  6 ++++++
 utilities/ovs-ctl.in | 24 ++++++++++++++----------
 2 files changed, 20 insertions(+), 10 deletions(-)
diff mbox series

Patch

diff --git a/utilities/ovs-ctl.8 b/utilities/ovs-ctl.8
index 84fa33fff..e25223c78 100644
--- a/utilities/ovs-ctl.8
+++ b/utilities/ovs-ctl.8
@@ -44,6 +44,8 @@  ovs\-ctl \- OVS startup helper script
 [\fB\-\-dport=\fIdport\fR]
 \fBenable\-protocol\fR
 .br
+\fBovs\-ctl delete\-transient\-ports
+.br
 \fBovs\-ctl help \fR| \fB\-h \fR| \fB\-\-help
 .br
 \fBovs\-ctl \-\-version
@@ -412,6 +414,10 @@  TCP or UDP source or destination port to match.  These are optional
 and allowed only with \fB\-\-protocol=tcp\fR or
 \fB\-\-protocol=udp\fR.
 .
+.SH "The ``delete\-transient\-ports'' command"
+.
+Deletes all ports that have the \fBother_config:transient\fR value set to true.
+.
 .SH "The ``help'' command"
 .
 Prints a usage message and exits successfully.
diff --git a/utilities/ovs-ctl.in b/utilities/ovs-ctl.in
index dc1d02c9c..ff39874e0 100755
--- a/utilities/ovs-ctl.in
+++ b/utilities/ovs-ctl.in
@@ -553,16 +553,17 @@  This program is intended to be invoked internally by Open vSwitch startup
 scripts.  System administrators should not normally invoke it directly.
 
 Commands:
-  start              start Open vSwitch daemons
-  stop               stop Open vSwitch daemons
-  restart            stop and start Open vSwitch daemons
-  status             check whether Open vSwitch daemons are running
-  version            print versions of Open vSwitch daemons
-  load-kmod          insert modules if not already present
-  force-reload-kmod  save OVS network device state, stop OVS, unload kernel
-                     module, reload kernel module, start OVS, restore state
-  enable-protocol    enable protocol specified in options with iptables
-  help               display this help message
+  start                   start Open vSwitch daemons
+  stop                    stop Open vSwitch daemons
+  restart                 stop and start Open vSwitch daemons
+  status                  check whether Open vSwitch daemons are running
+  version                 print versions of Open vSwitch daemons
+  load-kmod               insert modules if not already present
+  force-reload-kmod       save OVS network device state, stop OVS, unload kernel
+                          module, reload kernel module, start OVS, restore state
+  enable-protocol         enable protocol specified in options with iptables
+  delete-transient-ports  delete transient (other_config:transient=true) ports
+  help                    display this help message
 
 One of the following options is required for "start", "restart" and "force-reload-kmod":
   --system-id=UUID   set specific ID to uniquely identify this system
@@ -725,6 +726,9 @@  case $command in
     enable-protocol)
         enable_protocol
         ;;
+    delete-transient-ports)
+        del_transient_ports
+        ;;
     help)
         usage
         ;;