@@ -42,6 +42,9 @@ if [ "$M32" ]; then
sudo apt-get install -y $pkgs
fi
+# Install python test dependencies
+pip install -r python/test_requirements.txt
+
# IPv6 is supported by kernel but disabled in TravisCI images:
# https://github.com/travis-ci/travis-ci/issues/8891
# Enable it to avoid skipping of IPv6 related tests.
@@ -181,6 +181,10 @@ following to obtain better warnings:
come from the "hacking" flake8 plugin. If it's not installed, the warnings
just won't occur until it's run on a system with "hacking" installed.
+- the python packages listed in "python/test_requirements.txt" (compatible
+ with pip). If they are installed, the pytest-based Python unit tests will
+ be run.
+
You may find the ovs-dev script found in ``utilities/ovs-dev.py`` useful.
.. _general-install-reqs:
@@ -52,6 +52,9 @@ ovs_pyfiles = \
python/ovs/vlog.py \
python/ovs/winutils.py
+ovs_pytests = \
+ python/ovs/tests/test_kv.py
+
# These python files are used at build time but not runtime,
# so they are not installed.
EXTRA_DIST += \
@@ -64,12 +67,14 @@ EXTRA_DIST += \
EXTRA_DIST += \
python/ovs/compat/sortedcontainers/LICENSE \
python/README.rst \
- python/setup.py
+ python/setup.py \
+ python/test_requirements.txt
# C extension support.
EXTRA_DIST += python/ovs/_json.c
-PYFILES = $(ovs_pyfiles) python/ovs/dirs.py $(ovstest_pyfiles)
+PYFILES = $(ovs_pyfiles) python/ovs/dirs.py $(ovstest_pyfiles) $(ovs_pytests)
+
EXTRA_DIST += $(PYFILES)
PYCOV_CLEAN_FILES += $(PYFILES:.py=.py,cover)
new file mode 100644
@@ -0,0 +1,76 @@
+import pytest
+
+from ovs.flow.kv import KVParser, KeyValue
+
+
+@pytest.mark.parametrize(
+ "input_data,expected",
+ [
+ (
+ (
+ "cookie=0x0, duration=147566.365s, table=0, n_packets=39, n_bytes=2574, idle_age=65534, hard_age=65534", # noqa: E501
+ None,
+ ),
+ [
+ KeyValue("cookie", 0),
+ KeyValue("duration", "147566.365s"),
+ KeyValue("table", 0),
+ KeyValue("n_packets", 39),
+ KeyValue("n_bytes", 2574),
+ KeyValue("idle_age", 65534),
+ KeyValue("hard_age", 65534),
+ ],
+ ),
+ (
+ (
+ "load:0x4->NXM_NX_REG13[],load:0x9->NXM_NX_REG11[],load:0x8->NXM_NX_REG12[],load:0x1->OXM_OF_METADATA[],load:0x1->NXM_NX_REG14[],mod_dl_src:0a:58:a9:fe:00:02,resubmit(,8)", # noqa: E501
+ None,
+ ),
+ [
+ KeyValue("load", "0x4->NXM_NX_REG13[]"),
+ KeyValue("load", "0x9->NXM_NX_REG11[]"),
+ KeyValue("load", "0x8->NXM_NX_REG12[]"),
+ KeyValue("load", "0x1->OXM_OF_METADATA[]"),
+ KeyValue("load", "0x1->NXM_NX_REG14[]"),
+ KeyValue("mod_dl_src", "0a:58:a9:fe:00:02"),
+ KeyValue("resubmit", ",8"),
+ ],
+ ),
+ (
+ ("l1(l2(l3(l4())))", None),
+ [KeyValue("l1", "l2(l3(l4()))")]
+ ),
+ (
+ ("l1(l2(l3(l4()))),foo:bar", None),
+ [KeyValue("l1", "l2(l3(l4()))"), KeyValue("foo", "bar")],
+ ),
+ (
+ ("enqueue:1:2,output=2", None),
+ [KeyValue("enqueue", "1:2"), KeyValue("output", 2)],
+ ),
+ (
+ ("value_to_reg(100)->someReg[10],foo:bar", None),
+ [
+ KeyValue("value_to_reg", "(100)->someReg[10]"),
+ KeyValue("foo", "bar"),
+ ],
+ ),
+ ],
+)
+def test_kv_parser(input_data, expected):
+ input_string = input_data[0]
+ decoders = input_data[1]
+ tparser = KVParser(input_string, decoders)
+ tparser.parse()
+ result = tparser.kv()
+ assert len(expected) == len(result)
+ for i in range(0, len(result)):
+ assert result[i].key == expected[i].key
+ assert result[i].value == expected[i].value
+ kpos = result[i].meta.kpos
+ kstr = result[i].meta.kstring
+ vpos = result[i].meta.vpos
+ vstr = result[i].meta.vstring
+ assert input_string[kpos : kpos + len(kstr)] == kstr
+ if vpos != -1:
+ assert input_string[vpos : vpos + len(vstr)] == vstr
new file mode 100644
@@ -0,0 +1,3 @@
+pytest
+netaddr
+pyparsing
@@ -238,3 +238,23 @@ export ASAN_OPTIONS
# for the build.
UBSAN_OPTIONS=print_stacktrace=1:halt_on_error=true:log_path=ubsan:$UBSAN_OPTIONS
export UBSAN_OPTIONS
+
+# Check whether Python test requirements are available.
+REQUIREMENT_PATH=$abs_top_srcdir/python/test_requirements.txt $PYTHON3 -c '
+import os
+import pathlib
+import pkg_resources
+import sys
+
+with pathlib.Path(os.path.join(os.getenv("REQUIREMENT_PATH"))).open() as reqs:
+ for req in pkg_resources.parse_requirements(reqs):
+ try:
+ pkg_resources.require(str(req))
+ except pkg_resources.DistributionNotFound:
+ sys.exit(2)
+'
+case $? in
+ 0) HAVE_PYTEST=yes ;;
+ 2) HAVE_PYTEST=no ;;
+ *) echo "$0: unexpected error probing Python unit test requirements" >&2 ;;
+esac
@@ -102,6 +102,7 @@ TESTSUITE_AT = \
tests/ovsdb-rbac.at \
tests/ovs-vsctl.at \
tests/ovs-xapi-sync.at \
+ tests/pytest.at \
tests/stp.at \
tests/rstp.at \
tests/interface-reconfigure.at \
new file mode 100644
@@ -0,0 +1,8 @@
+AT_BANNER([Python unit tests])
+
+# Run pytest unit tests.
+AT_SETUP([Pytest unit tests - Python3])
+AT_KEYWORDS([python])
+AT_SKIP_IF([test "$HAVE_PYTEST" = "no"])
+AT_CHECK([$PYTHON3 -m pytest $top_srcdir/python/ovs],[0], [ignore], [ignore])
+AT_CLEANUP()
@@ -78,3 +78,4 @@ m4_include([tests/mcast-snooping.at])
m4_include([tests/packet-type-aware.at])
m4_include([tests/nsh.at])
m4_include([tests/drop-stats.at])
+m4_include([tests/pytest.at])
Use pytest to run unit tests as part of the standard testsuite. Signed-off-by: Adrian Moreno <amorenoz@redhat.com> --- .ci/linux-prepare.sh | 3 + Documentation/intro/install/general.rst | 4 ++ python/automake.mk | 9 ++- python/ovs/tests/test_kv.py | 76 +++++++++++++++++++++++++ python/test_requirements.txt | 3 + tests/atlocal.in | 20 +++++++ tests/automake.mk | 1 + tests/pytest.at | 8 +++ tests/testsuite.at | 1 + 9 files changed, 123 insertions(+), 2 deletions(-) create mode 100644 python/ovs/tests/test_kv.py create mode 100644 python/test_requirements.txt create mode 100644 tests/pytest.at