@@ -28,6 +28,7 @@ DOC_SOURCE = \
Documentation/tutorials/ovn-openstack.rst \
Documentation/tutorials/ovn-sandbox.rst \
Documentation/tutorials/ovs-conntrack.rst \
+ Documentation/tutorials/ipsec.rst \
Documentation/topics/index.rst \
Documentation/topics/bonding.rst \
Documentation/topics/idl-compound-indexes.rst \
@@ -60,6 +61,7 @@ DOC_SOURCE = \
Documentation/howto/docker.rst \
Documentation/howto/dpdk.rst \
Documentation/howto/firewalld.rst \
+ Documentation/howto/ipsec.rst \
Documentation/howto/kvm.rst \
Documentation/howto/libvirt.rst \
Documentation/howto/selinux.rst \
@@ -37,6 +37,7 @@ OVS
:maxdepth: 2
kvm
+ ipsec
selinux
libvirt
ssl
new file mode 100644
@@ -0,0 +1,193 @@
+..
+ Licensed under the Apache License, Version 2.0 (the "License"); you may
+ not use this file except in compliance with the License. You may obtain
+ a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+ WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
+ License for the specific language governing permissions and limitations
+ under the License.
+
+ Convention for heading levels in Open vSwitch documentation:
+
+ ======= Heading 0 (reserved for the title in a document)
+ ------- Heading 1
+ ~~~~~~~ Heading 2
+ +++++++ Heading 3
+ ''''''' Heading 4
+
+ Avoid deeper levels because they do not render well.
+
+=======================================
+Encrypt Open vSwitch Tunnels with IPsec
+=======================================
+
+This document gives detailed description on the OVS IPsec tunnel and its
+configuration modes. If you want to follow a step-by-step guide to run and
+test IPsec tunnel, please refer to :doc:`/tutorials/ipsec`.
+
+Overview
+--------
+
+Why do encryption?
+~~~~~~~~~~~~~~~~~~
+
+OVS tunnel packets are transported from one machine to another. Along the path,
+the packets are processed by physical routers and physical switches. There are
+risks that these physical devices might read or write the contents of the
+tunnel packets. IPsec encrypts IP payload and prevents the malicious party
+sniffing or manipulating the tunnel traffic.
+
+OVS IPsec
+~~~~~~~~~
+
+OVS IPsec aims to provide a simple interface for user to add encryption on OVS
+tunnels. It supports GRE, GENEVE, VXLAN, and STT tunnel. The IPsec
+configuration is done by setting options of the tunnel interface and
+other_config of Open_vSwitch. You can choose different authentication methods
+and fowarding modes based on your system requirement.
+
+Configuration
+-------------
+
+Authentication Methods
+~~~~~~~~~~~~~~~~~~~~~~
+
+Hosts of the IPsec tunnel need to authenticate each other to build a secure
+channel. There are three authentication methods:
+
+1) You can use pre-shared key (PSK) to do authentication. In both hosts, set
+ the same PSK value. This PSK is like your password. You should never reveal
+ it to untrusted parties. This method is easier to use but less secure than
+ the certificate-based methods::
+
+ $ ovs-vsctl add-port br0 ipsec_gre0 -- \
+ set interface ipsec_gre0 type=gre \
+ options:local_ip=1.1.1.1 \
+ options:remote_ip=2.2.2.2 \
+ options:psk=swordfish
+
+ .. note::
+
+ The local_ip field is required for the IPsec tunnel.
+
+2) You can use self-signed certificate to do authentication. In each host,
+ generate a certificate and the paired private key. Copy the certificate of
+ the remote host to the local host and configure the OVS as following::
+
+ $ ovs-vsctl set Open_vSwitch . \
+ other_config:certificate=/path/to/local_cert.pem \
+ other_config:private_key=/path/to/priv_key.pem
+ $ ovs-vsctl add-port br0 ipsec_gre0 -- \
+ set interface ipsec_gre0 type=gre \
+ options:local_ip=1.1.1.1 \
+ options:remote_ip=2.2.2.2 \
+ options:remote_cert=/path/to/remote_cert.pem
+
+ `local_cert.pem` is the certificate of the local host. `priv_key.pem`
+ is the private key of the local host. `priv_key.pem` needs to be stored in
+ a secure location. `remote_cert.pem` is the certificate of the remote host.
+
+ .. note::
+
+ OVS IPsec requires x.509 version 3 certificate with the subjectAltName
+ DNS field setting the same string as the common name (CN) field. You can
+ follow the tutorial in :doc:`/tutorials/ipsec` and use ovs-pki(8) to
+ generate compatible certificate and key.
+
+3) You can also use CA-signed certificate to do authentication. First, you need
+ to create a CA certificate and sign each host certificate with the CA key
+ (please see :doc:`/tutorials/ipsec`). Copy the CA certificate to each
+ host and configure the OVS as following::
+
+ $ ovs-vsctl set Open_vSwitch . \
+ other_config:certificate=/path/to/local_cert.pem \
+ other_config:private_key=/path/to/priv_key.pem \
+ other_config:ca_cert=/path/to/ca_cert.pem
+ $ ovs-vsctl add-port br0 ipsec_gre0 -- \
+ set interface ipsec_gre0 type=gre \
+ options:local_ip=1.1.1.1 \
+ options:remote_ip=2.2.2.2 \
+ options:remote_name=remote_cn
+
+ `ca_cert.pem` is the CA certificate. You need to set `remote_cn` as the
+ common name (CN) of the remote host's certificate so that only the
+ certificate with the expected CN can be trusted in this connection. It is
+ preferable to use this method than 2) if there are many remote hosts since
+ you don't have to copy every remote certificate to the local host.
+
+ .. note::
+
+ When using certificate-based authentication, you should not set psk in
+ the interface options. When using psk-based authentication, you should
+ not set certificate, private_key, ca_cert, remote_cert, and remote_name.
+
+Forwarding Modes
+~~~~~~~~~~~~~~~~
+
+There is delay between the user setting up IPsec tunnel and the IPsec tunnel
+actually taking affect to encrypt packets. To offset the risk of unencrypted
+packets leaking out during this period, you can choose a more secure forwarding
+mode. There are three forwarding modes:
+
+1) The default mode allows unencrypted packets being sent out before IPsec
+ taking effect::
+
+ $ ovs-vsctl add-port br0 ipsec_gre0 -- \
+ set interface ipsec_gre0 type=gre \
+ options:local_ip=1.1.1.1 \
+ options:remote_ip=2.2.2.2 \
+ options:psk=swordfish
+
+ This mode should be used only and only if tunnel configuration is static
+ and/or if there is firewall that can drop the plain packets that
+ occasionally leak the tunnel unencrypted on OVSDB (re)configuration events.
+
+2) The ipsec_skb_mark mode filters unencrypted packets by using skb mark of
+ tunnel packets::
+
+ $ ovs-vsctl set Open_vSwitch . other_config:ipsec_skb_mark=0/1
+ $ ovs-vsctl add-port br0 ipsec_gre0 -- \
+ set interface ipsec_gre0 type=gre \
+ options:local_ip=1.1.1.1 \
+ options:remote_ip=2.2.2.2 \
+ options:psk=swordfish
+
+ OVS IPsec filters unencrypted packets which carry the same skb mark as
+ `ipsec_skb_mark`. By setting the ipsec_skb_mark as 0/1, OVS IPsec prevents
+ all unencrypted tunnel packets leaving the host since the default skb mark
+ value for tunnel packets are 0. This affects all OVS tunnels including those
+ without IPsec being set up. You can install OpenFlow rules to whitelist
+ those non-IPsec tunnels by setting the skb mark of the tunnel traffic as
+ non-zero value.
+
+3) Setting `ipsec_skb_mark` as 1/1 only filters tunnel packets with skb mark
+ value being 1::
+
+ $ ovs-vsctl set Open_vSwitch . other_config:ipsec_skb_mark=1/1
+ $ ovs-vsctl add-port br0 ipsec_gre0 -- \
+ set interface ipsec_gre0 type=gre \
+ options:local_ip=1.1.1.1 \
+ options:remote_ip=2.2.2.2 \
+ options:psk=swordfish
+
+ Opposite to 2), this mode doesn't filter unencrypted tunnel packets by
+ default. To filter unencrypted IPsec tunnel traffic, you need to explicitly
+ set skb mark to a non-zero value for those tunnel traffic by installing
+ OpenFlow rules.
+
+Bug Reporting
+-------------
+
+If you think you may have found a bug with security implications, like
+
+1) IPsec protected tunnel accepted packets that came unencrypted; OR
+2) IPsec protected tunnel allowed packets to leave unencrypted;
+
+Then report such bugs according to :doc:`/internals/security`.
+
+If bug does not have security implications, then report it according to
+instructions in :doc:`/internals/bugs`.
@@ -40,6 +40,7 @@ vSwitch.
:maxdepth: 2
faucet
+ ipsec
ovs-advanced
ovn-sandbox
ovn-openstack
new file mode 100644
@@ -0,0 +1,342 @@
+..
+ Licensed under the Apache License, Version 2.0 (the "License"); you may
+ not use this file except in compliance with the License. You may obtain
+ a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+ WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
+ License for the specific language governing permissions and limitations
+ under the License.
+
+ Convention for heading levels in Open vSwitch documentation:
+
+ ======= Heading 0 (reserved for the title in a document)
+ ------- Heading 1
+ ~~~~~~~ Heading 2
+ +++++++ Heading 3
+ ''''''' Heading 4
+
+ Avoid deeper levels because they do not render well.
+
+==================
+OVS IPsec Tutorial
+==================
+
+This document provides a step-by-step guide for running IPsec tunnel in Open
+vSwitch. A more detailed description on OVS IPsec tunnel and its
+configuration modes can be found in :doc:`/howto/ipsec`.
+
+Requirements
+------------
+
+OVS IPsec tunnel requires Linux kernel (>= v4.13.0) and OVS out-of-tree kernel
+module. The compatible IKE daemons are LibreSwan (>= v3.23) and StrongSwan
+(>= v5.3.5).
+
+.. _install-ovs-ipsec:
+
+Installing OVS and IPsec Packages
+---------------------------------
+
+OVS IPsec has .deb and .rpm packages. You should use the right package
+based on your Linux distribution. This tutorial uses Ubuntu 16.04 and Fedora 27
+as examples.
+
+Ubuntu
+~~~~~~
+
+1. Follow :doc:`/intro/install/debian` to build debian packages.
+
+ .. note::
+
+ If you have already installed OVS, then you only need to install
+ openvswitch-pki_*.deb and openvswitch-ipsec_*.deb in the following step.
+ If your kernel version is below v4.13.0, update your kernel to v4.13.0 or
+ above.
+
+2. Install the related packages::
+
+ $ apt-get install dkms strongswan
+ $ dpkg -i libopenvswitch_*.deb openvswitch-common_*.deb \
+ openvswitch-switch_*.deb openvswitch-datapath-dkms_*.deb \
+ python-openvswitch_*.deb openvswitch-pki_*.deb \
+ openvswitch-ipsec_*.deb
+
+ If the installation is successful, you should be able to see the
+ ovs-monitor-ipsec daemon is running in your system.
+
+Fedora
+~~~~~~
+
+1. Follow :doc:`/intro/install/fedora` to build RPM packages.
+
+2. Install the related packages::
+
+ $ dnf install python2-openvswitch libreswan \
+ "kernel-devel-uname-r == $(uname -r)"
+ $ rpm -i openvswitch-*.rpm openvswitch-kmod-*.rpm \
+ openvswitch-openvswitch-ipsec-*.rpm
+
+3. Install firewall rules to allow ESP traffic::
+
+ $ iptables -A IN_FedoraServer_allow -p esp -j ACCEPT
+
+4. Run the openvswitch-ipsec service::
+
+ $ systemctl start openvswitch-ipsec.service
+
+ .. note::
+
+ The SELinux policies might prevent openvswitch-ipsec.service to access
+ certain resources. You can configure SELinux to remove such restrictions.
+
+Configuring IPsec tunnel
+------------------------
+
+Suppose you want to build IPsec tunnel between two hosts. `host_1`'s external
+IP is `ip_1`. `host_2`'s external IP is `ip_2`.
+
+1. Set up OVS bridges in both hosts.
+
+ In `host_1`::
+
+ $ ovs-vsctl add-br br-ipsec
+ $ ip addr add 192.0.0.1/24 dev br-ipsec
+ $ ip link set br-ipsec up
+
+ In `host_2`::
+
+ $ ovs-vsctl add-br br-ipsec
+ $ ip addr add 192.0.0.2/24 dev br-ipsec
+ $ ip link set br-ipsec up
+
+2. Set up IPsec tunnel.
+
+ There are three authentication methods. You can choose one to set up your
+ IPsec tunnel.
+
+ a) Using pre-shared key
+
+ In `host_1`::
+
+ $ ovs-vsctl add-port br-ipsec tun -- \
+ set interface tun type=gre \
+ options:local_ip=ip_1 \
+ options:remote_ip=ip_2 \
+ options:psk=swordfish
+
+ In `host_2`::
+
+ $ ovs-vsctl add-port br-ipsec tun -- \
+ set interface tun type=gre \
+ options:local_ip=ip_2 \
+ options:remote_ip=ip_1 \
+ options:psk=swordfish
+
+ .. note::
+
+ Pre-shared key (PSK) based authentication is easy to set up but less
+ secure compared with other authentication methods. You should use it
+ cautiously in production system.
+
+ b) Using self-signed certificate
+
+ Generate self-signed certificate in both `host_1` and `host_2`. Then copy
+ the certificate of `host_1` to `host_2` and the certificate of `host_2`
+ to `host_1`.
+
+ In `host_1`::
+
+ $ ovs-pki req -u host_1
+ $ ovs-pki self-sign host_1
+ $ scp host_1-cert.pem host_2@ip_2:/path/to/host_1-cert.pem
+
+ In `host_2`::
+
+ $ ovs-pki req -u host_2
+ $ ovs-pki self-sign host_2
+ $ scp host_2-cert.pem host_1@ip_1:/path/to/host_2-cert.pem
+
+ .. note::
+
+ If you use StrongSwan as IKE daemon, please move the host certificates
+ to /etc/ipsec.d/certs/ and private key to /etc/ipsec.d/private/ so that
+ StrongSwan has permission to access those files.
+
+ Configure IPsec tunnel to use self-signed certificate.
+
+ In `host_1`::
+
+ $ ovs-vsctl set Open_vSwitch . \
+ other_config:certificate=/path/to/host_1-cert.pem \
+ other_config:private_key=/path/to/host_1-privkey.pem
+ $ ovs-vsctl add-port br-ipsec tun -- \
+ set interface tun type=gre \
+ options:local_ip=ip_1 \
+ options:remote_ip=ip_2 \
+ options:remote_cert=/path/to/host_2-cert.pem
+
+ In `host_2`::
+
+ $ ovs-vsctl set Open_vSwitch . \
+ other_config:certificate=/path/to/host_2-cert.pem \
+ other_config:private_key=/path/to/host_2-privkey.pem
+ $ ovs-vsctl add-port br-ipsec tun -- \
+ set interface tun type=gre \
+ options:local_ip=ip_2 \
+ options:remote_ip=ip_1 \
+ options:remote_cert=/path/to/host_1-cert.pem
+
+ .. note::
+
+ The security of the private key is very critical. Don't copy the
+ private key to unsafe place.
+
+ c) Using CA-signed certificate
+
+ First you need to establish a public key infrastructure (PKI). Suppose
+ you choose `host_1` to host PKI.
+
+ In `host_1`::
+
+ $ ovs-pki init
+
+ Generate certificate requests and copy the certificate request of
+ `host_2` to `host_1`.
+
+ In `host_1`::
+
+ $ ovs-pki req -u host_1
+
+ In `host_2`::
+
+ $ ovs-pki req -u host_2
+ $ scp host_2-req.pem host_1@ip_1:/path/to/host_2-req.pem
+
+ Sign the certificate requests with the CA key. Copy `host_2`'s signed
+ certificate and the CA certificate to `host_2`.
+
+ In `host_1`::
+
+ $ ovs-pki sign host_1 switch
+ $ ovs-pki sign host_2 switch
+ $ scp host_2-cert.pem host_2@ip_2:/path/to/host_2-cert.pem
+ $ scp /var/lib/openvswitch/pki/switchca/cacert.pem \
+ host_2@ip_2:/path/to/cacert.pem
+
+ .. note::
+
+ If you use StrongSwan as IKE daemon, please move the host certificates
+ to /etc/ipsec.d/certs/, CA certificate to /etc/ipsec.d/cacerts/, and
+ private key to /etc/ipsec.d/private/ so that StrongSwan has permission
+ to access those files.
+
+ Configure IPsec tunnel to use CA-signed certificate.
+
+ In `host_1`::
+
+ $ ovs-vsctl set Open_vSwitch . \
+ other_config:certificate=/path/to/host_1-cert.pem \
+ other_config:private_key=/path/to/host_1-privkey.pem \
+ other_config:ca_cert=/path/to/cacert.pem
+ $ ovs-vsctl add-port br-ipsec tun -- \
+ set interface tun type=gre \
+ options:local_ip=ip_1 \
+ options:remote_ip=ip_2 \
+ options:remote_name=host_2
+
+ In `host_2`::
+
+ $ ovs-vsctl set Open_vSwitch . \
+ other_config:certificate=/path/to/host_2-cert.pem \
+ other_config:private_key=/path/to/host_2-privkey.pem \
+ other_config:ca_cert=/path/to/cacert.pem
+ $ ovs-vsctl add-port br-ipsec tun -- \
+ set interface tun type=gre \
+ options:local_ip=ip_2 \
+ options:remote_ip=ip_1 \
+ options:remote_name=host_1
+
+ .. note::
+
+ remote_name is the common name (CN) of the signed-certificate. It
+ should be set correctly so that only certificate with the expected CN
+ can be authenticated.
+
+3. Test IPsec tunnel.
+
+ Now you should have an IPsec GRE tunnel running between two hosts. To verify
+ it, in `host_1`::
+
+ $ ping 192.0.0.2 &
+ $ tcpdump -ni any net ip_2
+
+ You should be able to see that ESP packets are being sent from `host_1` to
+ `host_2`.
+
+Troubleshooting
+---------------
+
+Use following ovs-apptcl command to get ovs-monitor-ipsec internal
+representation of tunnel configuration::
+
+ $ ovs-appctl -t ovs-monitor-ipsec tunnels/show
+
+If there is misconfiguration then ovs-appctl should indicate why.
+For example::
+
+ Interface name: gre0 v5 (CONFIGURED) <--- Should be set to CONFIGURED.
+ Otherwise, error message will
+ be provided
+ Tunnel Type: gre
+ Local IP: 1.1.1.1
+ Remote IP: 2.2.2.2
+ SKB mark: None
+ Local cert: None
+ Local name: None
+ Local key: None
+ Remote cert: None
+ Remote name: None
+ CA cert: None
+ PSK: swordfish
+ Ofport: 1 <--- Whether ovs-vswitchd has assigned Ofport
+ number to this Tunnel Port
+ CFM state: Up <--- Whether CFM declared this tunnel healthy
+ Kernel policies installed:
+ ... <--- IPsec policies for this OVS tunnel in
+ Linux Kernel installed by strongSwan
+ Kernel security associations installed:
+ ... <--- IPsec security associations for this OVS
+ tunnel in Linux Kernel installed by
+ strongswan
+ IPsec connections that are active:
+ ... <--- IPsec "connections" for this OVS
+ tunnel
+
+If you don't see any active connections, try to run the following command to
+refresh the ovs-monitor-ipsec daemon::
+
+ $ ovs-appctl -t ovs-monitor-ipsec refresh
+
+You can also check the logs of the ovs-monitor-ipsec daemon and the IKE daemon
+to locate issues. The logs of the ovs-monitor-ipsec is in
+/var/log/openvswitch/ovs-monitor-ipsec.log.
+
+Bug Reporting
+-------------
+
+If you think you may have found a bug with security implications, like
+
+1. IPsec protected tunnel accepted packets that came unencrypted; OR
+2. IPsec protected tunnel allowed packets to leave unencrypted;
+
+Then report such bugs according to :doc:`/internals/security`.
+
+If bug does not have security implications, then report it according to
+instructions in :doc:`/internals/bugs`.
+
+If you have suggestions to improve this tutorial, please send a email to
+ovs-discuss@openvswitch.org.
@@ -503,10 +503,8 @@
OpenFlow specification mandates the timeout to be at least one
second. The default is 10 seconds.
</p>
- </column>
-
+ </column>
</group>
-
<group title="Status">
<column name="next_cfg">
Sequence number for client to increment. When a client modifies
@@ -770,6 +768,85 @@
</column>
</group>
+ <group title="IPsec">
+ <p>
+ The global configuration of IPsec tunnels is set in the
+ <code>other_config</code> column of the <code>Open_vSwitch</code>
+ table. The individual IPsec tunnel configuration is set in the
+ <code>options</code> column of the <code>Interface</code> table.
+ </p>
+ <p>
+ <code>ipsec_skb_mark</code> is set to choose forwarding mode which
+ prevents unencrypted packets being sent out since there is delay
+ between the user setting up IPsec tunnel and the IPsec tunnel actually
+ taking affect to encrypt packets.
+ </p>
+ <p>
+ There are three authentication modes:
+ </p>
+ <ol>
+ <li>
+ Pre-shared key mode: <code>private_key</code>,
+ <code>certificate</code>, and <code>ca_cert</code> must not be set.
+ <code>psk</code> in the <code>options</code> column of the
+ <code>Interface</code> table should be set as the preshared key.
+ </li>
+ <li>
+ Self-signed certificate mode: <code>private_key</code> and
+ <code>certificate</code> must be set. <code>remote_cert</code> in the
+ <code>options</code> column of the <code>Interface</code> table must
+ be set. The remote certificate can be self-signed.
+ </li>
+ <li>
+ CA-signed certificate mode: <code>private_key</code>,
+ <code>certificate</code>, and <code>ca_cert</code> must be set.
+ <code>remote_name</code> in the <code>options</code> column of the
+ <code>Interface</code> table must be set as the common name (CN) of
+ the remote certificate. The remote certificate must be signed by the
+ CA.
+ </li>
+ </ol>
+ <column name="other_config" key="ipsec_skb_mark"
+ type='{"type": "string"}'>
+ <p>
+ Setting ipsec_skb_mark as 1/1 blocks unecrypted packets with skb
+ mark setting as 1. Besides, the OpenFlow rule with set SKB mark
+ action specified in OVSDB needs to be installed in Open_vSwitch
+ table before the first packet was able to leave the OVS tunnel.
+ </p>
+ <p>
+ Setting ipsec_skb_mark as 0/1 blocks unecrypted packets without skb
+ mark. As a result, IPsec assumes that all packets coming from
+ tunnels should be encrypted unless OpenFlow actions explicitly
+ set skb mark to a non-zero value.
+ </p>
+ </column>
+ <column name="other_config" key="private_key"
+ type='{"type": "string"}'>
+ <p>
+ Name of a PEM file containing the private key used as the switch's
+ identity for IPsec tunnels.
+ </p>
+ </column>
+ <column name="other_config" key="certificate"
+ type='{"type": "string"}'>
+ <p>
+ Name of a PEM file containing a certificate that certifies the
+ switch's private key, and identifies a trustworthy switch for IPsec
+ tunnels. The certificate must be x.509 version 3 and with the
+ string in common name (CN) also set in the subject alternative name
+ (SAN).
+ </p>
+ </column>
+ <column name="other_config" key="ca_cert"
+ type='{"type": "string"}'>
+ <p>
+ Name of a PEM file containing the CA certificate used to verify
+ that a remote switch of the IPsec tunnel is trustworthy.
+ </p>
+ </column>
+ </group>
+
<group title="Common Columns">
The overall purpose of these columns is described under <code>Common
Columns</code> at the beginning of this document.
@@ -1409,7 +1486,7 @@
<column name="external_ids"/>
</group>
</table>
-
+
<table name="Port" table="Port or bond configuration.">
<p>A port within a <ref table="Bridge"/>.</p>
<p>Most commonly, a port has exactly one ``interface,'' pointed to by its
@@ -2398,9 +2475,9 @@
<column name="options" key="local_ip">
<p>
- Optional. The tunnel destination IP that received packets must
- match. Default is to match all addresses. If specified, may be one
- of:
+ Optional (except for IPsec tunnels). The tunnel destination IP that
+ received packets must match. Default is to match all addresses. If
+ specified, may be one of:
</p>
<ul>
@@ -2655,7 +2732,7 @@
<column name="options" key="csum" type='{"type": "boolean"}'>
<p>
- Optional. Compute encapsulation header (either GRE or UDP)
+ Optional. Compute encapsulation header (either GRE or UDP)
checksums on outgoing packets. Default is disabled, set to
<code>true</code> to enable. Checksums present on incoming
packets will be validated regardless of this setting.
@@ -2673,8 +2750,35 @@
</column>
</group>
- </group>
+ <group title="Tunnel Options: IPsec">
+ <p>
+ <code>gre</code>, <code>geneve</code>, <code>vxlan</code>, and
+ <code>stt</code> interfaces support these options.
+ </p>
+ <column name="options" key="psk" type='{"type": "string"}'>
+ <p>
+ The preshared secret to negotiate tunnel in PSK mode. This value
+ must match on both tunnel ends and must be unset when
+ <code>remote_cert</code> or <code>remote_name</code>is set.
+ </p>
+ </column>
+ <column name="options" key="remote_cert" type='{"type": "string"}'>
+ <p>
+ Name of a PEM file containing a certificate of the remote switch.
+ The certificate must be x.509 version 3 and with the string in
+ common name (CN) also set in the subject alternative name (SAN). It
+ must be unset when <code>psk</code> is set.
+ </p>
+ </column>
+ <column name="options" key="remote_name" type='{"type": "string"}'>
+ <p>
+ Common name (CN) of the remote certificate. It must be unset when
+ <code>psk</code> is set.
+ </p>
+ </column>
+ </group>
+ </group>
<group title="Tunnel Options: erspan only">
<p>
Only <code>erspan</code> interfaces support these options.