@@ -695,7 +695,8 @@ dtb-$(CONFIG_ARCH_ASPEED) += \
ast2600-slt.dtb \
ast2600-tacoma.dtb \
ast2600-intel.dtb \
- ast2600-tacoma.dtb
+ ast2600-tacoma.dtb \
+ ast2600-inspur-nf5280m7.dtb
dtb-$(CONFIG_ARCH_STI) += stih410-b2260.dtb
new file mode 100644
@@ -0,0 +1,190 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright 2023 Inspur Corp.
+/dts-v1/;
+
+#include "ast2600-u-boot.dtsi"
+
+/ {
+ model = "Inspur SCM V1";
+ compatible = "inspur,nf5280m7-bmc", "aspeed,ast2600";
+
+ memory {
+ device_type = "memory";
+ reg = <0x80000000 0x40000000>;
+ };
+
+ chosen {
+ stdout-path = &uart5;
+ };
+
+ aliases {
+ mmc0 = &emmc_slot0;
+ mmc1 = &sdhci_slot0;
+ mmc2 = &sdhci_slot1;
+ spi0 = &fmc;
+ spi1 = &spi1;
+ spi2 = &spi2;
+ ethernet1 = &mac1;
+ };
+
+ cpus {
+ cpu@0 {
+ clock-frequency = <1200000000>;
+ };
+ cpu@1 {
+ clock-frequency = <1200000000>;
+ };
+ };
+};
+
+&gpio0 {
+ status = "okay";
+};
+
+&uart1 {
+ status = "okay";
+};
+
+&uart2 {
+ status = "okay";
+};
+
+&uart5 {
+ u-boot,dm-pre-reloc;
+ status = "okay";
+};
+
+&sdrammc {
+ clock-frequency = <400000000>;
+};
+
+&mdio {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_mdio2_default>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ ethphy0: ethernet-phy@0 {
+ reg = <0>;
+ };
+
+ ethphy1: ethernet-phy@1 {
+ reg = <0>;
+ };
+
+ ethphy2: ethernet-phy@2 {
+ reg = <0>;
+ };
+
+ ethphy3: ethernet-phy@3 {
+ reg = <0>;
+ };
+};
+
+&mac1 {
+ status = "okay";
+ phy-mode = "rgmii";
+ phy-handle = <ðphy1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rgmii2_default>;
+};
+
+&fmc {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_fmcquad_default>;
+ flash@0 {
+ status = "okay";
+ spi-max-frequency = <40000000>;
+ spi-tx-bus-width = <4>;
+ spi-rx-bus-width = <4>;
+ };
+ flash@1 {
+ status = "okay";
+ spi-max-frequency = <40000000>;
+ spi-tx-bus-width = <4>;
+ spi-rx-bus-width = <4>;
+ };
+};
+
+&i2c1 {
+ status = "okay";
+ multi-master;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2_default>;
+};
+
+&i2c4 {
+ status = "okay";
+ multi-master;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c5_default>;
+};
+
+&i2c5 {
+ status = "okay";
+ multi-master;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c6_default>;
+};
+
+&i2c6 {
+ status = "okay";
+ multi-master;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c7_default>;
+};
+
+&i2c7 {
+ status = "okay";
+ multi-master;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c8_default>;
+};
+
+&i2c8 {
+ status = "okay";
+ multi-master;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c9_default>;
+};
+
+&i2c9 {
+ status = "okay";
+ multi-master;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c10_default>;
+};
+
+&i2c12 {
+ status = "okay";
+ multi-master;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c13_default>;
+};
+
+&i2c13 {
+ status = "okay";
+ multi-master;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c14_default>;
+};
+
+&hace {
+ u-boot,dm-pre-reloc;
+ status = "okay";
+};
+
+&acry {
+ u-boot,dm-pre-reloc;
+ status = "disabled";
+};
@@ -51,6 +51,13 @@ config TARGET_QUALCOMM_DC_SCM_V1
QUALCOMM-DC-SCM-V1 is a Qualcomm DC-SCM V1 board which is
equipped with AST2600.
+config TARGET_AST2600_INSPUR
+ bool "AST2600-INSPUR"
+ depends on ASPEED_AST2600
+ help
+ AST2600-INSPUR is an Inspur SCM V1 board which is
+ equipped with AST2600.
+
endchoice
source "board/aspeed/evb_ast2600/Kconfig"
@@ -59,5 +66,6 @@ source "board/aspeed/slt_ast2600/Kconfig"
source "board/aspeed/ast2600_ibm/Kconfig"
source "board/aspeed/ast2600_intel/Kconfig"
source "board/qualcomm/dc-scm-v1/Kconfig"
+source "board/aspeed/ast2600_inspur/Kconfig"
endif
new file mode 100644
@@ -0,0 +1,13 @@
+if TARGET_AST2600_INSPUR
+
+config SYS_BOARD
+ default "ast2600_inspur"
+
+config SYS_VENDOR
+ default "aspeed"
+
+config SYS_CONFIG_NAME
+ string "board configuration name"
+ default "ast2600_inspur"
+
+endif
new file mode 100644
@@ -0,0 +1 @@
+obj-y += inspur.o
new file mode 100644
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2023 Inspur Corp.
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/gpio.h>
+#include <dt-bindings/gpio/aspeed-gpio.h>
+
+int board_late_init(void)
+{
+ /* GPIOB[2] output low*/
+ gpio_request(ASPEED_GPIO(B, 2), "");
+ gpio_direction_output(ASPEED_GPIO(B, 2) , GPIO_ACTIVE_LOW);
+
+ return 0;
+}