| Message ID | 20210712220447.957418-10-iwona.winiarska@intel.com |
|---|---|
| State | New |
| Headers | show |
| Series | Introduce PECI subsystem | expand |
On Mon, Jul 12, 2021 at 05:04:42PM CDT, Iwona Winiarska wrote: >Here we're adding support for PECI device drivers, which unlike PECI >controller drivers are actually able to provide functionalities to >userspace. > >We're also extending peci_request API to allow querying more details >about PECI device (e.g. model/family), that's going to be used to find >a compatible peci_driver. > >Signed-off-by: Iwona Winiarska <iwona.winiarska@intel.com> >Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> >--- > drivers/peci/Kconfig | 1 + > drivers/peci/core.c | 49 +++++++++ > drivers/peci/device.c | 99 ++++++++++++++++++ > drivers/peci/internal.h | 75 ++++++++++++++ > drivers/peci/request.c | 217 ++++++++++++++++++++++++++++++++++++++++ > include/linux/peci.h | 19 ++++ > lib/Kconfig | 2 +- > 7 files changed, 461 insertions(+), 1 deletion(-) > >diff --git a/drivers/peci/Kconfig b/drivers/peci/Kconfig >index 0d0ee8009713..27c31535843c 100644 >--- a/drivers/peci/Kconfig >+++ b/drivers/peci/Kconfig >@@ -2,6 +2,7 @@ > > menuconfig PECI > tristate "PECI support" >+ select GENERIC_LIB_X86 > help > The Platform Environment Control Interface (PECI) is an interface > that provides a communication channel to Intel processors and >diff --git a/drivers/peci/core.c b/drivers/peci/core.c >index ae7a9572cdf3..94426b7f2618 100644 >--- a/drivers/peci/core.c >+++ b/drivers/peci/core.c >@@ -143,8 +143,57 @@ void peci_controller_remove(struct peci_controller *controller) > } > EXPORT_SYMBOL_NS_GPL(peci_controller_remove, PECI); > >+static const struct peci_device_id * >+peci_bus_match_device_id(const struct peci_device_id *id, struct peci_device *device) >+{ >+ while (id->family != 0) { >+ if (id->family == device->info.family && >+ id->model == device->info.model) >+ return id; >+ id++; >+ } >+ >+ return NULL; >+} >+ >+static int peci_bus_device_match(struct device *dev, struct device_driver *drv) >+{ >+ struct peci_device *device = to_peci_device(dev); >+ struct peci_driver *peci_drv = to_peci_driver(drv); >+ >+ if (dev->type != &peci_device_type) >+ return 0; >+ >+ if (peci_bus_match_device_id(peci_drv->id_table, device)) >+ return 1; >+ >+ return 0; >+} >+ >+static int peci_bus_device_probe(struct device *dev) >+{ >+ struct peci_device *device = to_peci_device(dev); >+ struct peci_driver *driver = to_peci_driver(dev->driver); >+ >+ return driver->probe(device, peci_bus_match_device_id(driver->id_table, device)); >+} >+ >+static int peci_bus_device_remove(struct device *dev) >+{ >+ struct peci_device *device = to_peci_device(dev); >+ struct peci_driver *driver = to_peci_driver(dev->driver); >+ >+ if (driver->remove) >+ driver->remove(device); >+ >+ return 0; >+} >+ > struct bus_type peci_bus_type = { > .name = "peci", >+ .match = peci_bus_device_match, >+ .probe = peci_bus_device_probe, >+ .remove = peci_bus_device_remove, > .bus_groups = peci_bus_groups, > }; > >diff --git a/drivers/peci/device.c b/drivers/peci/device.c >index 1124862211e2..8c4bd1ebbc29 100644 >--- a/drivers/peci/device.c >+++ b/drivers/peci/device.c >@@ -1,11 +1,79 @@ > // SPDX-License-Identifier: GPL-2.0-only > // Copyright (c) 2018-2021 Intel Corporation > >+#include <linux/bitfield.h> > #include <linux/peci.h> > #include <linux/slab.h> >+#include <linux/x86/cpu.h> > > #include "internal.h" > >+#define REVISION_NUM_MASK GENMASK(15, 8) >+static int peci_get_revision(struct peci_device *device, u8 *revision) >+{ >+ struct peci_request *req; >+ u64 dib; >+ >+ req = peci_get_dib(device); >+ if (IS_ERR(req)) >+ return PTR_ERR(req); >+ >+ dib = peci_request_data_dib(req); >+ if (dib == 0) { >+ peci_request_free(req); >+ return -EIO; Any particular reason to check for zero specifically here? It looks like that would be a case where the host CPU responds and everything's otherwise fine, but the host just happened to send back a bunch of zeros for whatever reason -- which may not be a valid PECI revision number, but if it sent back a bunch of 0xff bytes instead wouldn't that be equally invalid? Also, given that the docs (the ones I have, at least) describe the DIB as a collection of individual bytes, dealing with it as a combined u64 seems a bit confusing to me -- could we just return req->rx.buf[1] instead? >+ } >+ >+ *revision = FIELD_GET(REVISION_NUM_MASK, dib); >+ >+ peci_request_free(req); >+ >+ return 0; >+} >+ >+static int peci_get_cpu_id(struct peci_device *device, u32 *cpu_id) >+{ >+ struct peci_request *req; >+ int ret; >+ >+ req = peci_pkg_cfg_readl(device, PECI_PCS_PKG_ID, PECI_PKG_ID_CPU_ID); >+ if (IS_ERR(req)) >+ return PTR_ERR(req); >+ >+ ret = peci_request_status(req); >+ if (ret) >+ goto out_req_free; >+ >+ *cpu_id = peci_request_data_readl(req); >+out_req_free: As suggested on patch #8, I think it might be cleaner to stack-allocate struct peci_request, which would obviate the need for explicit free calls in functions like this and hence might simplify it away entirely, but if this does remain like this we could just do if (!ret) *cpu_id = peci_request_data_readl(req); instead of using a goto to skip a single line. >+ peci_request_free(req); >+ >+ return ret; >+} >+ >+static int peci_device_info_init(struct peci_device *device) >+{ >+ u8 revision; >+ u32 cpu_id; >+ int ret; >+ >+ ret = peci_get_cpu_id(device, &cpu_id); >+ if (ret) >+ return ret; >+ >+ device->info.family = x86_family(cpu_id); >+ device->info.model = x86_model(cpu_id); >+ >+ ret = peci_get_revision(device, &revision); >+ if (ret) >+ return ret; >+ device->info.peci_revision = revision; >+ >+ device->info.socket_id = device->addr - PECI_BASE_ADDR; >+ >+ return 0; >+} >+ > static int peci_detect(struct peci_controller *controller, u8 addr) > { > struct peci_request *req; >@@ -75,6 +143,10 @@ int peci_device_create(struct peci_controller *controller, u8 addr) > device->dev.bus = &peci_bus_type; > device->dev.type = &peci_device_type; > >+ ret = peci_device_info_init(device); >+ if (ret) >+ goto err_free; >+ > ret = dev_set_name(&device->dev, "%d-%02x", controller->id, device->addr); > if (ret) > goto err_free; >@@ -98,6 +170,33 @@ void peci_device_destroy(struct peci_device *device) > device_unregister(&device->dev); > } > >+int __peci_driver_register(struct peci_driver *driver, struct module *owner, >+ const char *mod_name) >+{ >+ driver->driver.bus = &peci_bus_type; >+ driver->driver.owner = owner; >+ driver->driver.mod_name = mod_name; >+ >+ if (!driver->probe) { >+ pr_err("peci: trying to register driver without probe callback\n"); >+ return -EINVAL; >+ } >+ >+ if (!driver->id_table) { >+ pr_err("peci: trying to register driver without device id table\n"); >+ return -EINVAL; >+ } >+ >+ return driver_register(&driver->driver); >+} >+EXPORT_SYMBOL_NS_GPL(__peci_driver_register, PECI); >+ >+void peci_driver_unregister(struct peci_driver *driver) >+{ >+ driver_unregister(&driver->driver); >+} >+EXPORT_SYMBOL_NS_GPL(peci_driver_unregister, PECI); >+ > static void peci_device_release(struct device *dev) > { > struct peci_device *device = to_peci_device(dev); >diff --git a/drivers/peci/internal.h b/drivers/peci/internal.h >index 6b139adaf6b8..c891c93e077a 100644 >--- a/drivers/peci/internal.h >+++ b/drivers/peci/internal.h >@@ -19,6 +19,34 @@ struct peci_request; > struct peci_request *peci_request_alloc(struct peci_device *device, u8 tx_len, u8 rx_len); > void peci_request_free(struct peci_request *req); > >+int peci_request_status(struct peci_request *req); >+u64 peci_request_data_dib(struct peci_request *req); >+ >+u8 peci_request_data_readb(struct peci_request *req); >+u16 peci_request_data_readw(struct peci_request *req); >+u32 peci_request_data_readl(struct peci_request *req); >+u64 peci_request_data_readq(struct peci_request *req); >+ >+struct peci_request *peci_get_dib(struct peci_device *device); >+struct peci_request *peci_get_temp(struct peci_device *device); >+ >+struct peci_request *peci_pkg_cfg_readb(struct peci_device *device, u8 index, u16 param); >+struct peci_request *peci_pkg_cfg_readw(struct peci_device *device, u8 index, u16 param); >+struct peci_request *peci_pkg_cfg_readl(struct peci_device *device, u8 index, u16 param); >+struct peci_request *peci_pkg_cfg_readq(struct peci_device *device, u8 index, u16 param); >+ >+/** >+ * struct peci_device_id - PECI device data to match >+ * @data: pointer to driver private data specific to device >+ * @family: device family >+ * @model: device model >+ */ >+struct peci_device_id { >+ const void *data; >+ u16 family; >+ u8 model; >+}; >+ > extern struct device_type peci_device_type; > extern const struct attribute_group *peci_device_groups[]; > >@@ -28,6 +56,53 @@ void peci_device_destroy(struct peci_device *device); > extern struct bus_type peci_bus_type; > extern const struct attribute_group *peci_bus_groups[]; > >+/** >+ * struct peci_driver - PECI driver >+ * @driver: inherit device driver >+ * @probe: probe callback >+ * @remove: remove callback >+ * @id_table: PECI device match table to decide which device to bind >+ */ >+struct peci_driver { >+ struct device_driver driver; >+ int (*probe)(struct peci_device *device, const struct peci_device_id *id); >+ void (*remove)(struct peci_device *device); >+ const struct peci_device_id *id_table; >+}; >+ >+static inline struct peci_driver *to_peci_driver(struct device_driver *d) >+{ >+ return container_of(d, struct peci_driver, driver); >+} >+ >+int __peci_driver_register(struct peci_driver *driver, struct module *owner, >+ const char *mod_name); >+/** >+ * peci_driver_register() - register PECI driver >+ * @driver: the driver to be registered >+ * @owner: owner module of the driver being registered >+ * @mod_name: module name string >+ * >+ * PECI drivers that don't need to do anything special in module init should >+ * use the convenience "module_peci_driver" macro instead >+ * >+ * Return: zero on success, else a negative error code. >+ */ >+#define peci_driver_register(driver) \ >+ __peci_driver_register(driver, THIS_MODULE, KBUILD_MODNAME) >+void peci_driver_unregister(struct peci_driver *driver); >+ >+/** >+ * module_peci_driver() - Helper macro for registering a modular PECI driver >+ * @__peci_driver: peci_driver struct >+ * >+ * Helper macro for PECI drivers which do not do anything special in module >+ * init/exit. This eliminates a lot of boilerplate. Each module may only >+ * use this macro once, and calling it replaces module_init() and module_exit() >+ */ >+#define module_peci_driver(__peci_driver) \ >+ module_driver(__peci_driver, peci_driver_register, peci_driver_unregister) >+ > extern struct device_type peci_controller_type; > > int peci_controller_scan_devices(struct peci_controller *controller); >diff --git a/drivers/peci/request.c b/drivers/peci/request.c >index 78cee51dfae1..48354455b554 100644 >--- a/drivers/peci/request.c >+++ b/drivers/peci/request.c >@@ -1,13 +1,142 @@ > // SPDX-License-Identifier: GPL-2.0-only > // Copyright (c) 2021 Intel Corporation > >+#include <linux/bug.h> > #include <linux/export.h> > #include <linux/peci.h> > #include <linux/slab.h> > #include <linux/types.h> > >+#include <asm/unaligned.h> >+ > #include "internal.h" > >+#define PECI_GET_DIB_CMD 0xf7 >+#define PECI_GET_DIB_WR_LEN 1 >+#define PECI_GET_DIB_RD_LEN 8 >+ >+#define PECI_RDPKGCFG_CMD 0xa1 >+#define PECI_RDPKGCFG_WRITE_LEN 5 >+#define PECI_RDPKGCFG_READ_LEN_BASE 1 >+#define PECI_WRPKGCFG_CMD 0xa5 >+#define PECI_WRPKGCFG_WRITE_LEN_BASE 6 >+#define PECI_WRPKGCFG_READ_LEN 1 >+ >+/* Device Specific Completion Code (CC) Definition */ >+#define PECI_CC_SUCCESS 0x40 >+#define PECI_CC_NEED_RETRY 0x80 >+#define PECI_CC_OUT_OF_RESOURCE 0x81 >+#define PECI_CC_UNAVAIL_RESOURCE 0x82 >+#define PECI_CC_INVALID_REQ 0x90 >+#define PECI_CC_MCA_ERROR 0x91 >+#define PECI_CC_CATASTROPHIC_MCA_ERROR 0x93 >+#define PECI_CC_FATAL_MCA_ERROR 0x94 >+#define PECI_CC_PARITY_ERR_GPSB_OR_PMSB 0x98 >+#define PECI_CC_PARITY_ERR_GPSB_OR_PMSB_IERR 0x9B >+#define PECI_CC_PARITY_ERR_GPSB_OR_PMSB_MCA 0x9C >+ >+#define PECI_RETRY_BIT BIT(0) >+ >+#define PECI_RETRY_TIMEOUT msecs_to_jiffies(700) >+#define PECI_RETRY_INTERVAL_MIN msecs_to_jiffies(1) >+#define PECI_RETRY_INTERVAL_MAX msecs_to_jiffies(128) >+ >+static u8 peci_request_data_cc(struct peci_request *req) >+{ >+ return req->rx.buf[0]; >+} >+ >+/** >+ * peci_request_status() - return -errno based on PECI completion code >+ * @req: the PECI request that contains response data with completion code >+ * >+ * It can't be used for Ping(), GetDIB() and GetTemp() - for those commands we >+ * don't expect completion code in the response. >+ * >+ * Return: -errno >+ */ >+int peci_request_status(struct peci_request *req) >+{ >+ u8 cc = peci_request_data_cc(req); >+ >+ if (cc != PECI_CC_SUCCESS) >+ dev_dbg(&req->device->dev, "ret: %#02x\n", cc); >+ >+ switch (cc) { >+ case PECI_CC_SUCCESS: >+ return 0; >+ case PECI_CC_NEED_RETRY: >+ case PECI_CC_OUT_OF_RESOURCE: >+ case PECI_CC_UNAVAIL_RESOURCE: >+ return -EAGAIN; >+ case PECI_CC_INVALID_REQ: >+ return -EINVAL; >+ case PECI_CC_MCA_ERROR: >+ case PECI_CC_CATASTROPHIC_MCA_ERROR: >+ case PECI_CC_FATAL_MCA_ERROR: >+ case PECI_CC_PARITY_ERR_GPSB_OR_PMSB: >+ case PECI_CC_PARITY_ERR_GPSB_OR_PMSB_IERR: >+ case PECI_CC_PARITY_ERR_GPSB_OR_PMSB_MCA: >+ return -EIO; >+ } >+ >+ WARN_ONCE(1, "Unknown PECI completion code: %#02x\n", cc); >+ >+ return -EIO; >+} >+EXPORT_SYMBOL_NS_GPL(peci_request_status, PECI); >+ >+static int peci_request_xfer(struct peci_request *req) >+{ >+ struct peci_device *device = req->device; >+ struct peci_controller *controller = device->controller; >+ int ret; >+ >+ mutex_lock(&controller->bus_lock); >+ ret = controller->xfer(controller, device->addr, req); >+ mutex_unlock(&controller->bus_lock); >+ >+ return ret; >+} >+ >+static int peci_request_xfer_retry(struct peci_request *req) >+{ >+ long wait_interval = PECI_RETRY_INTERVAL_MIN; >+ struct peci_device *device = req->device; >+ struct peci_controller *controller = device->controller; >+ unsigned long start = jiffies; >+ int ret; >+ >+ /* Don't try to use it for ping */ >+ if (WARN_ON(!req->rx.buf)) >+ return 0; >+ >+ do { >+ ret = peci_request_xfer(req); >+ if (ret) { >+ dev_dbg(&controller->dev, "xfer error: %d\n", ret); >+ return ret; >+ } >+ >+ if (peci_request_status(req) != -EAGAIN) >+ return 0; >+ >+ /* Set the retry bit to indicate a retry attempt */ >+ req->tx.buf[1] |= PECI_RETRY_BIT; >+ >+ if (schedule_timeout_interruptible(wait_interval)) >+ return -ERESTARTSYS; >+ >+ wait_interval *= 2; >+ if (wait_interval > PECI_RETRY_INTERVAL_MAX) >+ wait_interval = PECI_RETRY_INTERVAL_MAX; wait_interval = min(wait_interval * 2, PECI_RETRY_INTERVAL_MAX) ? >+ } while (time_before(jiffies, start + PECI_RETRY_TIMEOUT)); >+ >+ dev_dbg(&controller->dev, "request timed out\n"); >+ >+ return -ETIMEDOUT; >+} >+ > /** > * peci_request_alloc() - allocate &struct peci_request with buffers with given lengths > * @device: PECI device to which request is going to be sent >@@ -72,3 +201,91 @@ void peci_request_free(struct peci_request *req) > kfree(req); > } > EXPORT_SYMBOL_NS_GPL(peci_request_free, PECI); >+ >+struct peci_request *peci_get_dib(struct peci_device *device) >+{ >+ struct peci_request *req; >+ int ret; >+ >+ req = peci_request_alloc(device, PECI_GET_DIB_WR_LEN, PECI_GET_DIB_RD_LEN); >+ if (!req) >+ return ERR_PTR(-ENOMEM); >+ >+ req->tx.buf[0] = PECI_GET_DIB_CMD; >+ >+ ret = peci_request_xfer(req); >+ if (ret) { >+ peci_request_free(req); >+ return ERR_PTR(ret); >+ } >+ >+ return req; >+} >+EXPORT_SYMBOL_NS_GPL(peci_get_dib, PECI); >+ >+static struct peci_request * >+__pkg_cfg_read(struct peci_device *device, u8 index, u16 param, u8 len) >+{ >+ struct peci_request *req; >+ int ret; >+ >+ req = peci_request_alloc(device, PECI_RDPKGCFG_WRITE_LEN, >+ PECI_RDPKGCFG_READ_LEN_BASE + len); >+ if (!req) >+ return ERR_PTR(-ENOMEM); >+ >+ req->tx.buf[0] = PECI_RDPKGCFG_CMD; >+ req->tx.buf[1] = 0; >+ req->tx.buf[2] = index; >+ put_unaligned_le16(param, &req->tx.buf[3]); >+ >+ ret = peci_request_xfer_retry(req); >+ if (ret) { >+ peci_request_free(req); >+ return ERR_PTR(ret); >+ } >+ >+ return req; >+} >+ >+u8 peci_request_data_readb(struct peci_request *req) >+{ >+ return req->rx.buf[1]; >+} >+EXPORT_SYMBOL_NS_GPL(peci_request_data_readb, PECI); >+ >+u16 peci_request_data_readw(struct peci_request *req) >+{ >+ return get_unaligned_le16(&req->rx.buf[1]); >+} >+EXPORT_SYMBOL_NS_GPL(peci_request_data_readw, PECI); >+ >+u32 peci_request_data_readl(struct peci_request *req) >+{ >+ return get_unaligned_le32(&req->rx.buf[1]); >+} >+EXPORT_SYMBOL_NS_GPL(peci_request_data_readl, PECI); >+ >+u64 peci_request_data_readq(struct peci_request *req) >+{ >+ return get_unaligned_le64(&req->rx.buf[1]); >+} >+EXPORT_SYMBOL_NS_GPL(peci_request_data_readq, PECI); >+ >+u64 peci_request_data_dib(struct peci_request *req) >+{ >+ return get_unaligned_le64(&req->rx.buf[0]); >+} >+EXPORT_SYMBOL_NS_GPL(peci_request_data_dib, PECI); >+ >+#define __read_pkg_config(x, type) \ >+struct peci_request *peci_pkg_cfg_##x(struct peci_device *device, u8 index, u16 param) \ >+{ \ >+ return __pkg_cfg_read(device, index, param, sizeof(type)); \ >+} \ Is there a reason for this particular API? I'd think a more natural one that would offload a bit of boilerplate from callers would look more like int peci_pkg_cfg_##x(struct peci_device *device, u8 index, u16 param, type *outp), returning peci_request_status() and writing the requested data to *outp if that status is zero. >+EXPORT_SYMBOL_NS_GPL(peci_pkg_cfg_##x, PECI) >+ >+__read_pkg_config(readb, u8); >+__read_pkg_config(readw, u16); >+__read_pkg_config(readl, u32); >+__read_pkg_config(readq, u64); >diff --git a/include/linux/peci.h b/include/linux/peci.h >index cdf3008321fd..f9f37b874011 100644 >--- a/include/linux/peci.h >+++ b/include/linux/peci.h >@@ -9,6 +9,14 @@ > #include <linux/mutex.h> > #include <linux/types.h> > >+#define PECI_PCS_PKG_ID 0 /* Package Identifier Read */ >+#define PECI_PKG_ID_CPU_ID 0x0000 /* CPUID Info */ >+#define PECI_PKG_ID_PLATFORM_ID 0x0001 /* Platform ID */ >+#define PECI_PKG_ID_DEVICE_ID 0x0002 /* Uncore Device ID */ >+#define PECI_PKG_ID_MAX_THREAD_ID 0x0003 /* Max Thread ID */ >+#define PECI_PKG_ID_MICROCODE_REV 0x0004 /* CPU Microcode Update Revision */ >+#define PECI_PKG_ID_MCA_ERROR_LOG 0x0005 /* Machine Check Status */ >+ > struct peci_request; > > /** >@@ -41,6 +49,11 @@ static inline struct peci_controller *to_peci_controller(void *d) > * struct peci_device - PECI device > * @dev: device object to register PECI device to the device model > * @controller: manages the bus segment hosting this PECI device >+ * @info: PECI device characteristics >+ * @info.family: device family >+ * @info.model: device model >+ * @info.peci_revision: PECI revision supported by the PECI device >+ * @info.socket_id: the socket ID represented by the PECI device > * @addr: address used on the PECI bus connected to the parent controller > * > * A peci_device identifies a single device (i.e. CPU) connected to a PECI bus. >@@ -50,6 +63,12 @@ static inline struct peci_controller *to_peci_controller(void *d) > struct peci_device { > struct device dev; > struct peci_controller *controller; >+ struct { >+ u16 family; >+ u8 model; >+ u8 peci_revision; This field gets set but doesn't seem to end up used anywhere; is it useful? >+ u8 socket_id; >+ } info; > u8 addr; > }; > >diff --git a/lib/Kconfig b/lib/Kconfig >index cc28bc1f2d84..a74e6c0fa75c 100644 >--- a/lib/Kconfig >+++ b/lib/Kconfig >@@ -721,5 +721,5 @@ config ASN1_ENCODER > > config GENERIC_LIB_X86 > bool >- depends on X86 >+ depends on X86 || PECI > default n >-- >2.31.1 >
On 7/27/21 1:10 PM, Zev Weiss wrote: > On Mon, Jul 12, 2021 at 05:04:42PM CDT, Iwona Winiarska wrote: >> Here we're adding support for PECI device drivers, which unlike PECI >> controller drivers are actually able to provide functionalities to >> userspace. >> >> We're also extending peci_request API to allow querying more details >> about PECI device (e.g. model/family), that's going to be used to find >> a compatible peci_driver. >> >> Signed-off-by: Iwona Winiarska <iwona.winiarska@intel.com> >> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> >> --- >> drivers/peci/Kconfig | 1 + >> drivers/peci/core.c | 49 +++++++++ >> drivers/peci/device.c | 99 ++++++++++++++++++ >> drivers/peci/internal.h | 75 ++++++++++++++ >> drivers/peci/request.c | 217 ++++++++++++++++++++++++++++++++++++++++ >> include/linux/peci.h | 19 ++++ >> lib/Kconfig | 2 +- >> 7 files changed, 461 insertions(+), 1 deletion(-) >> >> diff --git a/drivers/peci/Kconfig b/drivers/peci/Kconfig >> index 0d0ee8009713..27c31535843c 100644 >> --- a/drivers/peci/Kconfig >> +++ b/drivers/peci/Kconfig >> @@ -2,6 +2,7 @@ >> >> menuconfig PECI >> tristate "PECI support" >> + select GENERIC_LIB_X86 >> help >> The Platform Environment Control Interface (PECI) is an interface >> that provides a communication channel to Intel processors and >> diff --git a/drivers/peci/core.c b/drivers/peci/core.c >> index ae7a9572cdf3..94426b7f2618 100644 >> --- a/drivers/peci/core.c >> +++ b/drivers/peci/core.c >> @@ -143,8 +143,57 @@ void peci_controller_remove(struct peci_controller *controller) >> } >> EXPORT_SYMBOL_NS_GPL(peci_controller_remove, PECI); >> >> +static const struct peci_device_id * >> +peci_bus_match_device_id(const struct peci_device_id *id, struct peci_device *device) >> +{ >> + while (id->family != 0) { >> + if (id->family == device->info.family && >> + id->model == device->info.model) >> + return id; >> + id++; >> + } >> + >> + return NULL; >> +} >> + >> +static int peci_bus_device_match(struct device *dev, struct device_driver *drv) >> +{ >> + struct peci_device *device = to_peci_device(dev); >> + struct peci_driver *peci_drv = to_peci_driver(drv); >> + >> + if (dev->type != &peci_device_type) >> + return 0; >> + >> + if (peci_bus_match_device_id(peci_drv->id_table, device)) >> + return 1; >> + >> + return 0; >> +} >> + >> +static int peci_bus_device_probe(struct device *dev) >> +{ >> + struct peci_device *device = to_peci_device(dev); >> + struct peci_driver *driver = to_peci_driver(dev->driver); >> + >> + return driver->probe(device, peci_bus_match_device_id(driver->id_table, device)); >> +} >> + >> +static int peci_bus_device_remove(struct device *dev) >> +{ >> + struct peci_device *device = to_peci_device(dev); >> + struct peci_driver *driver = to_peci_driver(dev->driver); >> + >> + if (driver->remove) >> + driver->remove(device); >> + >> + return 0; >> +} >> + >> struct bus_type peci_bus_type = { >> .name = "peci", >> + .match = peci_bus_device_match, >> + .probe = peci_bus_device_probe, >> + .remove = peci_bus_device_remove, >> .bus_groups = peci_bus_groups, >> }; >> >> diff --git a/drivers/peci/device.c b/drivers/peci/device.c >> index 1124862211e2..8c4bd1ebbc29 100644 >> --- a/drivers/peci/device.c >> +++ b/drivers/peci/device.c >> @@ -1,11 +1,79 @@ >> // SPDX-License-Identifier: GPL-2.0-only >> // Copyright (c) 2018-2021 Intel Corporation >> >> +#include <linux/bitfield.h> >> #include <linux/peci.h> >> #include <linux/slab.h> >> +#include <linux/x86/cpu.h> >> >> #include "internal.h" >> >> +#define REVISION_NUM_MASK GENMASK(15, 8) >> +static int peci_get_revision(struct peci_device *device, u8 *revision) >> +{ >> + struct peci_request *req; >> + u64 dib; >> + >> + req = peci_get_dib(device); >> + if (IS_ERR(req)) >> + return PTR_ERR(req); >> + >> + dib = peci_request_data_dib(req); >> + if (dib == 0) { >> + peci_request_free(req); >> + return -EIO; > > Any particular reason to check for zero specifically here? It looks > like that would be a case where the host CPU responds and everything's > otherwise fine, but the host just happened to send back a bunch of zeros > for whatever reason -- which may not be a valid PECI revision number, > but if it sent back a bunch of 0xff bytes instead wouldn't that be > equally invalid? > > Also, given that the docs (the ones I have, at least) describe the DIB > as a collection of individual bytes, dealing with it as a combined u64 > seems a bit confusing to me -- could we just return req->rx.buf[1] > instead? > >> + } >> + >> + *revision = FIELD_GET(REVISION_NUM_MASK, dib); >> + >> + peci_request_free(req); >> + >> + return 0; >> +} >> + >> +static int peci_get_cpu_id(struct peci_device *device, u32 *cpu_id) >> +{ >> + struct peci_request *req; >> + int ret; >> + >> + req = peci_pkg_cfg_readl(device, PECI_PCS_PKG_ID, PECI_PKG_ID_CPU_ID); >> + if (IS_ERR(req)) >> + return PTR_ERR(req); >> + >> + ret = peci_request_status(req); >> + if (ret) >> + goto out_req_free; >> + >> + *cpu_id = peci_request_data_readl(req); >> +out_req_free: > > As suggested on patch #8, I think it might be cleaner to stack-allocate > struct peci_request, which would obviate the need for explicit free > calls in functions like this and hence might simplify it away entirely, > but if this does remain like this we could just do > > if (!ret) > *cpu_id = peci_request_data_readl(req); > > instead of using a goto to skip a single line. > As a maintainer I would ask submitters to follow Documentation/process/coding-style.rst, chapter 7. Guenter >> + peci_request_free(req); >> + >> + return ret; >> +} >> + >> +static int peci_device_info_init(struct peci_device *device) >> +{ >> + u8 revision; >> + u32 cpu_id; >> + int ret; >> + >> + ret = peci_get_cpu_id(device, &cpu_id); >> + if (ret) >> + return ret; >> + >> + device->info.family = x86_family(cpu_id); >> + device->info.model = x86_model(cpu_id); >> + >> + ret = peci_get_revision(device, &revision); >> + if (ret) >> + return ret; >> + device->info.peci_revision = revision; >> + >> + device->info.socket_id = device->addr - PECI_BASE_ADDR; >> + >> + return 0; >> +} >> + >> static int peci_detect(struct peci_controller *controller, u8 addr) >> { >> struct peci_request *req; >> @@ -75,6 +143,10 @@ int peci_device_create(struct peci_controller *controller, u8 addr) >> device->dev.bus = &peci_bus_type; >> device->dev.type = &peci_device_type; >> >> + ret = peci_device_info_init(device); >> + if (ret) >> + goto err_free; >> + >> ret = dev_set_name(&device->dev, "%d-%02x", controller->id, device->addr); >> if (ret) >> goto err_free; >> @@ -98,6 +170,33 @@ void peci_device_destroy(struct peci_device *device) >> device_unregister(&device->dev); >> } >> >> +int __peci_driver_register(struct peci_driver *driver, struct module *owner, >> + const char *mod_name) >> +{ >> + driver->driver.bus = &peci_bus_type; >> + driver->driver.owner = owner; >> + driver->driver.mod_name = mod_name; >> + >> + if (!driver->probe) { >> + pr_err("peci: trying to register driver without probe callback\n"); >> + return -EINVAL; >> + } >> + >> + if (!driver->id_table) { >> + pr_err("peci: trying to register driver without device id table\n"); >> + return -EINVAL; >> + } >> + >> + return driver_register(&driver->driver); >> +} >> +EXPORT_SYMBOL_NS_GPL(__peci_driver_register, PECI); >> + >> +void peci_driver_unregister(struct peci_driver *driver) >> +{ >> + driver_unregister(&driver->driver); >> +} >> +EXPORT_SYMBOL_NS_GPL(peci_driver_unregister, PECI); >> + >> static void peci_device_release(struct device *dev) >> { >> struct peci_device *device = to_peci_device(dev); >> diff --git a/drivers/peci/internal.h b/drivers/peci/internal.h >> index 6b139adaf6b8..c891c93e077a 100644 >> --- a/drivers/peci/internal.h >> +++ b/drivers/peci/internal.h >> @@ -19,6 +19,34 @@ struct peci_request; >> struct peci_request *peci_request_alloc(struct peci_device *device, u8 tx_len, u8 rx_len); >> void peci_request_free(struct peci_request *req); >> >> +int peci_request_status(struct peci_request *req); >> +u64 peci_request_data_dib(struct peci_request *req); >> + >> +u8 peci_request_data_readb(struct peci_request *req); >> +u16 peci_request_data_readw(struct peci_request *req); >> +u32 peci_request_data_readl(struct peci_request *req); >> +u64 peci_request_data_readq(struct peci_request *req); >> + >> +struct peci_request *peci_get_dib(struct peci_device *device); >> +struct peci_request *peci_get_temp(struct peci_device *device); >> + >> +struct peci_request *peci_pkg_cfg_readb(struct peci_device *device, u8 index, u16 param); >> +struct peci_request *peci_pkg_cfg_readw(struct peci_device *device, u8 index, u16 param); >> +struct peci_request *peci_pkg_cfg_readl(struct peci_device *device, u8 index, u16 param); >> +struct peci_request *peci_pkg_cfg_readq(struct peci_device *device, u8 index, u16 param); >> + >> +/** >> + * struct peci_device_id - PECI device data to match >> + * @data: pointer to driver private data specific to device >> + * @family: device family >> + * @model: device model >> + */ >> +struct peci_device_id { >> + const void *data; >> + u16 family; >> + u8 model; >> +}; >> + >> extern struct device_type peci_device_type; >> extern const struct attribute_group *peci_device_groups[]; >> >> @@ -28,6 +56,53 @@ void peci_device_destroy(struct peci_device *device); >> extern struct bus_type peci_bus_type; >> extern const struct attribute_group *peci_bus_groups[]; >> >> +/** >> + * struct peci_driver - PECI driver >> + * @driver: inherit device driver >> + * @probe: probe callback >> + * @remove: remove callback >> + * @id_table: PECI device match table to decide which device to bind >> + */ >> +struct peci_driver { >> + struct device_driver driver; >> + int (*probe)(struct peci_device *device, const struct peci_device_id *id); >> + void (*remove)(struct peci_device *device); >> + const struct peci_device_id *id_table; >> +}; >> + >> +static inline struct peci_driver *to_peci_driver(struct device_driver *d) >> +{ >> + return container_of(d, struct peci_driver, driver); >> +} >> + >> +int __peci_driver_register(struct peci_driver *driver, struct module *owner, >> + const char *mod_name); >> +/** >> + * peci_driver_register() - register PECI driver >> + * @driver: the driver to be registered >> + * @owner: owner module of the driver being registered >> + * @mod_name: module name string >> + * >> + * PECI drivers that don't need to do anything special in module init should >> + * use the convenience "module_peci_driver" macro instead >> + * >> + * Return: zero on success, else a negative error code. >> + */ >> +#define peci_driver_register(driver) \ >> + __peci_driver_register(driver, THIS_MODULE, KBUILD_MODNAME) >> +void peci_driver_unregister(struct peci_driver *driver); >> + >> +/** >> + * module_peci_driver() - Helper macro for registering a modular PECI driver >> + * @__peci_driver: peci_driver struct >> + * >> + * Helper macro for PECI drivers which do not do anything special in module >> + * init/exit. This eliminates a lot of boilerplate. Each module may only >> + * use this macro once, and calling it replaces module_init() and module_exit() >> + */ >> +#define module_peci_driver(__peci_driver) \ >> + module_driver(__peci_driver, peci_driver_register, peci_driver_unregister) >> + >> extern struct device_type peci_controller_type; >> >> int peci_controller_scan_devices(struct peci_controller *controller); >> diff --git a/drivers/peci/request.c b/drivers/peci/request.c >> index 78cee51dfae1..48354455b554 100644 >> --- a/drivers/peci/request.c >> +++ b/drivers/peci/request.c >> @@ -1,13 +1,142 @@ >> // SPDX-License-Identifier: GPL-2.0-only >> // Copyright (c) 2021 Intel Corporation >> >> +#include <linux/bug.h> >> #include <linux/export.h> >> #include <linux/peci.h> >> #include <linux/slab.h> >> #include <linux/types.h> >> >> +#include <asm/unaligned.h> >> + >> #include "internal.h" >> >> +#define PECI_GET_DIB_CMD 0xf7 >> +#define PECI_GET_DIB_WR_LEN 1 >> +#define PECI_GET_DIB_RD_LEN 8 >> + >> +#define PECI_RDPKGCFG_CMD 0xa1 >> +#define PECI_RDPKGCFG_WRITE_LEN 5 >> +#define PECI_RDPKGCFG_READ_LEN_BASE 1 >> +#define PECI_WRPKGCFG_CMD 0xa5 >> +#define PECI_WRPKGCFG_WRITE_LEN_BASE 6 >> +#define PECI_WRPKGCFG_READ_LEN 1 >> + >> +/* Device Specific Completion Code (CC) Definition */ >> +#define PECI_CC_SUCCESS 0x40 >> +#define PECI_CC_NEED_RETRY 0x80 >> +#define PECI_CC_OUT_OF_RESOURCE 0x81 >> +#define PECI_CC_UNAVAIL_RESOURCE 0x82 >> +#define PECI_CC_INVALID_REQ 0x90 >> +#define PECI_CC_MCA_ERROR 0x91 >> +#define PECI_CC_CATASTROPHIC_MCA_ERROR 0x93 >> +#define PECI_CC_FATAL_MCA_ERROR 0x94 >> +#define PECI_CC_PARITY_ERR_GPSB_OR_PMSB 0x98 >> +#define PECI_CC_PARITY_ERR_GPSB_OR_PMSB_IERR 0x9B >> +#define PECI_CC_PARITY_ERR_GPSB_OR_PMSB_MCA 0x9C >> + >> +#define PECI_RETRY_BIT BIT(0) >> + >> +#define PECI_RETRY_TIMEOUT msecs_to_jiffies(700) >> +#define PECI_RETRY_INTERVAL_MIN msecs_to_jiffies(1) >> +#define PECI_RETRY_INTERVAL_MAX msecs_to_jiffies(128) >> + >> +static u8 peci_request_data_cc(struct peci_request *req) >> +{ >> + return req->rx.buf[0]; >> +} >> + >> +/** >> + * peci_request_status() - return -errno based on PECI completion code >> + * @req: the PECI request that contains response data with completion code >> + * >> + * It can't be used for Ping(), GetDIB() and GetTemp() - for those commands we >> + * don't expect completion code in the response. >> + * >> + * Return: -errno >> + */ >> +int peci_request_status(struct peci_request *req) >> +{ >> + u8 cc = peci_request_data_cc(req); >> + >> + if (cc != PECI_CC_SUCCESS) >> + dev_dbg(&req->device->dev, "ret: %#02x\n", cc); >> + >> + switch (cc) { >> + case PECI_CC_SUCCESS: >> + return 0; >> + case PECI_CC_NEED_RETRY: >> + case PECI_CC_OUT_OF_RESOURCE: >> + case PECI_CC_UNAVAIL_RESOURCE: >> + return -EAGAIN; >> + case PECI_CC_INVALID_REQ: >> + return -EINVAL; >> + case PECI_CC_MCA_ERROR: >> + case PECI_CC_CATASTROPHIC_MCA_ERROR: >> + case PECI_CC_FATAL_MCA_ERROR: >> + case PECI_CC_PARITY_ERR_GPSB_OR_PMSB: >> + case PECI_CC_PARITY_ERR_GPSB_OR_PMSB_IERR: >> + case PECI_CC_PARITY_ERR_GPSB_OR_PMSB_MCA: >> + return -EIO; >> + } >> + >> + WARN_ONCE(1, "Unknown PECI completion code: %#02x\n", cc); >> + >> + return -EIO; >> +} >> +EXPORT_SYMBOL_NS_GPL(peci_request_status, PECI); >> + >> +static int peci_request_xfer(struct peci_request *req) >> +{ >> + struct peci_device *device = req->device; >> + struct peci_controller *controller = device->controller; >> + int ret; >> + >> + mutex_lock(&controller->bus_lock); >> + ret = controller->xfer(controller, device->addr, req); >> + mutex_unlock(&controller->bus_lock); >> + >> + return ret; >> +} >> + >> +static int peci_request_xfer_retry(struct peci_request *req) >> +{ >> + long wait_interval = PECI_RETRY_INTERVAL_MIN; >> + struct peci_device *device = req->device; >> + struct peci_controller *controller = device->controller; >> + unsigned long start = jiffies; >> + int ret; >> + >> + /* Don't try to use it for ping */ >> + if (WARN_ON(!req->rx.buf)) >> + return 0; >> + >> + do { >> + ret = peci_request_xfer(req); >> + if (ret) { >> + dev_dbg(&controller->dev, "xfer error: %d\n", ret); >> + return ret; >> + } >> + >> + if (peci_request_status(req) != -EAGAIN) >> + return 0; >> + >> + /* Set the retry bit to indicate a retry attempt */ >> + req->tx.buf[1] |= PECI_RETRY_BIT; >> + >> + if (schedule_timeout_interruptible(wait_interval)) >> + return -ERESTARTSYS; >> + >> + wait_interval *= 2; >> + if (wait_interval > PECI_RETRY_INTERVAL_MAX) >> + wait_interval = PECI_RETRY_INTERVAL_MAX; > > wait_interval = min(wait_interval * 2, PECI_RETRY_INTERVAL_MAX) ? > >> + } while (time_before(jiffies, start + PECI_RETRY_TIMEOUT)); >> + >> + dev_dbg(&controller->dev, "request timed out\n"); >> + >> + return -ETIMEDOUT; >> +} >> + >> /** >> * peci_request_alloc() - allocate &struct peci_request with buffers with given lengths >> * @device: PECI device to which request is going to be sent >> @@ -72,3 +201,91 @@ void peci_request_free(struct peci_request *req) >> kfree(req); >> } >> EXPORT_SYMBOL_NS_GPL(peci_request_free, PECI); >> + >> +struct peci_request *peci_get_dib(struct peci_device *device) >> +{ >> + struct peci_request *req; >> + int ret; >> + >> + req = peci_request_alloc(device, PECI_GET_DIB_WR_LEN, PECI_GET_DIB_RD_LEN); >> + if (!req) >> + return ERR_PTR(-ENOMEM); >> + >> + req->tx.buf[0] = PECI_GET_DIB_CMD; >> + >> + ret = peci_request_xfer(req); >> + if (ret) { >> + peci_request_free(req); >> + return ERR_PTR(ret); >> + } >> + >> + return req; >> +} >> +EXPORT_SYMBOL_NS_GPL(peci_get_dib, PECI); >> + >> +static struct peci_request * >> +__pkg_cfg_read(struct peci_device *device, u8 index, u16 param, u8 len) >> +{ >> + struct peci_request *req; >> + int ret; >> + >> + req = peci_request_alloc(device, PECI_RDPKGCFG_WRITE_LEN, >> + PECI_RDPKGCFG_READ_LEN_BASE + len); >> + if (!req) >> + return ERR_PTR(-ENOMEM); >> + >> + req->tx.buf[0] = PECI_RDPKGCFG_CMD; >> + req->tx.buf[1] = 0; >> + req->tx.buf[2] = index; >> + put_unaligned_le16(param, &req->tx.buf[3]); >> + >> + ret = peci_request_xfer_retry(req); >> + if (ret) { >> + peci_request_free(req); >> + return ERR_PTR(ret); >> + } >> + >> + return req; >> +} >> + >> +u8 peci_request_data_readb(struct peci_request *req) >> +{ >> + return req->rx.buf[1]; >> +} >> +EXPORT_SYMBOL_NS_GPL(peci_request_data_readb, PECI); >> + >> +u16 peci_request_data_readw(struct peci_request *req) >> +{ >> + return get_unaligned_le16(&req->rx.buf[1]); >> +} >> +EXPORT_SYMBOL_NS_GPL(peci_request_data_readw, PECI); >> + >> +u32 peci_request_data_readl(struct peci_request *req) >> +{ >> + return get_unaligned_le32(&req->rx.buf[1]); >> +} >> +EXPORT_SYMBOL_NS_GPL(peci_request_data_readl, PECI); >> + >> +u64 peci_request_data_readq(struct peci_request *req) >> +{ >> + return get_unaligned_le64(&req->rx.buf[1]); >> +} >> +EXPORT_SYMBOL_NS_GPL(peci_request_data_readq, PECI); >> + >> +u64 peci_request_data_dib(struct peci_request *req) >> +{ >> + return get_unaligned_le64(&req->rx.buf[0]); >> +} >> +EXPORT_SYMBOL_NS_GPL(peci_request_data_dib, PECI); >> + >> +#define __read_pkg_config(x, type) \ >> +struct peci_request *peci_pkg_cfg_##x(struct peci_device *device, u8 index, u16 param) \ >> +{ \ >> + return __pkg_cfg_read(device, index, param, sizeof(type)); \ >> +} \ > > Is there a reason for this particular API? I'd think a more natural one > that would offload a bit of boilerplate from callers would look more like > > int peci_pkg_cfg_##x(struct peci_device *device, u8 index, u16 param, type *outp), > > returning peci_request_status() and writing the requested data to *outp > if that status is zero. > >> +EXPORT_SYMBOL_NS_GPL(peci_pkg_cfg_##x, PECI) >> + >> +__read_pkg_config(readb, u8); >> +__read_pkg_config(readw, u16); >> +__read_pkg_config(readl, u32); >> +__read_pkg_config(readq, u64); >> diff --git a/include/linux/peci.h b/include/linux/peci.h >> index cdf3008321fd..f9f37b874011 100644 >> --- a/include/linux/peci.h >> +++ b/include/linux/peci.h >> @@ -9,6 +9,14 @@ >> #include <linux/mutex.h> >> #include <linux/types.h> >> >> +#define PECI_PCS_PKG_ID 0 /* Package Identifier Read */ >> +#define PECI_PKG_ID_CPU_ID 0x0000 /* CPUID Info */ >> +#define PECI_PKG_ID_PLATFORM_ID 0x0001 /* Platform ID */ >> +#define PECI_PKG_ID_DEVICE_ID 0x0002 /* Uncore Device ID */ >> +#define PECI_PKG_ID_MAX_THREAD_ID 0x0003 /* Max Thread ID */ >> +#define PECI_PKG_ID_MICROCODE_REV 0x0004 /* CPU Microcode Update Revision */ >> +#define PECI_PKG_ID_MCA_ERROR_LOG 0x0005 /* Machine Check Status */ >> + >> struct peci_request; >> >> /** >> @@ -41,6 +49,11 @@ static inline struct peci_controller *to_peci_controller(void *d) >> * struct peci_device - PECI device >> * @dev: device object to register PECI device to the device model >> * @controller: manages the bus segment hosting this PECI device >> + * @info: PECI device characteristics >> + * @info.family: device family >> + * @info.model: device model >> + * @info.peci_revision: PECI revision supported by the PECI device >> + * @info.socket_id: the socket ID represented by the PECI device >> * @addr: address used on the PECI bus connected to the parent controller >> * >> * A peci_device identifies a single device (i.e. CPU) connected to a PECI bus. >> @@ -50,6 +63,12 @@ static inline struct peci_controller *to_peci_controller(void *d) >> struct peci_device { >> struct device dev; >> struct peci_controller *controller; >> + struct { >> + u16 family; >> + u8 model; >> + u8 peci_revision; > > This field gets set but doesn't seem to end up used anywhere; is it > useful? > >> + u8 socket_id; >> + } info; >> u8 addr; >> }; >> >> diff --git a/lib/Kconfig b/lib/Kconfig >> index cc28bc1f2d84..a74e6c0fa75c 100644 >> --- a/lib/Kconfig >> +++ b/lib/Kconfig >> @@ -721,5 +721,5 @@ config ASN1_ENCODER >> >> config GENERIC_LIB_X86 >> bool >> - depends on X86 >> + depends on X86 || PECI >> default n >> -- >> 2.31.1 >> >
On Tue, 2021-07-27 at 20:10 +0000, Zev Weiss wrote: > On Mon, Jul 12, 2021 at 05:04:42PM CDT, Iwona Winiarska wrote: > > Here we're adding support for PECI device drivers, which unlike PECI > > controller drivers are actually able to provide functionalities to > > userspace. > > > > We're also extending peci_request API to allow querying more details > > about PECI device (e.g. model/family), that's going to be used to find > > a compatible peci_driver. > > > > Signed-off-by: Iwona Winiarska <iwona.winiarska@intel.com> > > Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> > > --- > > drivers/peci/Kconfig | 1 + > > drivers/peci/core.c | 49 +++++++++ > > drivers/peci/device.c | 99 ++++++++++++++++++ > > drivers/peci/internal.h | 75 ++++++++++++++ > > drivers/peci/request.c | 217 ++++++++++++++++++++++++++++++++++++++++ > > include/linux/peci.h | 19 ++++ > > lib/Kconfig | 2 +- > > 7 files changed, 461 insertions(+), 1 deletion(-) > > > > diff --git a/drivers/peci/Kconfig b/drivers/peci/Kconfig > > index 0d0ee8009713..27c31535843c 100644 > > --- a/drivers/peci/Kconfig > > +++ b/drivers/peci/Kconfig > > @@ -2,6 +2,7 @@ > > > > menuconfig PECI > > tristate "PECI support" > > + select GENERIC_LIB_X86 > > help > > The Platform Environment Control Interface (PECI) is an interface > > that provides a communication channel to Intel processors and > > diff --git a/drivers/peci/core.c b/drivers/peci/core.c > > index ae7a9572cdf3..94426b7f2618 100644 > > --- a/drivers/peci/core.c > > +++ b/drivers/peci/core.c > > @@ -143,8 +143,57 @@ void peci_controller_remove(struct peci_controller > > *controller) > > } > > EXPORT_SYMBOL_NS_GPL(peci_controller_remove, PECI); > > > > +static const struct peci_device_id * > > +peci_bus_match_device_id(const struct peci_device_id *id, struct > > peci_device *device) > > +{ > > + while (id->family != 0) { > > + if (id->family == device->info.family && > > + id->model == device->info.model) > > + return id; > > + id++; > > + } > > + > > + return NULL; > > +} > > + > > +static int peci_bus_device_match(struct device *dev, struct device_driver > > *drv) > > +{ > > + struct peci_device *device = to_peci_device(dev); > > + struct peci_driver *peci_drv = to_peci_driver(drv); > > + > > + if (dev->type != &peci_device_type) > > + return 0; > > + > > + if (peci_bus_match_device_id(peci_drv->id_table, device)) > > + return 1; > > + > > + return 0; > > +} > > + > > +static int peci_bus_device_probe(struct device *dev) > > +{ > > + struct peci_device *device = to_peci_device(dev); > > + struct peci_driver *driver = to_peci_driver(dev->driver); > > + > > + return driver->probe(device, peci_bus_match_device_id(driver- > > >id_table, device)); > > +} > > + > > +static int peci_bus_device_remove(struct device *dev) > > +{ > > + struct peci_device *device = to_peci_device(dev); > > + struct peci_driver *driver = to_peci_driver(dev->driver); > > + > > + if (driver->remove) > > + driver->remove(device); > > + > > + return 0; > > +} > > + > > struct bus_type peci_bus_type = { > > .name = "peci", > > + .match = peci_bus_device_match, > > + .probe = peci_bus_device_probe, > > + .remove = peci_bus_device_remove, > > .bus_groups = peci_bus_groups, > > }; > > > > diff --git a/drivers/peci/device.c b/drivers/peci/device.c > > index 1124862211e2..8c4bd1ebbc29 100644 > > --- a/drivers/peci/device.c > > +++ b/drivers/peci/device.c > > @@ -1,11 +1,79 @@ > > // SPDX-License-Identifier: GPL-2.0-only > > // Copyright (c) 2018-2021 Intel Corporation > > > > +#include <linux/bitfield.h> > > #include <linux/peci.h> > > #include <linux/slab.h> > > +#include <linux/x86/cpu.h> > > > > #include "internal.h" > > > > +#define REVISION_NUM_MASK GENMASK(15, 8) > > +static int peci_get_revision(struct peci_device *device, u8 *revision) > > +{ > > + struct peci_request *req; > > + u64 dib; > > + > > + req = peci_get_dib(device); > > + if (IS_ERR(req)) > > + return PTR_ERR(req); > > + > > + dib = peci_request_data_dib(req); > > + if (dib == 0) { > > + peci_request_free(req); > > + return -EIO; > > Any particular reason to check for zero specifically here? It looks > like that would be a case where the host CPU responds and everything's > otherwise fine, but the host just happened to send back a bunch of zeros > for whatever reason -- which may not be a valid PECI revision number, > but if it sent back a bunch of 0xff bytes instead wouldn't that be > equally invalid? The response with all 0's is possible (and defined) in certain device states. If that happens - we don't want to continue adding the device (with "invalid" revision 0), we just want to return error. > > Also, given that the docs (the ones I have, at least) describe the DIB > as a collection of individual bytes, dealing with it as a combined u64 > seems a bit confusing to me -- could we just return req->rx.buf[1] > instead? GetDIB returns 8-byte response, which is why we're treating it in this way (similar to other commands). We're pulling out the whole response and use FIELD_GET to obtain the data we need. > > > + } > > + > > + *revision = FIELD_GET(REVISION_NUM_MASK, dib); > > + > > + peci_request_free(req); > > + > > + return 0; > > +} > > + > > +static int peci_get_cpu_id(struct peci_device *device, u32 *cpu_id) > > +{ > > + struct peci_request *req; > > + int ret; > > + > > + req = peci_pkg_cfg_readl(device, PECI_PCS_PKG_ID, > > PECI_PKG_ID_CPU_ID); > > + if (IS_ERR(req)) > > + return PTR_ERR(req); > > + > > + ret = peci_request_status(req); > > + if (ret) > > + goto out_req_free; > > + > > + *cpu_id = peci_request_data_readl(req); > > +out_req_free: > > As suggested on patch #8, I think it might be cleaner to stack-allocate > struct peci_request, which would obviate the need for explicit free > calls in functions like this and hence might simplify it away entirely, > but if this does remain like this we could just do > > if (!ret) > *cpu_id = peci_request_data_readl(req); > > instead of using a goto to skip a single line. Please, see my response on patch 8. I would prefer to operate on allocated objects rather than on local variables in case of peci requests. > > > + peci_request_free(req); > > + > > + return ret; > > +} > > + > > +static int peci_device_info_init(struct peci_device *device) > > +{ > > + u8 revision; > > + u32 cpu_id; > > + int ret; > > + > > + ret = peci_get_cpu_id(device, &cpu_id); > > + if (ret) > > + return ret; > > + > > + device->info.family = x86_family(cpu_id); > > + device->info.model = x86_model(cpu_id); > > + > > + ret = peci_get_revision(device, &revision); > > + if (ret) > > + return ret; > > + device->info.peci_revision = revision; > > + > > + device->info.socket_id = device->addr - PECI_BASE_ADDR; > > + > > + return 0; > > +} > > + > > static int peci_detect(struct peci_controller *controller, u8 addr) > > { > > struct peci_request *req; > > @@ -75,6 +143,10 @@ int peci_device_create(struct peci_controller > > *controller, u8 addr) > > device->dev.bus = &peci_bus_type; > > device->dev.type = &peci_device_type; > > > > + ret = peci_device_info_init(device); > > + if (ret) > > + goto err_free; > > + > > ret = dev_set_name(&device->dev, "%d-%02x", controller->id, device- > > >addr); > > if (ret) > > goto err_free; > > @@ -98,6 +170,33 @@ void peci_device_destroy(struct peci_device *device) > > device_unregister(&device->dev); > > } > > > > +int __peci_driver_register(struct peci_driver *driver, struct module > > *owner, > > + const char *mod_name) > > +{ > > + driver->driver.bus = &peci_bus_type; > > + driver->driver.owner = owner; > > + driver->driver.mod_name = mod_name; > > + > > + if (!driver->probe) { > > + pr_err("peci: trying to register driver without probe > > callback\n"); > > + return -EINVAL; > > + } > > + > > + if (!driver->id_table) { > > + pr_err("peci: trying to register driver without device id > > table\n"); > > + return -EINVAL; > > + } > > + > > + return driver_register(&driver->driver); > > +} > > +EXPORT_SYMBOL_NS_GPL(__peci_driver_register, PECI); > > + > > +void peci_driver_unregister(struct peci_driver *driver) > > +{ > > + driver_unregister(&driver->driver); > > +} > > +EXPORT_SYMBOL_NS_GPL(peci_driver_unregister, PECI); > > + > > static void peci_device_release(struct device *dev) > > { > > struct peci_device *device = to_peci_device(dev); > > diff --git a/drivers/peci/internal.h b/drivers/peci/internal.h > > index 6b139adaf6b8..c891c93e077a 100644 > > --- a/drivers/peci/internal.h > > +++ b/drivers/peci/internal.h > > @@ -19,6 +19,34 @@ struct peci_request; > > struct peci_request *peci_request_alloc(struct peci_device *device, u8 > > tx_len, u8 rx_len); > > void peci_request_free(struct peci_request *req); > > > > +int peci_request_status(struct peci_request *req); > > +u64 peci_request_data_dib(struct peci_request *req); > > + > > +u8 peci_request_data_readb(struct peci_request *req); > > +u16 peci_request_data_readw(struct peci_request *req); > > +u32 peci_request_data_readl(struct peci_request *req); > > +u64 peci_request_data_readq(struct peci_request *req); > > + > > +struct peci_request *peci_get_dib(struct peci_device *device); > > +struct peci_request *peci_get_temp(struct peci_device *device); > > + > > +struct peci_request *peci_pkg_cfg_readb(struct peci_device *device, u8 > > index, u16 param); > > +struct peci_request *peci_pkg_cfg_readw(struct peci_device *device, u8 > > index, u16 param); > > +struct peci_request *peci_pkg_cfg_readl(struct peci_device *device, u8 > > index, u16 param); > > +struct peci_request *peci_pkg_cfg_readq(struct peci_device *device, u8 > > index, u16 param); > > + > > +/** > > + * struct peci_device_id - PECI device data to match > > + * @data: pointer to driver private data specific to device > > + * @family: device family > > + * @model: device model > > + */ > > +struct peci_device_id { > > + const void *data; > > + u16 family; > > + u8 model; > > +}; > > + > > extern struct device_type peci_device_type; > > extern const struct attribute_group *peci_device_groups[]; > > > > @@ -28,6 +56,53 @@ void peci_device_destroy(struct peci_device *device); > > extern struct bus_type peci_bus_type; > > extern const struct attribute_group *peci_bus_groups[]; > > > > +/** > > + * struct peci_driver - PECI driver > > + * @driver: inherit device driver > > + * @probe: probe callback > > + * @remove: remove callback > > + * @id_table: PECI device match table to decide which device to bind > > + */ > > +struct peci_driver { > > + struct device_driver driver; > > + int (*probe)(struct peci_device *device, const struct peci_device_id > > *id); > > + void (*remove)(struct peci_device *device); > > + const struct peci_device_id *id_table; > > +}; > > + > > +static inline struct peci_driver *to_peci_driver(struct device_driver *d) > > +{ > > + return container_of(d, struct peci_driver, driver); > > +} > > + > > +int __peci_driver_register(struct peci_driver *driver, struct module > > *owner, > > + const char *mod_name); > > +/** > > + * peci_driver_register() - register PECI driver > > + * @driver: the driver to be registered > > + * @owner: owner module of the driver being registered > > + * @mod_name: module name string > > + * > > + * PECI drivers that don't need to do anything special in module init > > should > > + * use the convenience "module_peci_driver" macro instead > > + * > > + * Return: zero on success, else a negative error code. > > + */ > > +#define peci_driver_register(driver) \ > > + __peci_driver_register(driver, THIS_MODULE, KBUILD_MODNAME) > > +void peci_driver_unregister(struct peci_driver *driver); > > + > > +/** > > + * module_peci_driver() - Helper macro for registering a modular PECI > > driver > > + * @__peci_driver: peci_driver struct > > + * > > + * Helper macro for PECI drivers which do not do anything special in module > > + * init/exit. This eliminates a lot of boilerplate. Each module may only > > + * use this macro once, and calling it replaces module_init() and > > module_exit() > > + */ > > +#define module_peci_driver(__peci_driver) \ > > + module_driver(__peci_driver, peci_driver_register, > > peci_driver_unregister) > > + > > extern struct device_type peci_controller_type; > > > > int peci_controller_scan_devices(struct peci_controller *controller); > > diff --git a/drivers/peci/request.c b/drivers/peci/request.c > > index 78cee51dfae1..48354455b554 100644 > > --- a/drivers/peci/request.c > > +++ b/drivers/peci/request.c > > @@ -1,13 +1,142 @@ > > // SPDX-License-Identifier: GPL-2.0-only > > // Copyright (c) 2021 Intel Corporation > > > > +#include <linux/bug.h> > > #include <linux/export.h> > > #include <linux/peci.h> > > #include <linux/slab.h> > > #include <linux/types.h> > > > > +#include <asm/unaligned.h> > > + > > #include "internal.h" > > > > +#define PECI_GET_DIB_CMD 0xf7 > > +#define PECI_GET_DIB_WR_LEN 1 > > +#define PECI_GET_DIB_RD_LEN 8 > > + > > +#define PECI_RDPKGCFG_CMD 0xa1 > > +#define PECI_RDPKGCFG_WRITE_LEN 5 > > +#define PECI_RDPKGCFG_READ_LEN_BASE 1 > > +#define PECI_WRPKGCFG_CMD 0xa5 > > +#define PECI_WRPKGCFG_WRITE_LEN_BASE 6 > > +#define PECI_WRPKGCFG_READ_LEN 1 > > + > > +/* Device Specific Completion Code (CC) Definition */ > > +#define PECI_CC_SUCCESS 0x40 > > +#define PECI_CC_NEED_RETRY 0x80 > > +#define PECI_CC_OUT_OF_RESOURCE 0x81 > > +#define PECI_CC_UNAVAIL_RESOURCE 0x82 > > +#define PECI_CC_INVALID_REQ 0x90 > > +#define PECI_CC_MCA_ERROR 0x91 > > +#define PECI_CC_CATASTROPHIC_MCA_ERROR 0x93 > > +#define PECI_CC_FATAL_MCA_ERROR 0x94 > > +#define PECI_CC_PARITY_ERR_GPSB_OR_PMSB 0x98 > > +#define PECI_CC_PARITY_ERR_GPSB_OR_PMSB_IERR 0x9B > > +#define PECI_CC_PARITY_ERR_GPSB_OR_PMSB_MCA 0x9C > > + > > +#define PECI_RETRY_BIT BIT(0) > > + > > +#define PECI_RETRY_TIMEOUT msecs_to_jiffies(700) > > +#define PECI_RETRY_INTERVAL_MIN msecs_to_jiffies(1) > > +#define PECI_RETRY_INTERVAL_MAX msecs_to_jiffies(128) > > + > > +static u8 peci_request_data_cc(struct peci_request *req) > > +{ > > + return req->rx.buf[0]; > > +} > > + > > +/** > > + * peci_request_status() - return -errno based on PECI completion code > > + * @req: the PECI request that contains response data with completion code > > + * > > + * It can't be used for Ping(), GetDIB() and GetTemp() - for those commands > > we > > + * don't expect completion code in the response. > > + * > > + * Return: -errno > > + */ > > +int peci_request_status(struct peci_request *req) > > +{ > > + u8 cc = peci_request_data_cc(req); > > + > > + if (cc != PECI_CC_SUCCESS) > > + dev_dbg(&req->device->dev, "ret: %#02x\n", cc); > > + > > + switch (cc) { > > + case PECI_CC_SUCCESS: > > + return 0; > > + case PECI_CC_NEED_RETRY: > > + case PECI_CC_OUT_OF_RESOURCE: > > + case PECI_CC_UNAVAIL_RESOURCE: > > + return -EAGAIN; > > + case PECI_CC_INVALID_REQ: > > + return -EINVAL; > > + case PECI_CC_MCA_ERROR: > > + case PECI_CC_CATASTROPHIC_MCA_ERROR: > > + case PECI_CC_FATAL_MCA_ERROR: > > + case PECI_CC_PARITY_ERR_GPSB_OR_PMSB: > > + case PECI_CC_PARITY_ERR_GPSB_OR_PMSB_IERR: > > + case PECI_CC_PARITY_ERR_GPSB_OR_PMSB_MCA: > > + return -EIO; > > + } > > + > > + WARN_ONCE(1, "Unknown PECI completion code: %#02x\n", cc); > > + > > + return -EIO; > > +} > > +EXPORT_SYMBOL_NS_GPL(peci_request_status, PECI); > > + > > +static int peci_request_xfer(struct peci_request *req) > > +{ > > + struct peci_device *device = req->device; > > + struct peci_controller *controller = device->controller; > > + int ret; > > + > > + mutex_lock(&controller->bus_lock); > > + ret = controller->xfer(controller, device->addr, req); > > + mutex_unlock(&controller->bus_lock); > > + > > + return ret; > > +} > > + > > +static int peci_request_xfer_retry(struct peci_request *req) > > +{ > > + long wait_interval = PECI_RETRY_INTERVAL_MIN; > > + struct peci_device *device = req->device; > > + struct peci_controller *controller = device->controller; > > + unsigned long start = jiffies; > > + int ret; > > + > > + /* Don't try to use it for ping */ > > + if (WARN_ON(!req->rx.buf)) > > + return 0; > > + > > + do { > > + ret = peci_request_xfer(req); > > + if (ret) { > > + dev_dbg(&controller->dev, "xfer error: %d\n", ret); > > + return ret; > > + } > > + > > + if (peci_request_status(req) != -EAGAIN) > > + return 0; > > + > > + /* Set the retry bit to indicate a retry attempt */ > > + req->tx.buf[1] |= PECI_RETRY_BIT; > > + > > + if (schedule_timeout_interruptible(wait_interval)) > > + return -ERESTARTSYS; > > + > > + wait_interval *= 2; > > + if (wait_interval > PECI_RETRY_INTERVAL_MAX) > > + wait_interval = PECI_RETRY_INTERVAL_MAX; > > wait_interval = min(wait_interval * 2, PECI_RETRY_INTERVAL_MAX) ? Ack. > > > + } while (time_before(jiffies, start + PECI_RETRY_TIMEOUT)); > > + > > + dev_dbg(&controller->dev, "request timed out\n"); > > + > > + return -ETIMEDOUT; > > +} > > + > > /** > > * peci_request_alloc() - allocate &struct peci_request with buffers with > > given lengths > > * @device: PECI device to which request is going to be sent > > @@ -72,3 +201,91 @@ void peci_request_free(struct peci_request *req) > > kfree(req); > > } > > EXPORT_SYMBOL_NS_GPL(peci_request_free, PECI); > > + > > +struct peci_request *peci_get_dib(struct peci_device *device) > > +{ > > + struct peci_request *req; > > + int ret; > > + > > + req = peci_request_alloc(device, PECI_GET_DIB_WR_LEN, > > PECI_GET_DIB_RD_LEN); > > + if (!req) > > + return ERR_PTR(-ENOMEM); > > + > > + req->tx.buf[0] = PECI_GET_DIB_CMD; > > + > > + ret = peci_request_xfer(req); > > + if (ret) { > > + peci_request_free(req); > > + return ERR_PTR(ret); > > + } > > + > > + return req; > > +} > > +EXPORT_SYMBOL_NS_GPL(peci_get_dib, PECI); > > + > > +static struct peci_request * > > +__pkg_cfg_read(struct peci_device *device, u8 index, u16 param, u8 len) > > +{ > > + struct peci_request *req; > > + int ret; > > + > > + req = peci_request_alloc(device, PECI_RDPKGCFG_WRITE_LEN, > > + PECI_RDPKGCFG_READ_LEN_BASE + len); > > + if (!req) > > + return ERR_PTR(-ENOMEM); > > + > > + req->tx.buf[0] = PECI_RDPKGCFG_CMD; > > + req->tx.buf[1] = 0; > > + req->tx.buf[2] = index; > > + put_unaligned_le16(param, &req->tx.buf[3]); > > + > > + ret = peci_request_xfer_retry(req); > > + if (ret) { > > + peci_request_free(req); > > + return ERR_PTR(ret); > > + } > > + > > + return req; > > +} > > + > > +u8 peci_request_data_readb(struct peci_request *req) > > +{ > > + return req->rx.buf[1]; > > +} > > +EXPORT_SYMBOL_NS_GPL(peci_request_data_readb, PECI); > > + > > +u16 peci_request_data_readw(struct peci_request *req) > > +{ > > + return get_unaligned_le16(&req->rx.buf[1]); > > +} > > +EXPORT_SYMBOL_NS_GPL(peci_request_data_readw, PECI); > > + > > +u32 peci_request_data_readl(struct peci_request *req) > > +{ > > + return get_unaligned_le32(&req->rx.buf[1]); > > +} > > +EXPORT_SYMBOL_NS_GPL(peci_request_data_readl, PECI); > > + > > +u64 peci_request_data_readq(struct peci_request *req) > > +{ > > + return get_unaligned_le64(&req->rx.buf[1]); > > +} > > +EXPORT_SYMBOL_NS_GPL(peci_request_data_readq, PECI); > > + > > +u64 peci_request_data_dib(struct peci_request *req) > > +{ > > + return get_unaligned_le64(&req->rx.buf[0]); > > +} > > +EXPORT_SYMBOL_NS_GPL(peci_request_data_dib, PECI); > > + > > +#define __read_pkg_config(x, type) \ > > +struct peci_request *peci_pkg_cfg_##x(struct peci_device *device, u8 index, > > u16 param) \ > > +{ \ > > + return __pkg_cfg_read(device, index, param, sizeof(type)); \ > > +} \ > > Is there a reason for this particular API? I'd think a more natural one > that would offload a bit of boilerplate from callers would look more like > > int peci_pkg_cfg_##x(struct peci_device *device, u8 index, u16 param, type > *outp), > > returning peci_request_status() and writing the requested data to *outp > if that status is zero. We provide a consistent lower-level API for "internal" usage (for code in drivers/peci), operating on requests and allowing access to full request, including completion code, etc. Then - we wrap that with "external" API (e.g. include/linux/peci-cpu.h) which is the "more natural" one - it pulls out the necessary data from requests, deals with error handling in an appropriate way converting completion codes to errno values (abstracting away the PECI-specific details). > > > +EXPORT_SYMBOL_NS_GPL(peci_pkg_cfg_##x, PECI) > > + > > +__read_pkg_config(readb, u8); > > +__read_pkg_config(readw, u16); > > +__read_pkg_config(readl, u32); > > +__read_pkg_config(readq, u64); > > diff --git a/include/linux/peci.h b/include/linux/peci.h > > index cdf3008321fd..f9f37b874011 100644 > > --- a/include/linux/peci.h > > +++ b/include/linux/peci.h > > @@ -9,6 +9,14 @@ > > #include <linux/mutex.h> > > #include <linux/types.h> > > > > +#define PECI_PCS_PKG_ID 0 /* Package Identifier > > Read */ > > +#define PECI_PKG_ID_CPU_ID 0x0000 /* CPUID Info */ > > +#define PECI_PKG_ID_PLATFORM_ID 0x0001 /* Platform ID */ > > +#define PECI_PKG_ID_DEVICE_ID 0x0002 /* Uncore Device ID */ > > +#define PECI_PKG_ID_MAX_THREAD_ID 0x0003 /* Max Thread ID */ > > +#define PECI_PKG_ID_MICROCODE_REV 0x0004 /* CPU Microcode Update > > Revision */ > > +#define PECI_PKG_ID_MCA_ERROR_LOG 0x0005 /* Machine Check Status */ > > + > > struct peci_request; > > > > /** > > @@ -41,6 +49,11 @@ static inline struct peci_controller > > *to_peci_controller(void *d) > > * struct peci_device - PECI device > > * @dev: device object to register PECI device to the device model > > * @controller: manages the bus segment hosting this PECI device > > + * @info: PECI device characteristics > > + * @info.family: device family > > + * @info.model: device model > > + * @info.peci_revision: PECI revision supported by the PECI device > > + * @info.socket_id: the socket ID represented by the PECI device > > * @addr: address used on the PECI bus connected to the parent controller > > * > > * A peci_device identifies a single device (i.e. CPU) connected to a PECI > > bus. > > @@ -50,6 +63,12 @@ static inline struct peci_controller > > *to_peci_controller(void *d) > > struct peci_device { > > struct device dev; > > struct peci_controller *controller; > > + struct { > > + u16 family; > > + u8 model; > > + u8 peci_revision; > > This field gets set but doesn't seem to end up used anywhere; is it > useful? The idea was to have mechanism to validate the revision number retrieved via GetDIB with revision expected by the driver (since it uses commands that are PECI revision dependent), and warn if there's a mismatch. It seems I dropped the "validate and warn" part when doing the split on the series. Good catch - I'll fix this in v2. Thanks -Iwona > > > + u8 socket_id; > > + } info; > > u8 addr; > > }; > > > > diff --git a/lib/Kconfig b/lib/Kconfig > > index cc28bc1f2d84..a74e6c0fa75c 100644 > > --- a/lib/Kconfig > > +++ b/lib/Kconfig > > @@ -721,5 +721,5 @@ config ASN1_ENCODER > > > > config GENERIC_LIB_X86 > > bool > > - depends on X86 > > + depends on X86 || PECI > > default n > > -- > > 2.31.1
On Thu, Jul 29, 2021 at 04:17:06PM CDT, Winiarska, Iwona wrote: >On Tue, 2021-07-27 at 20:10 +0000, Zev Weiss wrote: >> On Mon, Jul 12, 2021 at 05:04:42PM CDT, Iwona Winiarska wrote: >> > Here we're adding support for PECI device drivers, which unlike PECI >> > controller drivers are actually able to provide functionalities to >> > userspace. >> > >> > We're also extending peci_request API to allow querying more details >> > about PECI device (e.g. model/family), that's going to be used to find >> > a compatible peci_driver. >> > >> > Signed-off-by: Iwona Winiarska <iwona.winiarska@intel.com> >> > Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> >> > --- >> > drivers/peci/Kconfig | 1 + >> > drivers/peci/core.c | 49 +++++++++ >> > drivers/peci/device.c | 99 ++++++++++++++++++ >> > drivers/peci/internal.h | 75 ++++++++++++++ >> > drivers/peci/request.c | 217 ++++++++++++++++++++++++++++++++++++++++ >> > include/linux/peci.h | 19 ++++ >> > lib/Kconfig | 2 +- >> > 7 files changed, 461 insertions(+), 1 deletion(-) >> > >> > diff --git a/drivers/peci/Kconfig b/drivers/peci/Kconfig >> > index 0d0ee8009713..27c31535843c 100644 >> > --- a/drivers/peci/Kconfig >> > +++ b/drivers/peci/Kconfig >> > @@ -2,6 +2,7 @@ >> > >> > menuconfig PECI >> > tristate "PECI support" >> > + select GENERIC_LIB_X86 >> > help >> > The Platform Environment Control Interface (PECI) is an interface >> > that provides a communication channel to Intel processors and >> > diff --git a/drivers/peci/core.c b/drivers/peci/core.c >> > index ae7a9572cdf3..94426b7f2618 100644 >> > --- a/drivers/peci/core.c >> > +++ b/drivers/peci/core.c >> > @@ -143,8 +143,57 @@ void peci_controller_remove(struct peci_controller >> > *controller) >> > } >> > EXPORT_SYMBOL_NS_GPL(peci_controller_remove, PECI); >> > >> > +static const struct peci_device_id * >> > +peci_bus_match_device_id(const struct peci_device_id *id, struct >> > peci_device *device) >> > +{ >> > + while (id->family != 0) { >> > + if (id->family == device->info.family && >> > + id->model == device->info.model) >> > + return id; >> > + id++; >> > + } >> > + >> > + return NULL; >> > +} >> > + >> > +static int peci_bus_device_match(struct device *dev, struct device_driver >> > *drv) >> > +{ >> > + struct peci_device *device = to_peci_device(dev); >> > + struct peci_driver *peci_drv = to_peci_driver(drv); >> > + >> > + if (dev->type != &peci_device_type) >> > + return 0; >> > + >> > + if (peci_bus_match_device_id(peci_drv->id_table, device)) >> > + return 1; >> > + >> > + return 0; >> > +} >> > + >> > +static int peci_bus_device_probe(struct device *dev) >> > +{ >> > + struct peci_device *device = to_peci_device(dev); >> > + struct peci_driver *driver = to_peci_driver(dev->driver); >> > + >> > + return driver->probe(device, peci_bus_match_device_id(driver- >> > >id_table, device)); >> > +} >> > + >> > +static int peci_bus_device_remove(struct device *dev) >> > +{ >> > + struct peci_device *device = to_peci_device(dev); >> > + struct peci_driver *driver = to_peci_driver(dev->driver); >> > + >> > + if (driver->remove) >> > + driver->remove(device); >> > + >> > + return 0; >> > +} >> > + >> > struct bus_type peci_bus_type = { >> > .name = "peci", >> > + .match = peci_bus_device_match, >> > + .probe = peci_bus_device_probe, >> > + .remove = peci_bus_device_remove, >> > .bus_groups = peci_bus_groups, >> > }; >> > >> > diff --git a/drivers/peci/device.c b/drivers/peci/device.c >> > index 1124862211e2..8c4bd1ebbc29 100644 >> > --- a/drivers/peci/device.c >> > +++ b/drivers/peci/device.c >> > @@ -1,11 +1,79 @@ >> > // SPDX-License-Identifier: GPL-2.0-only >> > // Copyright (c) 2018-2021 Intel Corporation >> > >> > +#include <linux/bitfield.h> >> > #include <linux/peci.h> >> > #include <linux/slab.h> >> > +#include <linux/x86/cpu.h> >> > >> > #include "internal.h" >> > >> > +#define REVISION_NUM_MASK GENMASK(15, 8) >> > +static int peci_get_revision(struct peci_device *device, u8 *revision) >> > +{ >> > + struct peci_request *req; >> > + u64 dib; >> > + >> > + req = peci_get_dib(device); >> > + if (IS_ERR(req)) >> > + return PTR_ERR(req); >> > + >> > + dib = peci_request_data_dib(req); >> > + if (dib == 0) { >> > + peci_request_free(req); >> > + return -EIO; >> >> Any particular reason to check for zero specifically here? It looks >> like that would be a case where the host CPU responds and everything's >> otherwise fine, but the host just happened to send back a bunch of zeros >> for whatever reason -- which may not be a valid PECI revision number, >> but if it sent back a bunch of 0xff bytes instead wouldn't that be >> equally invalid? > >The response with all 0's is possible (and defined) in certain device states. If >that happens - we don't want to continue adding the device (with "invalid" >revision 0), we just want to return error. > Okay, that's reasonable -- maybe worth a brief comment though. >> >> Also, given that the docs (the ones I have, at least) describe the DIB >> as a collection of individual bytes, dealing with it as a combined u64 >> seems a bit confusing to me -- could we just return req->rx.buf[1] >> instead? > >GetDIB returns 8-byte response, which is why we're treating it in this way >(similar to other commands). We're pulling out the whole response and use >FIELD_GET to obtain the data we need. > Sure -- but since the 8 bytes that GetDIB retrieves are a device info byte, a revision number byte, and six reserved bytes (at least as of the documentation I have access to), I'm not sure why we want to pack that all up into a u64 only to unpack a single byte from it a moment later with FIELD_GET(), when we've already got it in a convenient array-of-bytes form (req->rx.buf). I could understand wanting a u64 if the 8 bytes were all a single value, or if it had sub-fields that spanned byte boundaries in awkward ways or something, but given the format of the response data a byte array seems like the most natural way of dealing with it. I suppose it facilitates an easy zero check, but that could also be written as !memchr_inv(req->rx.buf, 0, 8) in the non-u64 case. >> >> > + } >> > + >> > + *revision = FIELD_GET(REVISION_NUM_MASK, dib); >> > + >> > + peci_request_free(req); >> > + >> > + return 0; >> > +} >> > + >> > +static int peci_get_cpu_id(struct peci_device *device, u32 *cpu_id) >> > +{ >> > + struct peci_request *req; >> > + int ret; >> > + >> > + req = peci_pkg_cfg_readl(device, PECI_PCS_PKG_ID, >> > PECI_PKG_ID_CPU_ID); >> > + if (IS_ERR(req)) >> > + return PTR_ERR(req); >> > + >> > + ret = peci_request_status(req); >> > + if (ret) >> > + goto out_req_free; >> > + >> > + *cpu_id = peci_request_data_readl(req); >> > +out_req_free: >> >> As suggested on patch #8, I think it might be cleaner to stack-allocate >> struct peci_request, which would obviate the need for explicit free >> calls in functions like this and hence might simplify it away entirely, >> but if this does remain like this we could just do >> >> if (!ret) >> *cpu_id = peci_request_data_readl(req); >> >> instead of using a goto to skip a single line. > >Please, see my response on patch 8. > >I would prefer to operate on allocated objects rather than on local variables in >case of peci requests. > >> >> > + peci_request_free(req); >> > + >> > + return ret; >> > +} >> > + >> > +static int peci_device_info_init(struct peci_device *device) >> > +{ >> > + u8 revision; >> > + u32 cpu_id; >> > + int ret; >> > + >> > + ret = peci_get_cpu_id(device, &cpu_id); >> > + if (ret) >> > + return ret; >> > + >> > + device->info.family = x86_family(cpu_id); >> > + device->info.model = x86_model(cpu_id); >> > + >> > + ret = peci_get_revision(device, &revision); >> > + if (ret) >> > + return ret; >> > + device->info.peci_revision = revision; >> > + >> > + device->info.socket_id = device->addr - PECI_BASE_ADDR; >> > + >> > + return 0; >> > +} >> > + >> > static int peci_detect(struct peci_controller *controller, u8 addr) >> > { >> > struct peci_request *req; >> > @@ -75,6 +143,10 @@ int peci_device_create(struct peci_controller >> > *controller, u8 addr) >> > device->dev.bus = &peci_bus_type; >> > device->dev.type = &peci_device_type; >> > >> > + ret = peci_device_info_init(device); >> > + if (ret) >> > + goto err_free; >> > + >> > ret = dev_set_name(&device->dev, "%d-%02x", controller->id, device- >> > >addr); >> > if (ret) >> > goto err_free; >> > @@ -98,6 +170,33 @@ void peci_device_destroy(struct peci_device *device) >> > device_unregister(&device->dev); >> > } >> > >> > +int __peci_driver_register(struct peci_driver *driver, struct module >> > *owner, >> > + const char *mod_name) >> > +{ >> > + driver->driver.bus = &peci_bus_type; >> > + driver->driver.owner = owner; >> > + driver->driver.mod_name = mod_name; >> > + >> > + if (!driver->probe) { >> > + pr_err("peci: trying to register driver without probe >> > callback\n"); >> > + return -EINVAL; >> > + } >> > + >> > + if (!driver->id_table) { >> > + pr_err("peci: trying to register driver without device id >> > table\n"); >> > + return -EINVAL; >> > + } >> > + >> > + return driver_register(&driver->driver); >> > +} >> > +EXPORT_SYMBOL_NS_GPL(__peci_driver_register, PECI); >> > + >> > +void peci_driver_unregister(struct peci_driver *driver) >> > +{ >> > + driver_unregister(&driver->driver); >> > +} >> > +EXPORT_SYMBOL_NS_GPL(peci_driver_unregister, PECI); >> > + >> > static void peci_device_release(struct device *dev) >> > { >> > struct peci_device *device = to_peci_device(dev); >> > diff --git a/drivers/peci/internal.h b/drivers/peci/internal.h >> > index 6b139adaf6b8..c891c93e077a 100644 >> > --- a/drivers/peci/internal.h >> > +++ b/drivers/peci/internal.h >> > @@ -19,6 +19,34 @@ struct peci_request; >> > struct peci_request *peci_request_alloc(struct peci_device *device, u8 >> > tx_len, u8 rx_len); >> > void peci_request_free(struct peci_request *req); >> > >> > +int peci_request_status(struct peci_request *req); >> > +u64 peci_request_data_dib(struct peci_request *req); >> > + >> > +u8 peci_request_data_readb(struct peci_request *req); >> > +u16 peci_request_data_readw(struct peci_request *req); >> > +u32 peci_request_data_readl(struct peci_request *req); >> > +u64 peci_request_data_readq(struct peci_request *req); >> > + >> > +struct peci_request *peci_get_dib(struct peci_device *device); >> > +struct peci_request *peci_get_temp(struct peci_device *device); >> > + >> > +struct peci_request *peci_pkg_cfg_readb(struct peci_device *device, u8 >> > index, u16 param); >> > +struct peci_request *peci_pkg_cfg_readw(struct peci_device *device, u8 >> > index, u16 param); >> > +struct peci_request *peci_pkg_cfg_readl(struct peci_device *device, u8 >> > index, u16 param); >> > +struct peci_request *peci_pkg_cfg_readq(struct peci_device *device, u8 >> > index, u16 param); >> > + >> > +/** >> > + * struct peci_device_id - PECI device data to match >> > + * @data: pointer to driver private data specific to device >> > + * @family: device family >> > + * @model: device model >> > + */ >> > +struct peci_device_id { >> > + const void *data; >> > + u16 family; >> > + u8 model; >> > +}; >> > + >> > extern struct device_type peci_device_type; >> > extern const struct attribute_group *peci_device_groups[]; >> > >> > @@ -28,6 +56,53 @@ void peci_device_destroy(struct peci_device *device); >> > extern struct bus_type peci_bus_type; >> > extern const struct attribute_group *peci_bus_groups[]; >> > >> > +/** >> > + * struct peci_driver - PECI driver >> > + * @driver: inherit device driver >> > + * @probe: probe callback >> > + * @remove: remove callback >> > + * @id_table: PECI device match table to decide which device to bind >> > + */ >> > +struct peci_driver { >> > + struct device_driver driver; >> > + int (*probe)(struct peci_device *device, const struct peci_device_id >> > *id); >> > + void (*remove)(struct peci_device *device); >> > + const struct peci_device_id *id_table; >> > +}; >> > + >> > +static inline struct peci_driver *to_peci_driver(struct device_driver *d) >> > +{ >> > + return container_of(d, struct peci_driver, driver); >> > +} >> > + >> > +int __peci_driver_register(struct peci_driver *driver, struct module >> > *owner, >> > + const char *mod_name); >> > +/** >> > + * peci_driver_register() - register PECI driver >> > + * @driver: the driver to be registered >> > + * @owner: owner module of the driver being registered >> > + * @mod_name: module name string >> > + * >> > + * PECI drivers that don't need to do anything special in module init >> > should >> > + * use the convenience "module_peci_driver" macro instead >> > + * >> > + * Return: zero on success, else a negative error code. >> > + */ >> > +#define peci_driver_register(driver) \ >> > + __peci_driver_register(driver, THIS_MODULE, KBUILD_MODNAME) >> > +void peci_driver_unregister(struct peci_driver *driver); >> > + >> > +/** >> > + * module_peci_driver() - Helper macro for registering a modular PECI >> > driver >> > + * @__peci_driver: peci_driver struct >> > + * >> > + * Helper macro for PECI drivers which do not do anything special in module >> > + * init/exit. This eliminates a lot of boilerplate. Each module may only >> > + * use this macro once, and calling it replaces module_init() and >> > module_exit() >> > + */ >> > +#define module_peci_driver(__peci_driver) \ >> > + module_driver(__peci_driver, peci_driver_register, >> > peci_driver_unregister) >> > + >> > extern struct device_type peci_controller_type; >> > >> > int peci_controller_scan_devices(struct peci_controller *controller); >> > diff --git a/drivers/peci/request.c b/drivers/peci/request.c >> > index 78cee51dfae1..48354455b554 100644 >> > --- a/drivers/peci/request.c >> > +++ b/drivers/peci/request.c >> > @@ -1,13 +1,142 @@ >> > // SPDX-License-Identifier: GPL-2.0-only >> > // Copyright (c) 2021 Intel Corporation >> > >> > +#include <linux/bug.h> >> > #include <linux/export.h> >> > #include <linux/peci.h> >> > #include <linux/slab.h> >> > #include <linux/types.h> >> > >> > +#include <asm/unaligned.h> >> > + >> > #include "internal.h" >> > >> > +#define PECI_GET_DIB_CMD 0xf7 >> > +#define PECI_GET_DIB_WR_LEN 1 >> > +#define PECI_GET_DIB_RD_LEN 8 >> > + >> > +#define PECI_RDPKGCFG_CMD 0xa1 >> > +#define PECI_RDPKGCFG_WRITE_LEN 5 >> > +#define PECI_RDPKGCFG_READ_LEN_BASE 1 >> > +#define PECI_WRPKGCFG_CMD 0xa5 >> > +#define PECI_WRPKGCFG_WRITE_LEN_BASE 6 >> > +#define PECI_WRPKGCFG_READ_LEN 1 >> > + >> > +/* Device Specific Completion Code (CC) Definition */ >> > +#define PECI_CC_SUCCESS 0x40 >> > +#define PECI_CC_NEED_RETRY 0x80 >> > +#define PECI_CC_OUT_OF_RESOURCE 0x81 >> > +#define PECI_CC_UNAVAIL_RESOURCE 0x82 >> > +#define PECI_CC_INVALID_REQ 0x90 >> > +#define PECI_CC_MCA_ERROR 0x91 >> > +#define PECI_CC_CATASTROPHIC_MCA_ERROR 0x93 >> > +#define PECI_CC_FATAL_MCA_ERROR 0x94 >> > +#define PECI_CC_PARITY_ERR_GPSB_OR_PMSB 0x98 >> > +#define PECI_CC_PARITY_ERR_GPSB_OR_PMSB_IERR 0x9B >> > +#define PECI_CC_PARITY_ERR_GPSB_OR_PMSB_MCA 0x9C >> > + >> > +#define PECI_RETRY_BIT BIT(0) >> > + >> > +#define PECI_RETRY_TIMEOUT msecs_to_jiffies(700) >> > +#define PECI_RETRY_INTERVAL_MIN msecs_to_jiffies(1) >> > +#define PECI_RETRY_INTERVAL_MAX msecs_to_jiffies(128) >> > + >> > +static u8 peci_request_data_cc(struct peci_request *req) >> > +{ >> > + return req->rx.buf[0]; >> > +} >> > + >> > +/** >> > + * peci_request_status() - return -errno based on PECI completion code >> > + * @req: the PECI request that contains response data with completion code >> > + * >> > + * It can't be used for Ping(), GetDIB() and GetTemp() - for those commands >> > we >> > + * don't expect completion code in the response. >> > + * >> > + * Return: -errno >> > + */ >> > +int peci_request_status(struct peci_request *req) >> > +{ >> > + u8 cc = peci_request_data_cc(req); >> > + >> > + if (cc != PECI_CC_SUCCESS) >> > + dev_dbg(&req->device->dev, "ret: %#02x\n", cc); >> > + >> > + switch (cc) { >> > + case PECI_CC_SUCCESS: >> > + return 0; >> > + case PECI_CC_NEED_RETRY: >> > + case PECI_CC_OUT_OF_RESOURCE: >> > + case PECI_CC_UNAVAIL_RESOURCE: >> > + return -EAGAIN; >> > + case PECI_CC_INVALID_REQ: >> > + return -EINVAL; >> > + case PECI_CC_MCA_ERROR: >> > + case PECI_CC_CATASTROPHIC_MCA_ERROR: >> > + case PECI_CC_FATAL_MCA_ERROR: >> > + case PECI_CC_PARITY_ERR_GPSB_OR_PMSB: >> > + case PECI_CC_PARITY_ERR_GPSB_OR_PMSB_IERR: >> > + case PECI_CC_PARITY_ERR_GPSB_OR_PMSB_MCA: >> > + return -EIO; >> > + } >> > + >> > + WARN_ONCE(1, "Unknown PECI completion code: %#02x\n", cc); >> > + >> > + return -EIO; >> > +} >> > +EXPORT_SYMBOL_NS_GPL(peci_request_status, PECI); >> > + >> > +static int peci_request_xfer(struct peci_request *req) >> > +{ >> > + struct peci_device *device = req->device; >> > + struct peci_controller *controller = device->controller; >> > + int ret; >> > + >> > + mutex_lock(&controller->bus_lock); >> > + ret = controller->xfer(controller, device->addr, req); >> > + mutex_unlock(&controller->bus_lock); >> > + >> > + return ret; >> > +} >> > + >> > +static int peci_request_xfer_retry(struct peci_request *req) >> > +{ >> > + long wait_interval = PECI_RETRY_INTERVAL_MIN; >> > + struct peci_device *device = req->device; >> > + struct peci_controller *controller = device->controller; >> > + unsigned long start = jiffies; >> > + int ret; >> > + >> > + /* Don't try to use it for ping */ >> > + if (WARN_ON(!req->rx.buf)) >> > + return 0; >> > + >> > + do { >> > + ret = peci_request_xfer(req); >> > + if (ret) { >> > + dev_dbg(&controller->dev, "xfer error: %d\n", ret); >> > + return ret; >> > + } >> > + >> > + if (peci_request_status(req) != -EAGAIN) >> > + return 0; >> > + >> > + /* Set the retry bit to indicate a retry attempt */ >> > + req->tx.buf[1] |= PECI_RETRY_BIT; >> > + >> > + if (schedule_timeout_interruptible(wait_interval)) >> > + return -ERESTARTSYS; >> > + >> > + wait_interval *= 2; >> > + if (wait_interval > PECI_RETRY_INTERVAL_MAX) >> > + wait_interval = PECI_RETRY_INTERVAL_MAX; >> >> wait_interval = min(wait_interval * 2, PECI_RETRY_INTERVAL_MAX) ? > >Ack. > >> >> > + } while (time_before(jiffies, start + PECI_RETRY_TIMEOUT)); >> > + >> > + dev_dbg(&controller->dev, "request timed out\n"); >> > + >> > + return -ETIMEDOUT; >> > +} >> > + >> > /** >> > * peci_request_alloc() - allocate &struct peci_request with buffers with >> > given lengths >> > * @device: PECI device to which request is going to be sent >> > @@ -72,3 +201,91 @@ void peci_request_free(struct peci_request *req) >> > kfree(req); >> > } >> > EXPORT_SYMBOL_NS_GPL(peci_request_free, PECI); >> > + >> > +struct peci_request *peci_get_dib(struct peci_device *device) >> > +{ >> > + struct peci_request *req; >> > + int ret; >> > + >> > + req = peci_request_alloc(device, PECI_GET_DIB_WR_LEN, >> > PECI_GET_DIB_RD_LEN); >> > + if (!req) >> > + return ERR_PTR(-ENOMEM); >> > + >> > + req->tx.buf[0] = PECI_GET_DIB_CMD; >> > + >> > + ret = peci_request_xfer(req); >> > + if (ret) { >> > + peci_request_free(req); >> > + return ERR_PTR(ret); >> > + } >> > + >> > + return req; >> > +} >> > +EXPORT_SYMBOL_NS_GPL(peci_get_dib, PECI); >> > + >> > +static struct peci_request * >> > +__pkg_cfg_read(struct peci_device *device, u8 index, u16 param, u8 len) >> > +{ >> > + struct peci_request *req; >> > + int ret; >> > + >> > + req = peci_request_alloc(device, PECI_RDPKGCFG_WRITE_LEN, >> > + PECI_RDPKGCFG_READ_LEN_BASE + len); >> > + if (!req) >> > + return ERR_PTR(-ENOMEM); >> > + >> > + req->tx.buf[0] = PECI_RDPKGCFG_CMD; >> > + req->tx.buf[1] = 0; >> > + req->tx.buf[2] = index; >> > + put_unaligned_le16(param, &req->tx.buf[3]); >> > + >> > + ret = peci_request_xfer_retry(req); >> > + if (ret) { >> > + peci_request_free(req); >> > + return ERR_PTR(ret); >> > + } >> > + >> > + return req; >> > +} >> > + >> > +u8 peci_request_data_readb(struct peci_request *req) >> > +{ >> > + return req->rx.buf[1]; >> > +} >> > +EXPORT_SYMBOL_NS_GPL(peci_request_data_readb, PECI); >> > + >> > +u16 peci_request_data_readw(struct peci_request *req) >> > +{ >> > + return get_unaligned_le16(&req->rx.buf[1]); >> > +} >> > +EXPORT_SYMBOL_NS_GPL(peci_request_data_readw, PECI); >> > + >> > +u32 peci_request_data_readl(struct peci_request *req) >> > +{ >> > + return get_unaligned_le32(&req->rx.buf[1]); >> > +} >> > +EXPORT_SYMBOL_NS_GPL(peci_request_data_readl, PECI); >> > + >> > +u64 peci_request_data_readq(struct peci_request *req) >> > +{ >> > + return get_unaligned_le64(&req->rx.buf[1]); >> > +} >> > +EXPORT_SYMBOL_NS_GPL(peci_request_data_readq, PECI); >> > + >> > +u64 peci_request_data_dib(struct peci_request *req) >> > +{ >> > + return get_unaligned_le64(&req->rx.buf[0]); >> > +} >> > +EXPORT_SYMBOL_NS_GPL(peci_request_data_dib, PECI); >> > + >> > +#define __read_pkg_config(x, type) \ >> > +struct peci_request *peci_pkg_cfg_##x(struct peci_device *device, u8 index, >> > u16 param) \ >> > +{ \ >> > + return __pkg_cfg_read(device, index, param, sizeof(type)); \ >> > +} \ >> >> Is there a reason for this particular API? I'd think a more natural one >> that would offload a bit of boilerplate from callers would look more like >> >> int peci_pkg_cfg_##x(struct peci_device *device, u8 index, u16 param, type >> *outp), >> >> returning peci_request_status() and writing the requested data to *outp >> if that status is zero. > >We provide a consistent lower-level API for "internal" usage (for code in >drivers/peci), operating on requests and allowing access to full request, >including completion code, etc. >Then - we wrap that with "external" API (e.g. include/linux/peci-cpu.h) which is >the "more natural" one - it pulls out the necessary data from requests, deals >with error handling in an appropriate way converting completion codes to errno >values (abstracting away the PECI-specific details). > >> >> > +EXPORT_SYMBOL_NS_GPL(peci_pkg_cfg_##x, PECI) >> > + >> > +__read_pkg_config(readb, u8); >> > +__read_pkg_config(readw, u16); >> > +__read_pkg_config(readl, u32); >> > +__read_pkg_config(readq, u64); >> > diff --git a/include/linux/peci.h b/include/linux/peci.h >> > index cdf3008321fd..f9f37b874011 100644 >> > --- a/include/linux/peci.h >> > +++ b/include/linux/peci.h >> > @@ -9,6 +9,14 @@ >> > #include <linux/mutex.h> >> > #include <linux/types.h> >> > >> > +#define PECI_PCS_PKG_ID 0 /* Package Identifier >> > Read */ >> > +#define PECI_PKG_ID_CPU_ID 0x0000 /* CPUID Info */ >> > +#define PECI_PKG_ID_PLATFORM_ID 0x0001 /* Platform ID */ >> > +#define PECI_PKG_ID_DEVICE_ID 0x0002 /* Uncore Device ID */ >> > +#define PECI_PKG_ID_MAX_THREAD_ID 0x0003 /* Max Thread ID */ >> > +#define PECI_PKG_ID_MICROCODE_REV 0x0004 /* CPU Microcode Update >> > Revision */ >> > +#define PECI_PKG_ID_MCA_ERROR_LOG 0x0005 /* Machine Check Status */ >> > + >> > struct peci_request; >> > >> > /** >> > @@ -41,6 +49,11 @@ static inline struct peci_controller >> > *to_peci_controller(void *d) >> > * struct peci_device - PECI device >> > * @dev: device object to register PECI device to the device model >> > * @controller: manages the bus segment hosting this PECI device >> > + * @info: PECI device characteristics >> > + * @info.family: device family >> > + * @info.model: device model >> > + * @info.peci_revision: PECI revision supported by the PECI device >> > + * @info.socket_id: the socket ID represented by the PECI device >> > * @addr: address used on the PECI bus connected to the parent controller >> > * >> > * A peci_device identifies a single device (i.e. CPU) connected to a PECI >> > bus. >> > @@ -50,6 +63,12 @@ static inline struct peci_controller >> > *to_peci_controller(void *d) >> > struct peci_device { >> > struct device dev; >> > struct peci_controller *controller; >> > + struct { >> > + u16 family; >> > + u8 model; >> > + u8 peci_revision; >> >> This field gets set but doesn't seem to end up used anywhere; is it >> useful? > >The idea was to have mechanism to validate the revision number retrieved via >GetDIB with revision expected by the driver (since it uses commands that are >PECI revision dependent), and warn if there's a mismatch. >It seems I dropped the "validate and warn" part when doing the split on the >series. Good catch - I'll fix this in v2. > >Thanks >-Iwona > >> >> > + u8 socket_id; >> > + } info; >> > u8 addr; >> > }; >> > >> > diff --git a/lib/Kconfig b/lib/Kconfig >> > index cc28bc1f2d84..a74e6c0fa75c 100644 >> > --- a/lib/Kconfig >> > +++ b/lib/Kconfig >> > @@ -721,5 +721,5 @@ config ASN1_ENCODER >> > >> > config GENERIC_LIB_X86 >> > bool >> > - depends on X86 >> > + depends on X86 || PECI >> > default n >> > -- >> > 2.31.1 >
On Thu, 2021-07-29 at 23:22 +0000, Zev Weiss wrote: > On Thu, Jul 29, 2021 at 04:17:06PM CDT, Winiarska, Iwona wrote: > > On Tue, 2021-07-27 at 20:10 +0000, Zev Weiss wrote: > > > On Mon, Jul 12, 2021 at 05:04:42PM CDT, Iwona Winiarska wrote: > > > > > > > > > > > > +#define REVISION_NUM_MASK GENMASK(15, 8) > > > > +static int peci_get_revision(struct peci_device *device, u8 *revision) > > > > +{ > > > > + struct peci_request *req; > > > > + u64 dib; > > > > + > > > > + req = peci_get_dib(device); > > > > + if (IS_ERR(req)) > > > > + return PTR_ERR(req); > > > > + > > > > + dib = peci_request_data_dib(req); > > > > + if (dib == 0) { > > > > + peci_request_free(req); > > > > + return -EIO; > > > > > > Any particular reason to check for zero specifically here? It looks > > > like that would be a case where the host CPU responds and everything's > > > otherwise fine, but the host just happened to send back a bunch of zeros > > > for whatever reason -- which may not be a valid PECI revision number, > > > but if it sent back a bunch of 0xff bytes instead wouldn't that be > > > equally invalid? > > > > The response with all 0's is possible (and defined) in certain device > > states. If > > that happens - we don't want to continue adding the device (with "invalid" > > revision 0), we just want to return error. > > > > Okay, that's reasonable -- maybe worth a brief comment though. /* * PECI device may be in a state where it is unable to return a proper DIB, * in which case it returns 0 as DIB value. * Let's treat this as an error to avoid carrying on with the detection using * invalid revision. */ > > > > > > > Also, given that the docs (the ones I have, at least) describe the DIB > > > as a collection of individual bytes, dealing with it as a combined u64 > > > seems a bit confusing to me -- could we just return req->rx.buf[1] > > > instead? > > > > GetDIB returns 8-byte response, which is why we're treating it in this way > > (similar to other commands). We're pulling out the whole response and use > > FIELD_GET to obtain the data we need. > > > > Sure -- but since the 8 bytes that GetDIB retrieves are a device info > byte, a revision number byte, and six reserved bytes (at least as of the > documentation I have access to), I'm not sure why we want to pack that > all up into a u64 only to unpack a single byte from it a moment later > with FIELD_GET(), when we've already got it in a convenient > array-of-bytes form (req->rx.buf). I could understand wanting a u64 if > the 8 bytes were all a single value, or if it had sub-fields that > spanned byte boundaries in awkward ways or something, but given the > format of the response data a byte array seems like the most natural way > of dealing with it. > > I suppose it facilitates an easy zero check, but that could also be > written as !memchr_inv(req->rx.buf, 0, 8) in the non-u64 case. What you suggest would look like this: static int peci_get_revision(struct peci_device *device, u8 *revision) { struct peci_request *req; req = peci_get_dib(device); if (IS_ERR(req)) return PTR_ERR(req); if (!memchr_inv(req->rx.buf, 0, PECI_GET_DIB_RD_LEN)) { peci_request_free(req); return -EIO; } *revision = req->rx.buf[1]; peci_request_free(req); return 0; } Note that the caller (device.c) now needs to know read length - PECI_GET_DIB_RD_LEN (which currently is internal to the request.c) and is digging into rx.buf directly (rather than using helper from internal.h). By forcing the callers to use helper functions, we can make things consistent across various commands and avoid exporting everything to everyone using a giant header with all definitions. I would prefer to keep peci_get_revision() as is. Thanks -Iwona
diff --git a/drivers/peci/Kconfig b/drivers/peci/Kconfig index 0d0ee8009713..27c31535843c 100644 --- a/drivers/peci/Kconfig +++ b/drivers/peci/Kconfig @@ -2,6 +2,7 @@ menuconfig PECI tristate "PECI support" + select GENERIC_LIB_X86 help The Platform Environment Control Interface (PECI) is an interface that provides a communication channel to Intel processors and diff --git a/drivers/peci/core.c b/drivers/peci/core.c index ae7a9572cdf3..94426b7f2618 100644 --- a/drivers/peci/core.c +++ b/drivers/peci/core.c @@ -143,8 +143,57 @@ void peci_controller_remove(struct peci_controller *controller) } EXPORT_SYMBOL_NS_GPL(peci_controller_remove, PECI); +static const struct peci_device_id * +peci_bus_match_device_id(const struct peci_device_id *id, struct peci_device *device) +{ + while (id->family != 0) { + if (id->family == device->info.family && + id->model == device->info.model) + return id; + id++; + } + + return NULL; +} + +static int peci_bus_device_match(struct device *dev, struct device_driver *drv) +{ + struct peci_device *device = to_peci_device(dev); + struct peci_driver *peci_drv = to_peci_driver(drv); + + if (dev->type != &peci_device_type) + return 0; + + if (peci_bus_match_device_id(peci_drv->id_table, device)) + return 1; + + return 0; +} + +static int peci_bus_device_probe(struct device *dev) +{ + struct peci_device *device = to_peci_device(dev); + struct peci_driver *driver = to_peci_driver(dev->driver); + + return driver->probe(device, peci_bus_match_device_id(driver->id_table, device)); +} + +static int peci_bus_device_remove(struct device *dev) +{ + struct peci_device *device = to_peci_device(dev); + struct peci_driver *driver = to_peci_driver(dev->driver); + + if (driver->remove) + driver->remove(device); + + return 0; +} + struct bus_type peci_bus_type = { .name = "peci", + .match = peci_bus_device_match, + .probe = peci_bus_device_probe, + .remove = peci_bus_device_remove, .bus_groups = peci_bus_groups, }; diff --git a/drivers/peci/device.c b/drivers/peci/device.c index 1124862211e2..8c4bd1ebbc29 100644 --- a/drivers/peci/device.c +++ b/drivers/peci/device.c @@ -1,11 +1,79 @@ // SPDX-License-Identifier: GPL-2.0-only // Copyright (c) 2018-2021 Intel Corporation +#include <linux/bitfield.h> #include <linux/peci.h> #include <linux/slab.h> +#include <linux/x86/cpu.h> #include "internal.h" +#define REVISION_NUM_MASK GENMASK(15, 8) +static int peci_get_revision(struct peci_device *device, u8 *revision) +{ + struct peci_request *req; + u64 dib; + + req = peci_get_dib(device); + if (IS_ERR(req)) + return PTR_ERR(req); + + dib = peci_request_data_dib(req); + if (dib == 0) { + peci_request_free(req); + return -EIO; + } + + *revision = FIELD_GET(REVISION_NUM_MASK, dib); + + peci_request_free(req); + + return 0; +} + +static int peci_get_cpu_id(struct peci_device *device, u32 *cpu_id) +{ + struct peci_request *req; + int ret; + + req = peci_pkg_cfg_readl(device, PECI_PCS_PKG_ID, PECI_PKG_ID_CPU_ID); + if (IS_ERR(req)) + return PTR_ERR(req); + + ret = peci_request_status(req); + if (ret) + goto out_req_free; + + *cpu_id = peci_request_data_readl(req); +out_req_free: + peci_request_free(req); + + return ret; +} + +static int peci_device_info_init(struct peci_device *device) +{ + u8 revision; + u32 cpu_id; + int ret; + + ret = peci_get_cpu_id(device, &cpu_id); + if (ret) + return ret; + + device->info.family = x86_family(cpu_id); + device->info.model = x86_model(cpu_id); + + ret = peci_get_revision(device, &revision); + if (ret) + return ret; + device->info.peci_revision = revision; + + device->info.socket_id = device->addr - PECI_BASE_ADDR; + + return 0; +} + static int peci_detect(struct peci_controller *controller, u8 addr) { struct peci_request *req; @@ -75,6 +143,10 @@ int peci_device_create(struct peci_controller *controller, u8 addr) device->dev.bus = &peci_bus_type; device->dev.type = &peci_device_type; + ret = peci_device_info_init(device); + if (ret) + goto err_free; + ret = dev_set_name(&device->dev, "%d-%02x", controller->id, device->addr); if (ret) goto err_free; @@ -98,6 +170,33 @@ void peci_device_destroy(struct peci_device *device) device_unregister(&device->dev); } +int __peci_driver_register(struct peci_driver *driver, struct module *owner, + const char *mod_name) +{ + driver->driver.bus = &peci_bus_type; + driver->driver.owner = owner; + driver->driver.mod_name = mod_name; + + if (!driver->probe) { + pr_err("peci: trying to register driver without probe callback\n"); + return -EINVAL; + } + + if (!driver->id_table) { + pr_err("peci: trying to register driver without device id table\n"); + return -EINVAL; + } + + return driver_register(&driver->driver); +} +EXPORT_SYMBOL_NS_GPL(__peci_driver_register, PECI); + +void peci_driver_unregister(struct peci_driver *driver) +{ + driver_unregister(&driver->driver); +} +EXPORT_SYMBOL_NS_GPL(peci_driver_unregister, PECI); + static void peci_device_release(struct device *dev) { struct peci_device *device = to_peci_device(dev); diff --git a/drivers/peci/internal.h b/drivers/peci/internal.h index 6b139adaf6b8..c891c93e077a 100644 --- a/drivers/peci/internal.h +++ b/drivers/peci/internal.h @@ -19,6 +19,34 @@ struct peci_request; struct peci_request *peci_request_alloc(struct peci_device *device, u8 tx_len, u8 rx_len); void peci_request_free(struct peci_request *req); +int peci_request_status(struct peci_request *req); +u64 peci_request_data_dib(struct peci_request *req); + +u8 peci_request_data_readb(struct peci_request *req); +u16 peci_request_data_readw(struct peci_request *req); +u32 peci_request_data_readl(struct peci_request *req); +u64 peci_request_data_readq(struct peci_request *req); + +struct peci_request *peci_get_dib(struct peci_device *device); +struct peci_request *peci_get_temp(struct peci_device *device); + +struct peci_request *peci_pkg_cfg_readb(struct peci_device *device, u8 index, u16 param); +struct peci_request *peci_pkg_cfg_readw(struct peci_device *device, u8 index, u16 param); +struct peci_request *peci_pkg_cfg_readl(struct peci_device *device, u8 index, u16 param); +struct peci_request *peci_pkg_cfg_readq(struct peci_device *device, u8 index, u16 param); + +/** + * struct peci_device_id - PECI device data to match + * @data: pointer to driver private data specific to device + * @family: device family + * @model: device model + */ +struct peci_device_id { + const void *data; + u16 family; + u8 model; +}; + extern struct device_type peci_device_type; extern const struct attribute_group *peci_device_groups[]; @@ -28,6 +56,53 @@ void peci_device_destroy(struct peci_device *device); extern struct bus_type peci_bus_type; extern const struct attribute_group *peci_bus_groups[]; +/** + * struct peci_driver - PECI driver + * @driver: inherit device driver + * @probe: probe callback + * @remove: remove callback + * @id_table: PECI device match table to decide which device to bind + */ +struct peci_driver { + struct device_driver driver; + int (*probe)(struct peci_device *device, const struct peci_device_id *id); + void (*remove)(struct peci_device *device); + const struct peci_device_id *id_table; +}; + +static inline struct peci_driver *to_peci_driver(struct device_driver *d) +{ + return container_of(d, struct peci_driver, driver); +} + +int __peci_driver_register(struct peci_driver *driver, struct module *owner, + const char *mod_name); +/** + * peci_driver_register() - register PECI driver + * @driver: the driver to be registered + * @owner: owner module of the driver being registered + * @mod_name: module name string + * + * PECI drivers that don't need to do anything special in module init should + * use the convenience "module_peci_driver" macro instead + * + * Return: zero on success, else a negative error code. + */ +#define peci_driver_register(driver) \ + __peci_driver_register(driver, THIS_MODULE, KBUILD_MODNAME) +void peci_driver_unregister(struct peci_driver *driver); + +/** + * module_peci_driver() - Helper macro for registering a modular PECI driver + * @__peci_driver: peci_driver struct + * + * Helper macro for PECI drivers which do not do anything special in module + * init/exit. This eliminates a lot of boilerplate. Each module may only + * use this macro once, and calling it replaces module_init() and module_exit() + */ +#define module_peci_driver(__peci_driver) \ + module_driver(__peci_driver, peci_driver_register, peci_driver_unregister) + extern struct device_type peci_controller_type; int peci_controller_scan_devices(struct peci_controller *controller); diff --git a/drivers/peci/request.c b/drivers/peci/request.c index 78cee51dfae1..48354455b554 100644 --- a/drivers/peci/request.c +++ b/drivers/peci/request.c @@ -1,13 +1,142 @@ // SPDX-License-Identifier: GPL-2.0-only // Copyright (c) 2021 Intel Corporation +#include <linux/bug.h> #include <linux/export.h> #include <linux/peci.h> #include <linux/slab.h> #include <linux/types.h> +#include <asm/unaligned.h> + #include "internal.h" +#define PECI_GET_DIB_CMD 0xf7 +#define PECI_GET_DIB_WR_LEN 1 +#define PECI_GET_DIB_RD_LEN 8 + +#define PECI_RDPKGCFG_CMD 0xa1 +#define PECI_RDPKGCFG_WRITE_LEN 5 +#define PECI_RDPKGCFG_READ_LEN_BASE 1 +#define PECI_WRPKGCFG_CMD 0xa5 +#define PECI_WRPKGCFG_WRITE_LEN_BASE 6 +#define PECI_WRPKGCFG_READ_LEN 1 + +/* Device Specific Completion Code (CC) Definition */ +#define PECI_CC_SUCCESS 0x40 +#define PECI_CC_NEED_RETRY 0x80 +#define PECI_CC_OUT_OF_RESOURCE 0x81 +#define PECI_CC_UNAVAIL_RESOURCE 0x82 +#define PECI_CC_INVALID_REQ 0x90 +#define PECI_CC_MCA_ERROR 0x91 +#define PECI_CC_CATASTROPHIC_MCA_ERROR 0x93 +#define PECI_CC_FATAL_MCA_ERROR 0x94 +#define PECI_CC_PARITY_ERR_GPSB_OR_PMSB 0x98 +#define PECI_CC_PARITY_ERR_GPSB_OR_PMSB_IERR 0x9B +#define PECI_CC_PARITY_ERR_GPSB_OR_PMSB_MCA 0x9C + +#define PECI_RETRY_BIT BIT(0) + +#define PECI_RETRY_TIMEOUT msecs_to_jiffies(700) +#define PECI_RETRY_INTERVAL_MIN msecs_to_jiffies(1) +#define PECI_RETRY_INTERVAL_MAX msecs_to_jiffies(128) + +static u8 peci_request_data_cc(struct peci_request *req) +{ + return req->rx.buf[0]; +} + +/** + * peci_request_status() - return -errno based on PECI completion code + * @req: the PECI request that contains response data with completion code + * + * It can't be used for Ping(), GetDIB() and GetTemp() - for those commands we + * don't expect completion code in the response. + * + * Return: -errno + */ +int peci_request_status(struct peci_request *req) +{ + u8 cc = peci_request_data_cc(req); + + if (cc != PECI_CC_SUCCESS) + dev_dbg(&req->device->dev, "ret: %#02x\n", cc); + + switch (cc) { + case PECI_CC_SUCCESS: + return 0; + case PECI_CC_NEED_RETRY: + case PECI_CC_OUT_OF_RESOURCE: + case PECI_CC_UNAVAIL_RESOURCE: + return -EAGAIN; + case PECI_CC_INVALID_REQ: + return -EINVAL; + case PECI_CC_MCA_ERROR: + case PECI_CC_CATASTROPHIC_MCA_ERROR: + case PECI_CC_FATAL_MCA_ERROR: + case PECI_CC_PARITY_ERR_GPSB_OR_PMSB: + case PECI_CC_PARITY_ERR_GPSB_OR_PMSB_IERR: + case PECI_CC_PARITY_ERR_GPSB_OR_PMSB_MCA: + return -EIO; + } + + WARN_ONCE(1, "Unknown PECI completion code: %#02x\n", cc); + + return -EIO; +} +EXPORT_SYMBOL_NS_GPL(peci_request_status, PECI); + +static int peci_request_xfer(struct peci_request *req) +{ + struct peci_device *device = req->device; + struct peci_controller *controller = device->controller; + int ret; + + mutex_lock(&controller->bus_lock); + ret = controller->xfer(controller, device->addr, req); + mutex_unlock(&controller->bus_lock); + + return ret; +} + +static int peci_request_xfer_retry(struct peci_request *req) +{ + long wait_interval = PECI_RETRY_INTERVAL_MIN; + struct peci_device *device = req->device; + struct peci_controller *controller = device->controller; + unsigned long start = jiffies; + int ret; + + /* Don't try to use it for ping */ + if (WARN_ON(!req->rx.buf)) + return 0; + + do { + ret = peci_request_xfer(req); + if (ret) { + dev_dbg(&controller->dev, "xfer error: %d\n", ret); + return ret; + } + + if (peci_request_status(req) != -EAGAIN) + return 0; + + /* Set the retry bit to indicate a retry attempt */ + req->tx.buf[1] |= PECI_RETRY_BIT; + + if (schedule_timeout_interruptible(wait_interval)) + return -ERESTARTSYS; + + wait_interval *= 2; + if (wait_interval > PECI_RETRY_INTERVAL_MAX) + wait_interval = PECI_RETRY_INTERVAL_MAX; + } while (time_before(jiffies, start + PECI_RETRY_TIMEOUT)); + + dev_dbg(&controller->dev, "request timed out\n"); + + return -ETIMEDOUT; +} + /** * peci_request_alloc() - allocate &struct peci_request with buffers with given lengths * @device: PECI device to which request is going to be sent @@ -72,3 +201,91 @@ void peci_request_free(struct peci_request *req) kfree(req); } EXPORT_SYMBOL_NS_GPL(peci_request_free, PECI); + +struct peci_request *peci_get_dib(struct peci_device *device) +{ + struct peci_request *req; + int ret; + + req = peci_request_alloc(device, PECI_GET_DIB_WR_LEN, PECI_GET_DIB_RD_LEN); + if (!req) + return ERR_PTR(-ENOMEM); + + req->tx.buf[0] = PECI_GET_DIB_CMD; + + ret = peci_request_xfer(req); + if (ret) { + peci_request_free(req); + return ERR_PTR(ret); + } + + return req; +} +EXPORT_SYMBOL_NS_GPL(peci_get_dib, PECI); + +static struct peci_request * +__pkg_cfg_read(struct peci_device *device, u8 index, u16 param, u8 len) +{ + struct peci_request *req; + int ret; + + req = peci_request_alloc(device, PECI_RDPKGCFG_WRITE_LEN, + PECI_RDPKGCFG_READ_LEN_BASE + len); + if (!req) + return ERR_PTR(-ENOMEM); + + req->tx.buf[0] = PECI_RDPKGCFG_CMD; + req->tx.buf[1] = 0; + req->tx.buf[2] = index; + put_unaligned_le16(param, &req->tx.buf[3]); + + ret = peci_request_xfer_retry(req); + if (ret) { + peci_request_free(req); + return ERR_PTR(ret); + } + + return req; +} + +u8 peci_request_data_readb(struct peci_request *req) +{ + return req->rx.buf[1]; +} +EXPORT_SYMBOL_NS_GPL(peci_request_data_readb, PECI); + +u16 peci_request_data_readw(struct peci_request *req) +{ + return get_unaligned_le16(&req->rx.buf[1]); +} +EXPORT_SYMBOL_NS_GPL(peci_request_data_readw, PECI); + +u32 peci_request_data_readl(struct peci_request *req) +{ + return get_unaligned_le32(&req->rx.buf[1]); +} +EXPORT_SYMBOL_NS_GPL(peci_request_data_readl, PECI); + +u64 peci_request_data_readq(struct peci_request *req) +{ + return get_unaligned_le64(&req->rx.buf[1]); +} +EXPORT_SYMBOL_NS_GPL(peci_request_data_readq, PECI); + +u64 peci_request_data_dib(struct peci_request *req) +{ + return get_unaligned_le64(&req->rx.buf[0]); +} +EXPORT_SYMBOL_NS_GPL(peci_request_data_dib, PECI); + +#define __read_pkg_config(x, type) \ +struct peci_request *peci_pkg_cfg_##x(struct peci_device *device, u8 index, u16 param) \ +{ \ + return __pkg_cfg_read(device, index, param, sizeof(type)); \ +} \ +EXPORT_SYMBOL_NS_GPL(peci_pkg_cfg_##x, PECI) + +__read_pkg_config(readb, u8); +__read_pkg_config(readw, u16); +__read_pkg_config(readl, u32); +__read_pkg_config(readq, u64); diff --git a/include/linux/peci.h b/include/linux/peci.h index cdf3008321fd..f9f37b874011 100644 --- a/include/linux/peci.h +++ b/include/linux/peci.h @@ -9,6 +9,14 @@ #include <linux/mutex.h> #include <linux/types.h> +#define PECI_PCS_PKG_ID 0 /* Package Identifier Read */ +#define PECI_PKG_ID_CPU_ID 0x0000 /* CPUID Info */ +#define PECI_PKG_ID_PLATFORM_ID 0x0001 /* Platform ID */ +#define PECI_PKG_ID_DEVICE_ID 0x0002 /* Uncore Device ID */ +#define PECI_PKG_ID_MAX_THREAD_ID 0x0003 /* Max Thread ID */ +#define PECI_PKG_ID_MICROCODE_REV 0x0004 /* CPU Microcode Update Revision */ +#define PECI_PKG_ID_MCA_ERROR_LOG 0x0005 /* Machine Check Status */ + struct peci_request; /** @@ -41,6 +49,11 @@ static inline struct peci_controller *to_peci_controller(void *d) * struct peci_device - PECI device * @dev: device object to register PECI device to the device model * @controller: manages the bus segment hosting this PECI device + * @info: PECI device characteristics + * @info.family: device family + * @info.model: device model + * @info.peci_revision: PECI revision supported by the PECI device + * @info.socket_id: the socket ID represented by the PECI device * @addr: address used on the PECI bus connected to the parent controller * * A peci_device identifies a single device (i.e. CPU) connected to a PECI bus. @@ -50,6 +63,12 @@ static inline struct peci_controller *to_peci_controller(void *d) struct peci_device { struct device dev; struct peci_controller *controller; + struct { + u16 family; + u8 model; + u8 peci_revision; + u8 socket_id; + } info; u8 addr; }; diff --git a/lib/Kconfig b/lib/Kconfig index cc28bc1f2d84..a74e6c0fa75c 100644 --- a/lib/Kconfig +++ b/lib/Kconfig @@ -721,5 +721,5 @@ config ASN1_ENCODER config GENERIC_LIB_X86 bool - depends on X86 + depends on X86 || PECI default n