diff mbox series

[u-boot,v2019.04-aspeed-openbmc,v2,05/10] ast2600: spl: Remove SECBOOT BL2 kconfig option

Message ID 20210420064648.994075-6-joel@jms.id.au
State New
Headers show
Series Use HACE to accelerate sha512 | expand

Commit Message

Joel Stanley April 20, 2021, 6:46 a.m. UTC
THis option was added in "ast2600: Allow selection of SPL boot devices"
to allow disabling the secboot BL2 loaders. Instead of adding the new
symbol the patch could have used the existing ASPEED_SECURE_BOOT option.

Change to use the existing option.

Signed-off-by: Joel Stanley <joel@jms.id.au>
---
 arch/arm/mach-aspeed/ast2600/Kconfig    | 12 ------------
 arch/arm/mach-aspeed/ast2600/spl_boot.c | 17 +++++++----------
 2 files changed, 7 insertions(+), 22 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm/mach-aspeed/ast2600/Kconfig b/arch/arm/mach-aspeed/ast2600/Kconfig
index 518f41b558d3..dd991e87c795 100644
--- a/arch/arm/mach-aspeed/ast2600/Kconfig
+++ b/arch/arm/mach-aspeed/ast2600/Kconfig
@@ -53,18 +53,6 @@  config TARGET_SLT_AST2600
 
 endchoice
 
-config ASPEED_SECBOOT_BL2
-	bool "ASPEED secure boot BL2 support"
-	depends on ASPEED_AST2600
-	help
-	  Enable ASPEED's "secboot" secure boot support for verifying
-	  the SPL's playload ("BL2").
-
-	  Enable this is if you're using secure boot support in the AST2600 (or similar)
-	  to verify your u-boot proper.
-
-	  Disable this is if you are using u-boot's vboot to verify u-boot.
-
 source "board/aspeed/evb_ast2600a0/Kconfig"
 source "board/aspeed/evb_ast2600a1/Kconfig"
 source "board/aspeed/ncsi_ast2600a0/Kconfig"
diff --git a/arch/arm/mach-aspeed/ast2600/spl_boot.c b/arch/arm/mach-aspeed/ast2600/spl_boot.c
index 06800940109e..517f3a767c82 100644
--- a/arch/arm/mach-aspeed/ast2600/spl_boot.c
+++ b/arch/arm/mach-aspeed/ast2600/spl_boot.c
@@ -23,7 +23,7 @@  static int aspeed_spl_ram_load_image(struct spl_image_info *spl_image,
 }
 SPL_LOAD_IMAGE_METHOD("RAM", 0, ASPEED_BOOT_DEVICE_RAM, aspeed_spl_ram_load_image);
 
-#if IS_ENABLED(ASPEED_SECBOOT_BL2)
+#if IS_ENABLED(CONFIG_ASPEED_SECURE_BOOT)
 static int aspeed_secboot_spl_ram_load_image(struct spl_image_info *spl_image,
 				      struct spl_boot_device *bootdev)
 {
@@ -42,9 +42,8 @@  static int aspeed_secboot_spl_ram_load_image(struct spl_image_info *spl_image,
 	return 0;
 }
 SPL_LOAD_IMAGE_METHOD("RAM with Aspeed Secure Boot", 0, ASPEED_SECBOOT_DEVICE_RAM, aspeed_secboot_spl_ram_load_image);
-#endif /* ASPEED_SECBOOT_BL2 */
+#endif /* IS_ENABLED(CONFIG_ASPEED_SECURE_BOOT) */
 
-#if IS_ENABLED(CONFIG_SPL_MMC_SUPPORT)
 static int aspeed_spl_mmc_load_image(struct spl_image_info *spl_image,
 				      struct spl_boot_device *bootdev)
 {
@@ -104,7 +103,7 @@  static int aspeed_spl_mmc_load_image(struct spl_image_info *spl_image,
 }
 SPL_LOAD_IMAGE_METHOD("MMC", 0, ASPEED_BOOT_DEVICE_MMC, aspeed_spl_mmc_load_image);
 
-#if IS_ENABLED(ASPEED_SECBOOT_BL2)
+#if IS_ENABLED(CONFIG_ASPEED_SECURE_BOOT)
 static int aspeed_secboot_spl_mmc_load_image(struct spl_image_info *spl_image,
 				      struct spl_boot_device *bootdev)
 {
@@ -165,8 +164,7 @@  static int aspeed_secboot_spl_mmc_load_image(struct spl_image_info *spl_image,
 	return 0;
 }
 SPL_LOAD_IMAGE_METHOD("MMC with Aspeed Secure Boot", 0, ASPEED_SECBOOT_DEVICE_MMC, aspeed_secboot_spl_mmc_load_image);
-#endif /* ASPEED_SECBOOT_BL2 */
-#endif
+#endif /* IS_ENABLED(CONFIG_ASPEED_SECURE_BOOT) */
 
 #if IS_ENABLED(CONFIG_SPL_YMODEM_SUPPORT)
 static int getcymodem(void)
@@ -211,8 +209,7 @@  end_stream:
 }
 SPL_LOAD_IMAGE_METHOD("UART", 0, ASPEED_BOOT_DEVICE_UART, aspeed_spl_ymodem_load_image);
 
-
-#if IS_ENABLED(ASPEED_SECBOOT_BL2)
+#if IS_ENABLED(CONFIG_ASPEED_SECURE_BOOT)
 static int aspeed_secboot_spl_ymodem_load_image(struct spl_image_info *spl_image,
 		struct spl_boot_device *bootdev)
 {
@@ -254,5 +251,5 @@  end_stream:
 	return ret;
 }
 SPL_LOAD_IMAGE_METHOD("UART with Aspeed Secure Boot", 0, ASPEED_SECBOOT_DEVICE_UART, aspeed_secboot_spl_ymodem_load_image);
-#endif /* ASPEED_SECBOOT_BL2 */
-#endif
+#endif /* IS_ENABLED(CONFIG_ASPEED_SECURE_BOOT) */
+#endif /* IS_ENABLED(CONFIG_SPL_YMODEM_SUPPORT) */