Message ID | 20161026065509.GA10287@distroguy.com |
---|---|
State | Accepted, archived |
Headers | show |
Hey Chris, On Wed, Oct 26, 2016 at 5:25 PM, Chris Smart <chris@distroguy.com> wrote: > /* RTC */ > + rtc@32 { > + compatible = "epson,rx8900" > + reg = <0x32>; Did you try building this? Cheers, Joel
On Thu, Oct 27, 2016 at 10:48:01AM +1030, Joel Stanley wrote: >Hey Chris, > >On Wed, Oct 26, 2016 at 5:25 PM, Chris Smart <chris@distroguy.com> wrote: >> /* RTC */ >> + rtc@32 { >> + compatible = "epson,rx8900" >> + reg = <0x32>; > >Did you try building this? > My bad, v3 incoming. -c
diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-witherspoon.dts b/arch/arm/boot/dts/aspeed-bmc-opp-witherspoon.dts index 328a9c4e189e..19a91a207530 100644 --- a/arch/arm/boot/dts/aspeed-bmc-opp-witherspoon.dts +++ b/arch/arm/boot/dts/aspeed-bmc-opp-witherspoon.dts @@ -148,7 +148,19 @@ /* TPM */ /* 9552 */ + /* RTC */ + rtc@32 { + compatible = "epson,rx8900" + reg = <0x32>; + /* + * If no battery, set this: + * epson,vdet-disable; + * If no trickle charge diode, set this: + * epson,vdet-disable; + */ + }; + /* EEPROM */ eeprom@51 {
This commit adds the relevant device tree entry for the Epson RX8900CE RTC module on the I2C bus. Note that there are two options that we may need to set. If there is no connected battery: epson,vdet-disable; If there is no trickle charge diode: epson,vdet-disable; These are currently left commented out in the commit. Signed-off-by: Chris Smart <chris@distroguy.com> --- Changes since v1: - fixed up the entry for rtc@32 arch/arm/boot/dts/aspeed-bmc-opp-witherspoon.dts | 12 ++++++++++++ 1 file changed, 12 insertions(+)