Show patches with: Submitter = Eddie James       |    State = Action Required       |    Archived = No       |   229 patches
« 1 2 3 »
Patch Series A/F/R/T S/W/F Date Submitter Delegate State
spi: fsi: Implement a timeout for polling status spi: fsi: Implement a timeout for polling status - - - - --- 2022-03-17 Eddie James New
leds: pca955x: Add HW blink support leds: pca955x: Add HW blink support - - - - --- 2022-03-30 Eddie James New
hwmon: (occ) Fix poll rate limiting hwmon: (occ) Fix poll rate limiting - 1 - - --- 2021-04-29 Eddie James New
fsi: sbefifo: Add sysfs file indicating a timeout error fsi: sbefifo: Add sysfs file indicating a timeout error - - 1 - --- 2021-09-20 Eddie James New
fsi: sbefifo: Add configurable in-command timeout fsi: sbefifo: Add configurable in-command timeout - - 1 - --- 2023-03-17 Eddie James New
[v4,4/4] leds: pca955x: Add HW blink support leds: pca955x: Add HW blink support - - 1 - --- 2022-04-12 Eddie James New
[v4,3/4] leds: pca955x: Optimize probe led selection leds: pca955x: Add HW blink support - - 1 - --- 2022-04-12 Eddie James New
[v4,2/4] leds: pca955x: Use pointers to driver data rather than I2C client leds: pca955x: Add HW blink support - - 1 - --- 2022-04-12 Eddie James New
[v4,1/4] leds: pca955x: Refactor with helper functions and renaming leds: pca955x: Add HW blink support - - 1 - --- 2022-04-12 Eddie James New
[v3,4/4] leds: pca955x: Add HW blink support leds: pca955x: Add HW blink support - - - - --- 2022-04-11 Eddie James New
[v3,3/4] leds: pca955x: Optimize probe led selection leds: pca955x: Add HW blink support - - - - --- 2022-04-11 Eddie James New
[v3,2/4] leds: pca955x: Use pointers to driver data rather than I2C client leds: pca955x: Add HW blink support - - - - --- 2022-04-11 Eddie James New
[v3,1/4] leds: pca955x: Refactor with helper functions and renaming leds: pca955x: Add HW blink support - - - - --- 2022-04-11 Eddie James New
[v2,3/3] fsi: occ: Add dynamic debug to dump command and response OCC: fsi and hwmon: Set sequence number in submit interface - - - - --- 2021-07-21 Eddie James New
[v2,2/3] hwmon: (occ) Remove sequence numbering and checksum calculation OCC: fsi and hwmon: Set sequence number in submit interface 1 - - - --- 2021-07-21 Eddie James New
[v2,2/2] leds: pca955x: Add HW blink support leds: pca955x: Add HW blink support - - - - --- 2022-04-07 Eddie James New
[v2,2/2] ARM: dts: Aspeed: Everest: Add GPIO hog for USB power control [v2,1/2] ARM: dts: Aspeed: Rainier: Add GPIO hog for USB power control - - - - --- 2021-12-08 Eddie James New
[v2,1/3] fsi: occ: Force sequence numbering per OCC OCC: fsi and hwmon: Set sequence number in submit interface - - 1 - --- 2021-07-21 Eddie James New
[v2,1/2] leds: pca955x: Clean up and optimize leds: pca955x: Add HW blink support - - - - --- 2022-04-07 Eddie James New
[v2,1/2] ARM: dts: Aspeed: Rainier: Add GPIO hog for USB power control [v2,1/2] ARM: dts: Aspeed: Rainier: Add GPIO hog for USB power control - - - - --- 2021-12-08 Eddie James New
[u-boot,v2019.04-aspeed-openbmc] board: ast2600-ibm: Add AST2600 BMC based POWER10+ servers [u-boot,v2019.04-aspeed-openbmc] board: ast2600-ibm: Add AST2600 BMC based POWER10+ servers - - - - --- 2022-05-25 Eddie James New
[u-boot,v2019.04-aspeed-openbmc] arm: dts: ast2600: Add I2C pinctrl [u-boot,v2019.04-aspeed-openbmc] arm: dts: ast2600: Add I2C pinctrl - - - - --- 2022-05-27 Eddie James New
[u-boot,v2019.04-aspeed-openbmc,v4,6/6] ast2600: Add GPIO controller and hog TPM reset pin Add GPIO hog support - - 1 - --- 2022-02-07 Eddie James New
[u-boot,v2019.04-aspeed-openbmc,v4,5/6] Add GPIO hogging support for AST2600 openbmc config Add GPIO hog support 1 - - - --- 2022-02-07 Eddie James New
[u-boot,v2019.04-aspeed-openbmc,v4,4/6] gpio: Enable hogging support in SPL Add GPIO hog support - - 1 - --- 2022-02-07 Eddie James New
[u-boot,v2019.04-aspeed-openbmc,v4,3/6] gpio: fixes for gpio-hog support Add GPIO hog support - - - - --- 2022-02-07 Eddie James New
[u-boot,v2019.04-aspeed-openbmc,v4,2/6] gpio: add gpio-hog support Add GPIO hog support - - - 2 --- 2022-02-07 Eddie James New
[u-boot,v2019.04-aspeed-openbmc,v4,1/6] dm: Add a No-op uclass Add GPIO hog support - - 1 - --- 2022-02-07 Eddie James New
[u-boot,v2019.04-aspeed-openbmc,v3,3/3] configs: Add AST2600 SPL eMMC configuration Aspeed: Support eMMC boot - - - - --- 2020-11-05 Eddie James New
[u-boot,v2019.04-aspeed-openbmc,v3,2/3] arch: ARM: Aspeed: Add SPL eMMC partition boot support Aspeed: Support eMMC boot - - 1 - --- 2020-11-05 Eddie James New
[u-boot,v2019.04-aspeed-openbmc,v3,1/3] ARM: dts: Aspeed: Tacoma and Rainier: Add eMMC nodes and pa… Aspeed: Support eMMC boot - - 1 - --- 2020-11-05 Eddie James New
[u-boot,v2019.04-aspeed-openbmc,v2] board: ast2600-ibm: Add AST2600 BMC based POWER10+ servers [u-boot,v2019.04-aspeed-openbmc,v2] board: ast2600-ibm: Add AST2600 BMC based POWER10+ servers - - - - --- 2022-05-26 Eddie James New
[u-boot,v2019.04-aspeed-openbmc,v2,9/9] board: ast2600-ibm: Add AST2600 BMC based POWER10+ servers ast2600: Add I2C TPMv2 driver - - - - --- 2022-05-13 Eddie James New
[u-boot,v2019.04-aspeed-openbmc,v2,8/9] arm: dts: ast2600-rainier: Add NPCT75X TPM ast2600: Add I2C TPMv2 driver - - - - --- 2022-05-13 Eddie James New
[u-boot,v2019.04-aspeed-openbmc,v2,7/9] tpm: add support for TPMv2.x I2C chips ast2600: Add I2C TPMv2 driver - - - - --- 2022-05-13 Eddie James New
[u-boot,v2019.04-aspeed-openbmc,v2,6/9] i2c: ast_i2c: Remove SCL direct drive mode ast2600: Add I2C TPMv2 driver - - - - --- 2022-05-13 Eddie James New
[u-boot,v2019.04-aspeed-openbmc,v2,6/6] ast2600: Add GPIO controller and hog TPM reset pin Add GPIO hog support - - - - --- 2022-02-07 Eddie James New
[u-boot,v2019.04-aspeed-openbmc,v2,5/9] tpm: core: Set timeouts before requesting locality ast2600: Add I2C TPMv2 driver - - - - --- 2022-05-13 Eddie James New
[u-boot,v2019.04-aspeed-openbmc,v2,5/6] Add GPIO hogging support for AST2600 openbmc config Add GPIO hog support - - - - --- 2022-02-07 Eddie James New
[u-boot,v2019.04-aspeed-openbmc,v2,4/9] tis: fix tpm_tis_remove() ast2600: Add I2C TPMv2 driver - - 1 - --- 2022-05-13 Eddie James New
[u-boot,v2019.04-aspeed-openbmc,v2,4/6] gpio: Enable hogging support in SPL Add GPIO hog support - - 1 - --- 2022-02-07 Eddie James New
[u-boot,v2019.04-aspeed-openbmc,v2,3/9] tpm2: Introduce TIS tpm core ast2600: Add I2C TPMv2 driver - - - - --- 2022-05-13 Eddie James New
[u-boot,v2019.04-aspeed-openbmc,v2,3/6] gpio: fixes for gpio-hog support Add GPIO hog support - - - - --- 2022-02-07 Eddie James New
[u-boot,v2019.04-aspeed-openbmc,v2,2/9] tpm: add #ifndef to fix redeclaration build errors ast2600: Add I2C TPMv2 driver - - - - --- 2022-05-13 Eddie James New
[u-boot,v2019.04-aspeed-openbmc,v2,2/6] gpio: add gpio-hog support Add GPIO hog support - - - 2 --- 2022-02-07 Eddie James New
[u-boot,v2019.04-aspeed-openbmc,v2,1/9] tpm: Add more TPM2 definitions ast2600: Add I2C TPMv2 driver - - 1 - --- 2022-05-13 Eddie James New
[u-boot,v2019.04-aspeed-openbmc,v2,1/6] dm: Add a No-op uclass Add GPIO hog support - - 1 - --- 2022-02-07 Eddie James New
[u-boot,v2019.04-aspeed-openbmc,5/5] configs: AST2600 Openbmc: Update config for eMMC boot AST2600: Boot from eMMC - - - - --- 2020-08-31 Eddie James New
[u-boot,v2019.04-aspeed-openbmc,5/5] aspeed: Add board_late_init to write TPM ast2600: Add I2C TPMv2 driver - - - - --- 2022-05-05 Eddie James New
[u-boot,v2019.04-aspeed-openbmc,4/5] configs: ast2600_openbmc_spl_emmc: Enable TPMv2 over I2C ast2600: Add I2C TPMv2 driver - - - - --- 2022-05-05 Eddie James New
[u-boot,v2019.04-aspeed-openbmc,4/5] ARM: dts: Aspeed: Tacoma and Rainier: Add eMMC nodes and param… AST2600: Boot from eMMC - - - - --- 2020-08-31 Eddie James New
[u-boot,v2019.04-aspeed-openbmc,4/4] ast2600: Measure the boot tpm: Support boot measurements - - - - --- 2023-01-25 Eddie James New
[u-boot,v2019.04-aspeed-openbmc,3/5] mmc: Add support for devicetree parameters for Aspeed controll… AST2600: Boot from eMMC - - - - --- 2020-08-31 Eddie James New
[u-boot,v2019.04-aspeed-openbmc,3/5] arm: dts: ast2600-rainier: Add NPCT75X TPM ast2600: Add I2C TPMv2 driver - - - - --- 2022-05-05 Eddie James New
[u-boot,v2019.04-aspeed-openbmc,3/4] bootm: Support boot measurement tpm: Support boot measurements - - - - --- 2023-01-25 Eddie James New
[u-boot,v2019.04-aspeed-openbmc,2/5] tpm: Add I2C driver for TPMv2 devices ast2600: Add I2C TPMv2 driver - - - - --- 2022-05-05 Eddie James New
[u-boot,v2019.04-aspeed-openbmc,2/5] spl: mmc: Switch partition error to debug AST2600: Boot from eMMC - - - - --- 2020-08-31 Eddie James New
[u-boot,v2019.04-aspeed-openbmc,2/4] tpm: Support boot measurements tpm: Support boot measurements - - - - --- 2023-01-25 Eddie James New
[u-boot,v2019.04-aspeed-openbmc,1/5] i2c: ast_i2c: Remove SCL direct drive mode ast2600: Add I2C TPMv2 driver - - - - --- 2022-05-05 Eddie James New
[u-boot,v2019.04-aspeed-openbmc,1/5] ARM: Aspeed: AST2600: Support booting from eMMC AST2600: Boot from eMMC - - - - --- 2020-08-31 Eddie James New
[u-boot,v2019.04-aspeed-openbmc,1/4] tpm: Pull in upstream changes tpm: Support boot measurements - - - - --- 2023-01-25 Eddie James New
[u-boot,v2019.04-aspeed-oepnbmc,v3,6/6] ast2600: Add GPIO controller and hog TPM reset pin Add GPIO hog support - - - - --- 2022-02-07 Eddie James New
[u-boot,v2019.04-aspeed-oepnbmc,v3,5/6] Add GPIO hogging support for AST2600 openbmc config Add GPIO hog support - - - - --- 2022-02-07 Eddie James New
[u-boot,v2019.04-aspeed-oepnbmc,v3,4/6] gpio: Enable hogging support in SPL Add GPIO hog support - - 1 - --- 2022-02-07 Eddie James New
[u-boot,v2019.04-aspeed-oepnbmc,v3,3/6] gpio: fixes for gpio-hog support Add GPIO hog support - - - - --- 2022-02-07 Eddie James New
[u-boot,v2019.04-aspeed-oepnbmc,v3,2/6] gpio: add gpio-hog support Add GPIO hog support - - - 2 --- 2022-02-07 Eddie James New
[u-boot,v2019.04-aspeed-oepnbmc,v3,1/6] dm: Add a No-op uclass Add GPIO hog support - - 1 - --- 2022-02-07 Eddie James New
[linux,dev-6.6] ARM: dts: Aspeed: Bonnell: Fix NVMe LED labels [linux,dev-6.6] ARM: dts: Aspeed: Bonnell: Fix NVMe LED labels - - - - --- 2024-03-21 Eddie James New
[linux,dev-6.5] leds: pca955x: Set default trigger state [linux,dev-6.5] leds: pca955x: Set default trigger state - - - - --- 2023-10-19 Eddie James New
[linux,dev-6.5,4/4] ARM: dts: aspeed: Rainier 4U: Delete fan dual-tach properties ARM: dts: aspeed: p10bmc: Add fan controller properties - - 1 - --- 2023-10-06 Eddie James New
[linux,dev-6.5,3/4] ARM: dts: aspeed: Bonnell: Add fan controller properties ARM: dts: aspeed: p10bmc: Add fan controller properties - - 1 - --- 2023-10-06 Eddie James New
[linux,dev-6.5,2/4] ARM: dts: aspeed: Everest: Add fan controller properties ARM: dts: aspeed: p10bmc: Add fan controller properties - - 1 - --- 2023-10-06 Eddie James New
[linux,dev-6.5,1/4] ARM: dts: aspeed: Rainier: Add fan controller properties ARM: dts: aspeed: p10bmc: Add fan controller properties - - 1 - --- 2023-10-06 Eddie James New
[linux,dev-6.1] ARM: dts: aspeed: p10bmc: Reorganize FSI tree and add I2C responders [linux,dev-6.1] ARM: dts: aspeed: p10bmc: Reorganize FSI tree and add I2C responders - - - - --- 2023-03-10 Eddie James New
[linux,dev-6.1] ARM: dts: aspeed: bonnell: Add reserved memory for TPM event log [linux,dev-6.1] ARM: dts: aspeed: bonnell: Add reserved memory for TPM event log - - - - --- 2023-06-16 Eddie James New
[linux,dev-6.1] ARM: dts: aspeed: Bonnell: Remove MAC3 [linux,dev-6.1] ARM: dts: aspeed: Bonnell: Remove MAC3 - - - - --- 2023-03-08 Eddie James New
[linux,dev-6.1,v2] ARM: dts: aspeed: p10bmc: Reorganize FSI tree and add I2C responders (#209) [linux,dev-6.1,v2] ARM: dts: aspeed: p10bmc: Reorganize FSI tree and add I2C responders (#209) - - - - --- 2023-04-12 Eddie James New
[linux,dev-6.0] arm: dts: aspeed: p10bmc: Enable UART2 [linux,dev-6.0] arm: dts: aspeed: p10bmc: Enable UART2 - - - - --- 2023-01-26 Eddie James New
[linux,dev-6.0] arm: dts: aspeed: ibm-power9-dual: Update OCC nodes [linux,dev-6.0] arm: dts: aspeed: ibm-power9-dual: Update OCC nodes - - - - --- 2022-11-16 Eddie James New
[linux,dev-6.0] ARM: dts: aspeed: p10bmc: Update battery node name [linux,dev-6.0] ARM: dts: aspeed: p10bmc: Update battery node name - - - - --- 2023-02-02 Eddie James New
[linux,dev-6.0] ARM: dts: aspeed: p10bmc: Add occ-hwmon nodes [linux,dev-6.0] ARM: dts: aspeed: p10bmc: Add occ-hwmon nodes - - - - --- 2022-11-01 Eddie James New
[linux,dev-6.0] ARM: dts: aspeed: bonnell: Update incorrect eeprom address [linux,dev-6.0] ARM: dts: aspeed: bonnell: Update incorrect eeprom address - - - - --- 2022-11-07 Eddie James New
[linux,dev-6.0,v2] arm: dts: aspeed: p10bmc: Enable UART2 [linux,dev-6.0,v2] arm: dts: aspeed: p10bmc: Enable UART2 - - - - --- 2023-02-02 Eddie James New
[linux,dev-6.0,3/3] ARM: dts: aspeed: p10bmc: Set watchdog pre-timeout interrupt watchdog: aspeed: Add pre-timeout interrupt support - - - - --- 2022-10-19 Eddie James New
[linux,dev-6.0,2/3] ARM: dts: aspeed: Setup watchdog pre-timeout interrupt watchdog: aspeed: Add pre-timeout interrupt support - - - - --- 2022-10-19 Eddie James New
[linux,dev-6.0,1/3] watchdog: aspeed: Add pre-timeout interrupt support watchdog: aspeed: Add pre-timeout interrupt support - - - - --- 2022-10-19 Eddie James New
[linux,dev-5.8] spi: fsi: Fix transfer returning without finalizing message [linux,dev-5.8] spi: fsi: Fix transfer returning without finalizing message - 1 - - --- 2020-11-10 Eddie James New
[linux,dev-5.8] fsi: aspeed: Set poll timeout based on clock divider [linux,dev-5.8] fsi: aspeed: Set poll timeout based on clock divider - - - - --- 2021-02-10 Eddie James New
[linux,dev-5.8] ARM: dts: Aspeed: Rainier: Rename 2U and add 4U [linux,dev-5.8] ARM: dts: Aspeed: Rainier: Rename 2U and add 4U - - - - --- 2020-09-18 Eddie James New
[linux,dev-5.8] ARM: dts: Aspeed: Rainier: Mark FSI SPI controllers as restricted [linux,dev-5.8] ARM: dts: Aspeed: Rainier: Mark FSI SPI controllers as restricted - - - - --- 2020-11-02 Eddie James New
[linux,dev-5.8] ARM: dts: Aspeed: Add Everest BMC machine [linux,dev-5.8] ARM: dts: Aspeed: Add Everest BMC machine - - - 1 --- 2020-12-11 Eddie James New
[linux,dev-5.8,v3] ARM: dts: Aspeed: Rainier: Add 4U device-tree [linux,dev-5.8,v3] ARM: dts: Aspeed: Rainier: Add 4U device-tree - - 1 - --- 2020-10-28 Eddie James New
[linux,dev-5.8,v2] ARM: dts: Aspeed: Rainier: Add 4U device-tree [linux,dev-5.8,v2] ARM: dts: Aspeed: Rainier: Add 4U device-tree - - - - --- 2020-09-23 Eddie James New
[linux,dev-5.8,4/4] ARM: dts: Aspeed: Rainier: Set FSI clock frequency AST2600 clock and FSI: Add APLL to control FSI clock - - - - --- 2020-08-24 Eddie James New
[linux,dev-5.8,3/4] fsi: Aspeed master: Set clock frequency from devicetree AST2600 clock and FSI: Add APLL to control FSI clock - - 1 - --- 2020-08-24 Eddie James New
[linux,dev-5.8,2/4] dt-bindings: fsi: Aspeed master: Add clock-frequency property AST2600 clock and FSI: Add APLL to control FSI clock - - - - --- 2020-08-24 Eddie James New
[linux,dev-5.8,1/4] clk: ast2600: Add functionality to the APLL clock AST2600 clock and FSI: Add APLL to control FSI clock - - - - --- 2020-08-24 Eddie James New
[linux,dev-5.4] leds: pca955x: Add a software implementation of the PCA9552 chip [linux,dev-5.4] leds: pca955x: Add a software implementation of the PCA9552 chip - - 1 - --- 2020-06-22 Eddie James New
[linux,dev-5.4,v2] fsi: core: Set slave local bus ownership during init [linux,dev-5.4,v2] fsi: core: Set slave local bus ownership during init - - - - --- 2020-06-08 Eddie James New
[linux,dev-5.4,1/2] ARM: dts: Aspeed: Rainier: Enable EHCI controller ARM: dts: Aspeed: Enable EHCI controllers - - - - --- 2020-06-16 Eddie James New
« 1 2 3 »