Show patches with: State = Action Required       |   2996 patches
« 1 2 3 4 … 29 30 »
Patch Series A/F/R/T S/W/F Date Submitter Delegate State
aspeed/ast-g5: Added ast_uart.{c, h} files, moved most of the diagnostic message printing to ast-g5… - - - - --- 2016-09-09 Maxim Sloyko jms New
ftgmac100: fixup MAC address set during board bringup - - - - --- 2016-11-22 Anton D. Kachalov New
[linux,dev-4.10] drivers/fsi: Remove scan from master registration - - - - --- 2017-07-27 Eddie James Needs Review / ACK
[arm/aspeed/ast2500,v3] eSPI: add ASPEED AST2500 eSPI driver to boot a host with PCH runs on eSPI [arm/aspeed/ast2500,v3] eSPI: add ASPEED AST2500 eSPI driver to boot a host with PCH runs on eSPI - - - - --- 2018-02-23 Haiyue Wang New
Support IPMB in OpenBMC Support IPMB in OpenBMC - - - - --- 2018-03-14 Haiyue Wang New
[u-boot,v2016.07-aspeed-openbmc] configs/ast: Add redundnant env [u-boot,v2016.07-aspeed-openbmc] configs/ast: Add redundnant env - - - - --- 2018-03-15 Brad Bishop New
[linux,dev-4.19,15/15] dts: npcm7xx: Modify NPCM7xx device tree dd NPCM7xx patches to dev-4.19 - - - - --- 2019-01-14 Tomer Maimon New
[dev-5.2] ARM: dts: aspeed: fp5280g2: Remove cold-fire [dev-5.2] ARM: dts: aspeed: fp5280g2: Remove cold-fire - - - - --- 2019-08-22 John Wang New
media: aspeed: clear garbage interrupts media: aspeed: clear garbage interrupts - - 1 - --- 2019-09-26 Jae Hyun Yoo New
[linux,dev-5.3] i2c: aspeed: Prevent state corruption for IRQ with no status [linux,dev-5.3] i2c: aspeed: Prevent state corruption for IRQ with no status - - 1 - --- 2019-10-18 Eddie James New
[linux,dev-5.3,7/7] fsi: aspeed: Special case repeated full word reads AST2600 FSI speed improvements - - - - --- 2019-10-25 Joel Stanley New
[v2] ARM: ASPEED: update default ARCH_NR_GPIO for ARCH_ASPEED [v2] ARM: ASPEED: update default ARCH_NR_GPIO for ARCH_ASPEED 1 - 1 - --- 2019-10-31 Tao Ren New
[linux,dev-5.3,v2,3/3] fsi: core: Fix small accesses and unaligned offsets via sysfs fsi: aspeed: Fix unaligned raw accesses, OPB0 byte order registers - - - - --- 2019-11-01 Andrew Jeffery New
[linux,dev-5.3] i2c: fsi: Increase performance [linux,dev-5.3] i2c: fsi: Increase performance - - - - --- 2019-11-04 Eddie James New
[net-next] net/ncsi: Support for multi host mellanox card [net-next] net/ncsi: Support for multi host mellanox card - - - - --- 2020-01-08 Vijay Khemka New
[1/2] clk: aspeed: add critical clock setting logic clk: aspeed/ast2600: Add critical clock setting logic - - - - --- 2020-01-15 Jae Hyun Yoo New
[2/2] clk: ast2600: add critical clock setting logic clk: aspeed/ast2600: Add critical clock setting logic - - - - --- 2020-01-15 Jae Hyun Yoo New
[v2] ARM: dts: aspeed: tiogapass: Add gpio line names [v2] ARM: dts: aspeed: tiogapass: Add gpio line names - - - - --- 2020-01-17 Vijay Khemka New
[v2] ARM: dts: aspeed: update Hr855xg2 device tree [v2] ARM: dts: aspeed: update Hr855xg2 device tree - - - - --- 2020-01-23 Andrew Peng New
[linux,dev-5.4,v2] ARM: dts: aspeed: update Hr855xg2 device tree [linux,dev-5.4,v2] ARM: dts: aspeed: update Hr855xg2 device tree - - - - --- 2020-01-23 Andrew Peng New
[linux,dev-5.4] fsi: aspeed: Add clock debugfs [linux,dev-5.4] fsi: aspeed: Add clock debugfs - - - - --- 2020-01-24 Joel Stanley New
[u-boot-v2016.07] libfdt: Make it compatible with newer dtc [u-boot-v2016.07] libfdt: Make it compatible with newer dtc - - - - --- 2020-05-12 Patrick Williams New
[linux,dev-5.4,v2] fsi: core: Set slave local bus ownership during init [linux,dev-5.4,v2] fsi: core: Set slave local bus ownership during init - - - - --- 2020-06-08 Eddie James New
[linux,dev-5.4,1/2] ARM: dts: Aspeed: Rainier: Enable EHCI controller ARM: dts: Aspeed: Enable EHCI controllers - - - - --- 2020-06-16 Eddie James New
[linux,dev-5.4] leds: pca955x: Add a software implementation of the PCA9552 chip [linux,dev-5.4] leds: pca955x: Add a software implementation of the PCA9552 chip - - 1 - --- 2020-06-22 Eddie James New
ARM: dts: aspeed: cmm: fixup i2c tree ARM: dts: aspeed: cmm: fixup i2c tree - - - - --- 2020-07-01 Tao Ren New
[u-boot,v2019.04-aspeed-openbmc] config: ast2600 openbmc: Move environment to eMMC [u-boot,v2019.04-aspeed-openbmc] config: ast2600 openbmc: Move environment to eMMC - - - - --- 2020-07-07 Adriana Kobylak New
[u-boot,v2019.04-aspeed-openbmc,v2] config: ast2600 openbmc: Move environment to eMMC [u-boot,v2019.04-aspeed-openbmc,v2] config: ast2600 openbmc: Move environment to eMMC - - - 1 --- 2020-07-08 Adriana Kobylak New
[linux,dev-5.7,v1] ARM: dts: aspeed: rainier: Add I2c buses for nvme use [linux,dev-5.7,v1] ARM: dts: aspeed: rainier: Add I2c buses for nvme use - - - - --- 2020-07-21 Jet Li New
[linux,dev-5.4,1/3] fsi: aspeed: Support CFAM reset GPIO fsi: aspeed: CFAM reset support - - 1 - --- 2020-07-24 Joel Stanley New
[1/2] rainier: Add leds that are off 9551 on Operator Panel [1/2] rainier: Add leds that are off 9551 on Operator Panel - - 1 - --- 2020-07-27 vishwanatha subbanna New
[2/2] rainier: Add LEDs that are controlled by ASPEED [1/2] rainier: Add leds that are off 9551 on Operator Panel - - 1 - --- 2020-07-27 vishwanatha subbanna New
[linux,dev-5.7,2/2] rainier: Add LEDs that are controlled by ASPEED Untitled series #193066 - - 1 - --- 2020-07-29 vishwanatha subbanna New
[linux,dev-5.7,2/2] rainier: Add LEDs that are controlled by ASPEED [linux,dev-5.7,1/2] rainier: Add leds that are off 9551 on Operator Panel - - 1 - --- 2020-07-29 vishwanatha subbanna New
[linux,dev-5.7,1/2] rainier: Add leds that are off 9551 on Operator Panel [linux,dev-5.7,1/2] rainier: Add leds that are off 9551 on Operator Panel - - 1 - --- 2020-07-29 vishwanatha subbanna New
[linux,dev-5.7,1/2] fsi: scom: Add dev_dbg in put_scom and get_scom paths fsi: scom: FSI2PIB error recovery - - - - --- 2020-07-29 Joel Stanley New
[linux,dev-5.7,2/2] fsi: scom: Handle FSI2PIB timeout fsi: scom: FSI2PIB error recovery - - - - --- 2020-07-29 Joel Stanley New
[u-boot,v2016.07-aspeed-openbmc] drivers: ftgmac100: use hardware MAC by default [u-boot,v2016.07-aspeed-openbmc] drivers: ftgmac100: use hardware MAC by default - - - - --- 2020-08-10 Alexander A. Filippov New
[linux,dev-5.8] mtd: spi-nor: sfdp: Revert "default to addr_width of 3 for configurable widths" [linux,dev-5.8] mtd: spi-nor: sfdp: Revert "default to addr_width of 3 for configurable widths" - 1 - 1 --- 2020-08-12 Joel Stanley New
[linux,dev-5.8,1/4] clk: ast2600: Add functionality to the APLL clock AST2600 clock and FSI: Add APLL to control FSI clock - - - - --- 2020-08-24 Eddie James New
[linux,dev-5.8,2/4] dt-bindings: fsi: Aspeed master: Add clock-frequency property AST2600 clock and FSI: Add APLL to control FSI clock - - - - --- 2020-08-24 Eddie James New
[linux,dev-5.8,3/4] fsi: Aspeed master: Set clock frequency from devicetree AST2600 clock and FSI: Add APLL to control FSI clock - - 1 - --- 2020-08-24 Eddie James New
[linux,dev-5.8,4/4] ARM: dts: Aspeed: Rainier: Set FSI clock frequency AST2600 clock and FSI: Add APLL to control FSI clock - - - - --- 2020-08-24 Eddie James New
[linux,dev-5.8,1/3] pmbus: (max31785) Retry enabling fans after writing MFR_FAN_CONFIG MAX31785 Fan Controller Work-arounds - - - - --- 2020-08-27 Andrew Jeffery New
[linux,dev-5.8,2/3] pmbus: (max31785) Add a local pmbus_set_page() implementation MAX31785 Fan Controller Work-arounds - - - - --- 2020-08-27 Andrew Jeffery New
[linux,dev-5.8,3/3] pmbus: (core) Add a one-shot retry in pmbus_set_page() MAX31785 Fan Controller Work-arounds - - - - --- 2020-08-27 Andrew Jeffery New
[u-boot,v2019.04-aspeed-openbmc,1/5] ARM: Aspeed: AST2600: Support booting from eMMC AST2600: Boot from eMMC - - - - --- 2020-08-31 Eddie James New
[u-boot,v2019.04-aspeed-openbmc,2/5] spl: mmc: Switch partition error to debug AST2600: Boot from eMMC - - - - --- 2020-08-31 Eddie James New
[u-boot,v2019.04-aspeed-openbmc,3/5] mmc: Add support for devicetree parameters for Aspeed controll… AST2600: Boot from eMMC - - - - --- 2020-08-31 Eddie James New
[u-boot,v2019.04-aspeed-openbmc,4/5] ARM: dts: Aspeed: Tacoma and Rainier: Add eMMC nodes and param… AST2600: Boot from eMMC - - - - --- 2020-08-31 Eddie James New
[u-boot,v2019.04-aspeed-openbmc,5/5] configs: AST2600 Openbmc: Update config for eMMC boot AST2600: Boot from eMMC - - - - --- 2020-08-31 Eddie James New
[linux,dev-5.8,v2] ARM: dts: aspeed: rainier: Add I2C buses for NVMe use [linux,dev-5.8,v2] ARM: dts: aspeed: rainier: Add I2C buses for NVMe use - - - - --- 2020-09-01 Jet Li New
[linux,dev-5.8,1/3] i2c: Allow throttling of transfers to client devices i2c: Introduce transfer throttling - - - - --- 2020-09-02 Andrew Jeffery New
[linux,dev-5.8,2/3] pmbus: (ucd9000) Throttle SMBus transfers to avoid poor behaviour i2c: Introduce transfer throttling - - - - --- 2020-09-02 Andrew Jeffery New
[linux,dev-5.8,3/3] ucd9000: Add a throttle delay attribute in debugfs i2c: Introduce transfer throttling - - - - --- 2020-09-02 Andrew Jeffery New
[linux,dev-5.8] ARM: dts: rainier: Disable internal pull-downs on eMMC pins [linux,dev-5.8] ARM: dts: rainier: Disable internal pull-downs on eMMC pins - - - - --- 2020-09-09 Andrew Jeffery New
[linux,dev-5.4,v1] ARM: dts: aspeed: Add Mowgli BMC platform [linux,dev-5.4,v1] ARM: dts: aspeed: Add Mowgli BMC platform - - - - --- 2020-09-10 Ben Pai New
[linux,dev-5.8] ARM: dts: Aspeed: Rainier: Rename 2U and add 4U [linux,dev-5.8] ARM: dts: Aspeed: Rainier: Rename 2U and add 4U - - - - --- 2020-09-18 Eddie James New
[linux,dev-5.8,v2] ARM: dts: Aspeed: Rainier: Add 4U device-tree [linux,dev-5.8,v2] ARM: dts: Aspeed: Rainier: Add 4U device-tree - - - - --- 2020-09-23 Eddie James New
[U-Boot,v2019.04-aspeed-openbmc,1/3] ARM: dts: Aspeed: Tacoma and Rainier: Add eMMC nodes and param… Aspeed: Support eMMC boot - - 1 - --- 2020-09-28 Eddie James New
[U-Boot,v2019.04-aspeed-openbmc,2/3] arch: ARM: Aspeed: Add SPL eMMC partition boot support Aspeed: Support eMMC boot - - 1 - --- 2020-09-28 Eddie James New
[U-Boot,v2019.04-aspeed-openbmc,3/3] configs: Add AST2600 SPL eMMC configuration Aspeed: Support eMMC boot - - - - --- 2020-09-28 Eddie James New
peci: Set "Wake On PECI" mode when required peci: Set "Wake On PECI" mode when required - - - - --- 2020-10-21 Andrei Kartashev New
ARM: dts: Fix label address for 64MiB OpenBMC flash layout ARM: dts: Fix label address for 64MiB OpenBMC flash layout 1 - 1 - --- 2020-10-22 George Liu New
[linux,dev-5.8] ARM: dts: aspeed: amd-ethanolx: Enable KCS channel 3 [linux,dev-5.8] ARM: dts: aspeed: amd-ethanolx: Enable KCS channel 3 - - - - --- 2020-10-24 Konstantin Aladyshev New
pinctrl: aspeed: Fix GPI only function problem. pinctrl: aspeed: Fix GPI only function problem. - 1 - - --- 2020-10-27 Billy Tsai New
[v2,1/2] net: ftgmac100: move phy connect out from ftgmac100_setup_mdio add ast2400/2500 phy-handle support - - 1 - --- 2020-10-27 Ivan Mikhaylov New
[v2,2/2] net: ftgmac100: add handling of mdio/phy nodes for ast2400/2500 add ast2400/2500 phy-handle support - - - - --- 2020-10-27 Ivan Mikhaylov New
[linux,dev-5.8,v3] ARM: dts: Aspeed: Rainier: Add 4U device-tree [linux,dev-5.8,v3] ARM: dts: Aspeed: Rainier: Add 4U device-tree - - 1 - --- 2020-10-28 Eddie James New
[U-Boot,v2019.04-aspeed-openbmc,v2,1/3] ARM: dts: Aspeed: Tacoma and Rainier: Add eMMC nodes and pa… Aspeed: Support eMMC boot - - 1 - --- 2020-10-29 Eddie James New
[U-Boot,v2019.04-aspeed-openbmc,v2,2/3] arch: ARM: Aspeed: Add SPL eMMC partition boot support Aspeed: Support eMMC boot - - 1 - --- 2020-10-29 Eddie James New
[U-Boot,v2019.04-aspeed-openbmc,v2,3/3] configs: Add AST2600 SPL eMMC configuration Aspeed: Support eMMC boot - - - - --- 2020-10-29 Eddie James New
[v2] pinctrl: aspeed: Fix GPI only function problem. [v2] pinctrl: aspeed: Fix GPI only function problem. - 1 1 - --- 2020-10-30 Billy Tsai New
[v3,1/3] net: ftgmac100: move phy connect out from ftgmac100_setup_mdio add ast2400/2500 phy-handle support - - 1 - --- 2020-10-30 Ivan Mikhaylov New
[v3,2/3] net: ftgmac100: add handling of mdio/phy nodes for ast2400/2500 add ast2400/2500 phy-handle support - - 1 - --- 2020-10-30 Ivan Mikhaylov New
[v3,3/3] dt-bindings: net: ftgmac100: describe phy-handle and MDIO add ast2400/2500 phy-handle support - - 1 - --- 2020-10-30 Ivan Mikhaylov New
[linux,dev-5.8] ARM: dts: Aspeed: Rainier: Mark FSI SPI controllers as restricted [linux,dev-5.8] ARM: dts: Aspeed: Rainier: Mark FSI SPI controllers as restricted - - - - --- 2020-11-02 Eddie James New
[linux,dev-5.8] Fii Kudo project device tree file [linux,dev-5.8] Fii Kudo project device tree file - - - - --- 2020-11-04 Lancelot Kao New
[u-boot,v2019.04-aspeed-openbmc,v3,1/3] ARM: dts: Aspeed: Tacoma and Rainier: Add eMMC nodes and pa… Aspeed: Support eMMC boot - - 1 - --- 2020-11-05 Eddie James New
[u-boot,v2019.04-aspeed-openbmc,v3,2/3] arch: ARM: Aspeed: Add SPL eMMC partition boot support Aspeed: Support eMMC boot - - 1 - --- 2020-11-05 Eddie James New
[u-boot,v2019.04-aspeed-openbmc,v3,3/3] configs: Add AST2600 SPL eMMC configuration Aspeed: Support eMMC boot - - - - --- 2020-11-05 Eddie James New
ARM: dts: aspeed: wedge400: Fix FMC flash0 layout ARM: dts: aspeed: wedge400: Fix FMC flash0 layout - - 1 - --- 2020-11-10 Tao Ren New
ARM: dts: aspeed: minipack: Fixup I2C tree ARM: dts: aspeed: minipack: Fixup I2C tree - - 1 - --- 2020-11-10 Tao Ren New
[linux,dev-5.8] spi: fsi: Fix transfer returning without finalizing message [linux,dev-5.8] spi: fsi: Fix transfer returning without finalizing message - 1 - - --- 2020-11-10 Eddie James New
[v2,linux,dev-5.8] Fii Kudo project device tree file [v2,linux,dev-5.8] Fii Kudo project device tree file - - - - --- 2020-11-10 Lancelot Kao New
[linux,dev-5.8,1/3] ARM: dts: aspeed: amd-ethanolx: Enable KCS channel 3 [linux,dev-5.8,1/3] ARM: dts: aspeed: amd-ethanolx: Enable KCS channel 3 - - 2 - --- 2020-11-11 Konstantin Aladyshev New
[linux,dev-5.8,2/3] ARM: dts: aspeed: amd-ethanolx: Enable devices for the iKVM functionality [linux,dev-5.8,1/3] ARM: dts: aspeed: amd-ethanolx: Enable KCS channel 3 - - 2 - --- 2020-11-11 Konstantin Aladyshev New
[linux,dev-5.8,3/3] ARM: dts: aspeed: amd-ethanolx: Add GPIO line names [linux,dev-5.8,1/3] ARM: dts: aspeed: amd-ethanolx: Enable KCS channel 3 - - - - --- 2020-11-11 Konstantin Aladyshev New
[1/4] ARM: dts: aspeed: Common dtsi for Facebook AST2400 Network BMCs ARM: dts: aspeed: Add Facebook Galaxy100 BMC - - - - --- 2020-11-11 Tao Ren New
[2/4] ARM: dts: aspeed: wedge40: Use common dtsi ARM: dts: aspeed: Add Facebook Galaxy100 BMC - - - - --- 2020-11-11 Tao Ren New
[3/4] ARM: dts: aspeed: wedge100: Use common dtsi ARM: dts: aspeed: Add Facebook Galaxy100 BMC - - - - --- 2020-11-11 Tao Ren New
[4/4] ARM: dts: aspeed: Add Facebook Galaxy100 (AST2400) BMC ARM: dts: aspeed: Add Facebook Galaxy100 BMC - - - - --- 2020-11-11 Tao Ren New
[v3,linux,dev-5.8] Fii Kudo project device tree file Add device tree for the Kudo BMC. Kudo is an A… [v3,linux,dev-5.8] Fii Kudo project device tree file Add device tree for the Kudo BMC. Kudo is an A… - - - - --- 2020-11-12 Lancelot Kao New
[v4,linux,dev-5.8] Fii Kudo project device tree file [v4,linux,dev-5.8] Fii Kudo project device tree file - - 1 - --- 2020-11-12 Lancelot Kao New
QEMU - No 'PCI' bus found for device 'virtio-rng-pci' QEMU - No 'PCI' bus found for device 'virtio-rng-pci' - - - - --- 2020-11-16 Ambrozewicz, Adrian New
[v5,linux,dev-5.8] Fii Kudo project device tree file [v5,linux,dev-5.8] Fii Kudo project device tree file - - 2 - --- 2020-11-16 Lancelot Kao New
[1/2] hwmon: (max127) Add Maxim MAX127 hardware monitoring driver hwmon: (max127) Add Maxim MAX127 hardware monitoring - - - - --- 2020-11-17 Tao Ren New
[2/2] docs: hwmon: Document max127 driver hwmon: (max127) Add Maxim MAX127 hardware monitoring - - - - --- 2020-11-17 Tao Ren New
[linux,dev-5.8] soc: aspeed: Remove misc control interface driver [linux,dev-5.8] soc: aspeed: Remove misc control interface driver - - - - --- 2020-11-17 Joel Stanley New
[v2,1/2] hwmon: (max127) Add Maxim MAX127 hardware monitoring driver hwmon: (max127) Add Maxim MAX127 hardware monitoring - - - - --- 2020-11-18 Tao Ren New
« 1 2 3 4 … 29 30 »