| Message ID | 20201030133707.12099-1-i.mikhaylov@yadro.com |
|---|---|
| Headers | show |
| Series | add ast2400/2500 phy-handle support | expand |
On Fri, 30 Oct 2020 16:37:04 +0300 Ivan Mikhaylov wrote: > This patch introduces ast2400/2500 phy-handle support with an embedded > MDIO controller. At the current moment it is not possible to set options > with this format on ast2400/2500: > > mac { > phy-handle = <&phy>; > phy-mode = "rgmii"; > > mdio { > #address-cells = <1>; > #size-cells = <0>; > > phy: ethernet-phy@0 { > compatible = "ethernet-phy-idxxxx.yyyy"; > reg = <0>; > }; > }; > }; > > The patch fixes it and gets possible PHYs and register them with > of_mdiobus_register. Applied, thanks!
This patch introduces ast2400/2500 phy-handle support with an embedded MDIO controller. At the current moment it is not possible to set options with this format on ast2400/2500: mac { phy-handle = <&phy>; phy-mode = "rgmii"; mdio { #address-cells = <1>; #size-cells = <0>; phy: ethernet-phy@0 { compatible = "ethernet-phy-idxxxx.yyyy"; reg = <0>; }; }; }; The patch fixes it and gets possible PHYs and register them with of_mdiobus_register. Changes from v3: 1. add dt-bindings description of MDIO node and phy-handle option with example. Changes from v2: 1. change manual phy interface type check on phy_interface_mode_is_rgmii function. 2. add err_phy_connect label. 3. split ftgmac100_destroy_mdio into ftgmac100_phy_disconnect and ftgmac100_destroy_mdio. 4. remove unneeded mdio_np checks. Changes from v1: 1. split one patch into two. Ivan Mikhaylov (3): net: ftgmac100: move phy connect out from ftgmac100_setup_mdio net: ftgmac100: add handling of mdio/phy nodes for ast2400/2500 dt-bindings: net: ftgmac100: describe phy-handle and MDIO .../devicetree/bindings/net/ftgmac100.txt | 25 ++++ drivers/net/ethernet/faraday/ftgmac100.c | 122 ++++++++++-------- 2 files changed, 96 insertions(+), 51 deletions(-)