@@ -4,37 +4,29 @@
# Check that UNREPLIED tcp conntrack will eventually timeout.
#
-# Kselftest framework requirement - SKIP code is 4.
-ksft_skip=4
-ret=0
-
-waittime=20
-sfx=$(mktemp -u "XXXXXXXX")
-ns1="ns1-$sfx"
-ns2="ns2-$sfx"
+source lib.sh
-nft --version > /dev/null 2>&1
-if [ $? -ne 0 ];then
+if ! nft --version > /dev/null 2>&1;then
echo "SKIP: Could not run test without nft tool"
exit $ksft_skip
fi
-ip -Version > /dev/null 2>&1
-if [ $? -ne 0 ];then
- echo "SKIP: Could not run test without ip tool"
+if ! conntrack --version > /dev/null 2>&1;then
+ echo "SKIP: Could not run test without conntrack tool"
exit $ksft_skip
fi
+ret=0
+
cleanup() {
- ip netns pids $ns1 | xargs kill 2>/dev/null
- ip netns pids $ns2 | xargs kill 2>/dev/null
+ ip netns pids "$ns1" | xargs kill 2>/dev/null
+ ip netns pids "$ns2" | xargs kill 2>/dev/null
- ip netns del $ns1
- ip netns del $ns2
+ cleanup_all_ns
}
ipv4() {
- echo -n 192.168.$1.2
+ echo -n 192.168."$1".2
}
check_counter()
@@ -44,51 +36,53 @@ check_counter()
expect=$3
local lret=0
- cnt=$(ip netns exec $ns2 nft list counter inet filter "$name" | grep -q "$expect")
- if [ $? -ne 0 ]; then
+ if ! ip netns exec "$ns2" nft list counter inet filter "$name" | grep -q "$expect"; then
echo "ERROR: counter $name in $ns2 has unexpected value (expected $expect)" 1>&2
- ip netns exec $ns2 nft list counter inet filter "$name" 1>&2
+ ip netns exec "$ns2" nft list counter inet filter "$name" 1>&2
lret=1
fi
return $lret
}
-# Create test namespaces
-ip netns add $ns1 || exit 1
-
trap cleanup EXIT
-ip netns add $ns2 || exit 1
+# Create test namespaces
+setup_ns ns1 ns2
# Connect the namespace to the host using a veth pair
-ip -net $ns1 link add name veth1 type veth peer name veth2
-ip -net $ns1 link set netns $ns2 dev veth2
+ip -net "$ns1" link add name veth1 type veth peer name veth2
+ip -net "$ns1" link set netns "$ns2" dev veth2
-ip -net $ns1 link set up dev lo
-ip -net $ns2 link set up dev lo
-ip -net $ns1 link set up dev veth1
-ip -net $ns2 link set up dev veth2
+ip -net "$ns1" link set up dev lo
+ip -net "$ns2" link set up dev lo
+ip -net "$ns1" link set up dev veth1
+ip -net "$ns2" link set up dev veth2
-ip -net $ns2 addr add 10.11.11.2/24 dev veth2
-ip -net $ns2 route add default via 10.11.11.1
+ip -net "$ns2" addr add 10.11.11.2/24 dev veth2
+ip -net "$ns2" route add default via 10.11.11.1
-ip netns exec $ns2 sysctl -q net.ipv4.conf.veth2.forwarding=1
+ip netns exec "$ns2" sysctl -q net.ipv4.conf.veth2.forwarding=1
# add a rule inside NS so we enable conntrack
-ip netns exec $ns1 iptables -A INPUT -m state --state established,related -j ACCEPT
+ip netns exec "$ns1" nft -f - <<EOF
+table inet filter {
+ chain input {
+ type filter hook input priority 0; policy accept;
+ ct state established accept
+ }
+}
+EOF
-ip -net $ns1 addr add 10.11.11.1/24 dev veth1
-ip -net $ns1 route add 10.99.99.99 via 10.11.11.2
+ip -net "$ns1" addr add 10.11.11.1/24 dev veth1
+ip -net "$ns1" route add 10.99.99.99 via 10.11.11.2
# Check connectivity works
-ip netns exec $ns1 ping -q -c 2 10.11.11.2 >/dev/null || exit 1
-
-ip netns exec $ns2 nc -l -p 8080 < /dev/null &
+ip netns exec "$ns1" ping -q -c 2 10.11.11.2 >/dev/null || exit 1
-# however, conntrack entries are there
+ip netns exec "$ns2" socat -u -4 TCP-LISTEN:8080,reuseaddr STDOUT &
-ip netns exec $ns2 nft -f - <<EOF
+ip netns exec "$ns2" nft -f - <<EOF
table inet filter {
counter connreq { }
counter redir { }
@@ -104,17 +98,15 @@ if [ $? -ne 0 ]; then
exit 1
fi
-ip netns exec $ns2 sysctl -q net.netfilter.nf_conntrack_tcp_timeout_syn_sent=10
+ip netns exec "$ns2" sysctl -q net.netfilter.nf_conntrack_tcp_timeout_syn_sent=10
echo "INFO: connect $ns1 -> $ns2 to the virtual ip"
-ip netns exec $ns1 bash -c 'while true ; do
- nc -p 60000 10.99.99.99 80
- sleep 1
+ip netns exec "$ns1" bash -c 'for i in $(seq 1 $BUSYWAIT_TIMEOUT) ; do
+ socat -u STDIN TCP:10.99.99.99:80 < /dev/null
+ sleep 0.1
done' &
-sleep 1
-
-ip netns exec $ns2 nft -f - <<EOF
+ip netns exec "$ns2" nft -f - <<EOF
table inet nat {
chain prerouting {
type nat hook prerouting priority 0; policy accept;
@@ -127,34 +119,28 @@ if [ $? -ne 0 ]; then
exit 1
fi
-count=$(ip netns exec $ns2 conntrack -L -p tcp --dport 80 2>/dev/null | wc -l)
-if [ $count -eq 0 ]; then
+count=$(ip netns exec "$ns2" conntrack -L -p tcp --dport 80 2>/dev/null | wc -l)
+if [ "$count" -eq 0 ]; then
echo "ERROR: $ns2 did not pick up tcp connection from peer"
exit 1
fi
-echo "INFO: NAT redirect added in ns $ns2, waiting for $waittime seconds for nat to take effect"
-for i in $(seq 1 $waittime); do
- echo -n "."
-
- sleep 1
-
- count=$(ip netns exec $ns2 conntrack -L -p tcp --reply-port-src 8080 2>/dev/null | wc -l)
- if [ $count -gt 0 ]; then
- echo
- echo "PASS: redirection took effect after $i seconds"
- break
+wait_for_redirect()
+{
+ count=$(ip netns exec "$ns2" conntrack -L -p tcp --reply-port-src 8080 2>/dev/null | wc -l)
+ if [ "$count" -gt 0 ]; then
+ return 0
fi
- m=$((i%20))
- if [ $m -eq 0 ]; then
- echo " waited for $i seconds"
- fi
-done
+ return 1
+}
+echo "INFO: NAT redirect added in ns $ns2, waiting for $BUSYWAIT_TIMEOUT ms for nat to take effect"
+
+busywait $BUSYWAIT_TIMEOUT wait_for_redirect
+ret=$?
expect="packets 1 bytes 60"
-check_counter "$ns2" "redir" "$expect"
-if [ $? -ne 0 ]; then
+if ! check_counter "$ns2" "redir" "$expect"; then
ret=1
fi
Replace nc with socat. Too many different implementations of nc are around with incompatible options ("nc: cannot use -p and -l"). Signed-off-by: Florian Westphal <fw@strlen.de> --- .../net/netfilter/conntrack_tcp_unreplied.sh | 124 ++++++++---------- 1 file changed, 55 insertions(+), 69 deletions(-)