| Message ID | c250b2591a70bd8b31eef56d82cf5f5ccb47cc22.1532954208.git-series.quentin.schulz@bootlin.com |
|---|---|
| State | Changes Requested, archived |
| Delegated to: | David Miller |
| Headers | show |
| Series | mscc: ocelot: add support for SerDes muxing configuration | expand |
On 30/07/2018 14:43:46+0200, Quentin Schulz wrote: > HSIO contains registers for PLL5 configuration, SerDes/switch port > muxing and a thermal sensor, hence we can't keep it in the switch DT > node. > > Signed-off-by: Quentin Schulz <quentin.schulz@bootlin.com> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> > --- > arch/mips/boot/dts/mscc/ocelot.dtsi | 14 +++++++++----- > 1 file changed, 9 insertions(+), 5 deletions(-) > > diff --git a/arch/mips/boot/dts/mscc/ocelot.dtsi b/arch/mips/boot/dts/mscc/ocelot.dtsi > index afe8fc9..c51663a 100644 > --- a/arch/mips/boot/dts/mscc/ocelot.dtsi > +++ b/arch/mips/boot/dts/mscc/ocelot.dtsi > @@ -96,7 +96,6 @@ > reg = <0x1010000 0x10000>, > <0x1030000 0x10000>, > <0x1080000 0x100>, > - <0x10d0000 0x10000>, > <0x11e0000 0x100>, > <0x11f0000 0x100>, > <0x1200000 0x100>, > @@ -110,10 +109,10 @@ > <0x1280000 0x100>, > <0x1800000 0x80000>, > <0x1880000 0x10000>; > - reg-names = "sys", "rew", "qs", "hsio", "port0", > - "port1", "port2", "port3", "port4", "port5", > - "port6", "port7", "port8", "port9", "port10", > - "qsys", "ana"; > + reg-names = "sys", "rew", "qs", "port0", "port1", > + "port2", "port3", "port4", "port5", "port6", > + "port7", "port8", "port9", "port10", "qsys", > + "ana"; > interrupts = <21 22>; > interrupt-names = "xtr", "inj"; > > @@ -220,5 +219,10 @@ > pinctrl-0 = <&miim1>; > status = "disabled"; > }; > + > + hsio: syscon@10d0000 { > + compatible = "mscc,ocelot-hsio", "syscon", "simple-mfd"; > + reg = <0x10d0000 0x10000>; > + }; > }; > }; > -- > git-series 0.9.1
diff --git a/arch/mips/boot/dts/mscc/ocelot.dtsi b/arch/mips/boot/dts/mscc/ocelot.dtsi index afe8fc9..c51663a 100644 --- a/arch/mips/boot/dts/mscc/ocelot.dtsi +++ b/arch/mips/boot/dts/mscc/ocelot.dtsi @@ -96,7 +96,6 @@ reg = <0x1010000 0x10000>, <0x1030000 0x10000>, <0x1080000 0x100>, - <0x10d0000 0x10000>, <0x11e0000 0x100>, <0x11f0000 0x100>, <0x1200000 0x100>, @@ -110,10 +109,10 @@ <0x1280000 0x100>, <0x1800000 0x80000>, <0x1880000 0x10000>; - reg-names = "sys", "rew", "qs", "hsio", "port0", - "port1", "port2", "port3", "port4", "port5", - "port6", "port7", "port8", "port9", "port10", - "qsys", "ana"; + reg-names = "sys", "rew", "qs", "port0", "port1", + "port2", "port3", "port4", "port5", "port6", + "port7", "port8", "port9", "port10", "qsys", + "ana"; interrupts = <21 22>; interrupt-names = "xtr", "inj"; @@ -220,5 +219,10 @@ pinctrl-0 = <&miim1>; status = "disabled"; }; + + hsio: syscon@10d0000 { + compatible = "mscc,ocelot-hsio", "syscon", "simple-mfd"; + reg = <0x10d0000 0x10000>; + }; }; };
HSIO contains registers for PLL5 configuration, SerDes/switch port muxing and a thermal sensor, hence we can't keep it in the switch DT node. Signed-off-by: Quentin Schulz <quentin.schulz@bootlin.com> --- arch/mips/boot/dts/mscc/ocelot.dtsi | 14 +++++++++----- 1 file changed, 9 insertions(+), 5 deletions(-)