Message ID | E1ihDF7-0002Hr-S3@rmk-PC.armlinux.org.uk |
---|---|
State | Accepted |
Delegated to: | David Miller |
Headers | show |
Series | [net-next] net: sfp: report error on failure to read sfp soft status | expand |
From: Russell King <rmk+kernel@armlinux.org.uk> Date: Tue, 17 Dec 2019 13:50:29 +0000 > Report a rate-limited error if we fail to read the SFP soft status, > and preserve the current status in that case. This avoids I2C bus > errors from triggering a link flap. > > Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Applied.
diff --git a/drivers/net/phy/sfp.c b/drivers/net/phy/sfp.c index e54aef921038..73c2969f11a4 100644 --- a/drivers/net/phy/sfp.c +++ b/drivers/net/phy/sfp.c @@ -442,13 +442,20 @@ static unsigned int sfp_soft_get_state(struct sfp *sfp) { unsigned int state = 0; u8 status; + int ret; - if (sfp_read(sfp, true, SFP_STATUS, &status, sizeof(status)) == - sizeof(status)) { + ret = sfp_read(sfp, true, SFP_STATUS, &status, sizeof(status)); + if (ret == sizeof(status)) { if (status & SFP_STATUS_RX_LOS) state |= SFP_F_LOS; if (status & SFP_STATUS_TX_FAULT) state |= SFP_F_TX_FAULT; + } else { + dev_err_ratelimited(sfp->dev, + "failed to read SFP soft status: %d\n", + ret); + /* Preserve the current state */ + state = sfp->state; } return state & sfp->state_soft_mask;
Report a rate-limited error if we fail to read the SFP soft status, and preserve the current status in that case. This avoids I2C bus errors from triggering a link flap. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> --- drivers/net/phy/sfp.c | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-)