@@ -342,9 +342,7 @@ phy_interface_t sfp_select_interface(struct sfp_bus *bus,
if (phylink_test(link_modes, 2500baseX_Full))
return PHY_INTERFACE_MODE_2500BASEX;
- if (id->base.e1000_base_t ||
- id->base.e100_base_lx ||
- id->base.e100_base_fx)
+ if (id->base.e1000_base_t)
return PHY_INTERFACE_MODE_SGMII;
if (phylink_test(link_modes, 1000baseX_Full))
@@ -1489,18 +1489,7 @@ static void sfp_sm_fault(struct sfp *sfp, unsigned int next_state, bool warn)
static void sfp_sm_probe_for_phy(struct sfp *sfp)
{
- /* Setting the serdes link mode is guesswork: there's no
- * field in the EEPROM which indicates what mode should
- * be used.
- *
- * If it's a gigabit-only fiber module, it probably does
- * not have a PHY, so switch to 802.3z negotiation mode.
- * Otherwise, switch to SGMII mode (which is required to
- * support non-gigabit speeds) and probe for a PHY.
- */
- if (sfp->id.base.e1000_base_t ||
- sfp->id.base.e100_base_lx ||
- sfp->id.base.e100_base_fx)
+ if (sfp->id.base.e1000_base_t)
sfp_sm_probe_phy(sfp);
}