@@ -47,11 +47,12 @@ enum {
SFP_E_TIMEOUT,
SFP_MOD_EMPTY = 0,
+ SFP_MOD_ERROR,
SFP_MOD_PROBE,
+ SFP_MOD_WAITDEV,
SFP_MOD_HPOWER,
SFP_MOD_WAITPWR,
SFP_MOD_PRESENT,
- SFP_MOD_ERROR,
SFP_DEV_DETACHED = 0,
SFP_DEV_DOWN,
@@ -70,11 +71,12 @@ enum {
static const char * const mod_state_strings[] = {
[SFP_MOD_EMPTY] = "empty",
+ [SFP_MOD_ERROR] = "error",
[SFP_MOD_PROBE] = "probe",
+ [SFP_MOD_WAITDEV] = "waitdev",
[SFP_MOD_HPOWER] = "hpower",
[SFP_MOD_WAITPWR] = "waitpwr",
[SFP_MOD_PRESENT] = "present",
- [SFP_MOD_ERROR] = "error",
};
static const char *mod_state_to_str(unsigned short mod_state)
@@ -1481,16 +1483,13 @@ static int sfp_sm_mod_probe(struct sfp *sfp)
if (ret < 0)
return ret;
- ret = sfp_module_insert(sfp->sfp_bus, &sfp->id);
- if (ret < 0)
- return ret;
-
return 0;
}
static void sfp_sm_mod_remove(struct sfp *sfp)
{
- sfp_module_remove(sfp->sfp_bus);
+ if (sfp->sm_mod_state > SFP_MOD_WAITDEV)
+ sfp_module_remove(sfp->sfp_bus);
sfp_hwmon_remove(sfp);
@@ -1541,12 +1540,12 @@ static void sfp_sm_module(struct sfp *sfp, unsigned int event)
}
/* Handle device detach globally */
- if (sfp->sm_dev_state < SFP_DEV_DOWN) {
+ if (sfp->sm_dev_state < SFP_DEV_DOWN &&
+ sfp->sm_mod_state > SFP_MOD_WAITDEV) {
if (sfp->module_power_mW > 1000 &&
sfp->sm_mod_state > SFP_MOD_HPOWER)
sfp_sm_mod_hpower(sfp, false);
- if (sfp->sm_mod_state > SFP_MOD_EMPTY)
- sfp_sm_mod_next(sfp, SFP_MOD_EMPTY, 0);
+ sfp_sm_mod_next(sfp, SFP_MOD_WAITDEV, 0);
return;
}
@@ -1557,6 +1556,7 @@ static void sfp_sm_module(struct sfp *sfp, unsigned int event)
break;
case SFP_MOD_PROBE:
+ /* Wait for T_PROBE_INIT to time out */
if (event != SFP_E_TIMEOUT)
break;
@@ -1570,6 +1570,20 @@ static void sfp_sm_module(struct sfp *sfp, unsigned int event)
break;
}
+ sfp_sm_mod_next(sfp, SFP_MOD_WAITDEV, 0);
+ /* fall through */
+ case SFP_MOD_WAITDEV:
+ /* Ensure that the device is attached before proceeding */
+ if (sfp->sm_dev_state < SFP_DEV_DOWN)
+ break;
+
+ /* Report the module insertion to the upstream device */
+ err = sfp_module_insert(sfp->sfp_bus, &sfp->id);
+ if (err < 0) {
+ sfp_sm_mod_next(sfp, SFP_MOD_ERROR, 0);
+ break;
+ }
+
/* If this is a power level 1 module, we are done */
if (sfp->module_power_mW <= 1000)
goto insert;
@@ -1579,12 +1593,17 @@ static void sfp_sm_module(struct sfp *sfp, unsigned int event)
case SFP_MOD_HPOWER:
/* Enable high power mode */
err = sfp_sm_mod_hpower(sfp, true);
- if (err == 0)
- sfp_sm_mod_next(sfp, SFP_MOD_WAITPWR, T_HPOWER_LEVEL);
- else if (err != -EAGAIN)
- sfp_sm_mod_next(sfp, SFP_MOD_ERROR, 0);
- else
- sfp_sm_set_timer(sfp, T_PROBE_RETRY);
+ if (err < 0) {
+ if (err != -EAGAIN) {
+ sfp_module_remove(sfp->sfp_bus);
+ sfp_sm_mod_next(sfp, SFP_MOD_ERROR, 0);
+ } else {
+ sfp_sm_set_timer(sfp, T_PROBE_RETRY);
+ }
+ break;
+ }
+
+ sfp_sm_mod_next(sfp, SFP_MOD_WAITPWR, T_HPOWER_LEVEL);
break;
case SFP_MOD_WAITPWR:
@@ -1752,8 +1771,6 @@ static void sfp_sm_event(struct sfp *sfp, unsigned int event)
static void sfp_attach(struct sfp *sfp)
{
sfp_sm_event(sfp, SFP_E_DEV_ATTACH);
- if (sfp->state & SFP_F_PRESENT)
- sfp_sm_event(sfp, SFP_E_INSERT);
}
static void sfp_detach(struct sfp *sfp)
@@ -2021,6 +2038,11 @@ static int sfp_probe(struct platform_device *pdev)
sfp->state |= SFP_F_RATE_SELECT;
sfp_set_state(sfp, sfp->state);
sfp_module_tx_disable(sfp);
+ if (sfp->state & SFP_F_PRESENT) {
+ rtnl_lock();
+ sfp_sm_event(sfp, SFP_E_INSERT);
+ rtnl_unlock();
+ }
for (i = 0; i < GPIO_MAX; i++) {
if (gpio_flags[i] != GPIOD_IN || !sfp->gpio[i])
Move the module insertion reporting out of the probe handling, but after we have detected that the upstream has attached (since that is whom we are reporting insertion to.) Only report module removal if we had previously reported a module insertion. This gives cleaner semantics, and means we can probe the module before we have an upstream attached. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> --- drivers/net/phy/sfp.c | 58 +++++++++++++++++++++++++++++-------------- 1 file changed, 40 insertions(+), 18 deletions(-)