diff mbox series

[v4,1/4] rtl8723ae: Take the FW LPS mode handling out

Message ID AM6PR07MB5608D3B84CFB7EB8A84C2030E48A0@AM6PR07MB5608.eurprd07.prod.outlook.com
State Awaiting Upstream
Delegated to: David Miller
Headers show
Series rtlwifi: Fix issues with rtl8723ae | expand

Commit Message

Bernd Edlinger Jan. 8, 2019, 10:49 p.m. UTC 
This appears to trigger a firmware bug and causes severe
problems with rtl8723ae PCI devices.

When the power save mode is activated for longer periods
of time the firmware stops to receive any packets.

This problem was exposed by commit 873ffe154ae0 ("rtlwifi:
Fix logic error in enter/exit power-save mode").

Previously the power save mode was only active rarely and
only for a short time so that the problem was not noticeable.

Signed-off-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
---
v2: Adjust the defaults of swlps and fwlps module
parameters to match the firmware capabilities instead of removing
the whole code, so it can be easily re-activated once a firmware
update is available.

v3: Make the title fit in one line.

v4: Try to fix the line endings the message body.
---
 drivers/net/wireless/realtek/rtlwifi/rtl8723ae/sw.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

Comments

Kalle Valo Feb. 1, 2019, 12:07 p.m. UTC | #1 
Bernd Edlinger <bernd.edlinger@hotmail.de> wrote:

> This appears to trigger a firmware bug and causes severe
> problems with rtl8723ae PCI devices.
> 
> When the power save mode is activated for longer periods
> of time the firmware stops to receive any packets.
> 
> This problem was exposed by commit 873ffe154ae0 ("rtlwifi:
> Fix logic error in enter/exit power-save mode").
> 
> Previously the power save mode was only active rarely and
> only for a short time so that the problem was not noticeable.
> 
> Signed-off-by: Bernd Edlinger <bernd.edlinger@hotmail.de>

4 patches applied to wireless-drivers-next.git, thanks.

46b87976d7a8 rtl8723ae: Take the FW LPS mode handling out
5bb5385fbf3e rtl8723ae: Dont use old data for input gain control
28484b6b37ba rtl8723ae: Re-introduce the adaptive rate control
051337d412d2 rtlwifi: Don't clear num_rx_inperiod too early
diff mbox series

Patch

diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8723ae/sw.c b/drivers/net/wireless/realtek/rtlwifi/rtl8723ae/sw.c
index 07b82700d1..3103151 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8723ae/sw.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8723ae/sw.c
@@ -266,8 +266,8 @@  static bool is_fw_header(struct rtlwifi_firmware_header *hdr)
 static struct rtl_mod_params rtl8723e_mod_params = {
 	.sw_crypto = false,
 	.inactiveps = true,
-	.swctrl_lps = false,
-	.fwctrl_lps = true,
+	.swctrl_lps = true,
+	.fwctrl_lps = false,
 	.aspm_support = 1,
 	.debug_level = 0,
 	.debug_mask = 0,
@@ -395,8 +395,8 @@  static bool is_fw_header(struct rtlwifi_firmware_header *hdr)
 		   bool, 0444);
 MODULE_PARM_DESC(swenc, "Set to 1 for software crypto (default 0)\n");
 MODULE_PARM_DESC(ips, "Set to 0 to not use link power save (default 1)\n");
-MODULE_PARM_DESC(swlps, "Set to 1 to use SW control power save (default 0)\n");
-MODULE_PARM_DESC(fwlps, "Set to 1 to use FW control power save (default 1)\n");
+MODULE_PARM_DESC(swlps, "Set to 1 to use SW control power save (default 1)\n");
+MODULE_PARM_DESC(fwlps, "Set to 1 to use FW control power save (default 0)\n");
 MODULE_PARM_DESC(msi, "Set to 1 to use MSI interrupts mode (default 0)\n");
 MODULE_PARM_DESC(aspm, "Set to 1 to enable ASPM (default 1)\n");
 MODULE_PARM_DESC(debug_level, "Set debug level (0-5) (default 0)");