| Message ID | 4A9928C9.7000907@ring3k.org |
|---|---|
| State | Not Applicable, archived |
| Delegated to: | David Miller |
| Headers | show |
Mike McCormack wrote:
> There are a few problems with the following line of code in sky2_down()
Apologies, there probably should have been a "next" in that subject line.
Mike
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
On Sat, 29 Aug 2009 22:10:33 +0900 Mike McCormack <mikem@ring3k.org> wrote: > There are a few problems with the following line of code in sky2_down() > > sky2_write16(hw, B0_Y2LED, LED_STAT_OFF); > > * It doesn't specify which port's LED to turn off. > * We don't turn send LED_STAT_ON on in sky2_up() > * B0_LED is 0x0006 in the vendor driver, but 0x0005 in sky2. > B0_LED is right next to B0_POWER_CTRL, so this is possibly > accounts for the device being accidently powered down as > reported by Rene Mayrhofer. I would rather just change the definition of B0_LED to the correct value. -- To unsubscribe from this list: send the line "unsubscribe netdev" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Stephen Hemminger wrote: > On Sat, 29 Aug 2009 22:10:33 +0900 > Mike McCormack <mikem@ring3k.org> wrote: > >> There are a few problems with the following line of code in sky2_down() >> >> sky2_write16(hw, B0_Y2LED, LED_STAT_OFF); >> >> * It doesn't specify which port's LED to turn off. >> * We don't turn send LED_STAT_ON on in sky2_up() >> * B0_LED is 0x0006 in the vendor driver, but 0x0005 in sky2. >> B0_LED is right next to B0_POWER_CTRL, so this is possibly >> accounts for the device being accidently powered down as >> reported by Rene Mayrhofer. > > I would rather just change the definition of B0_LED to the correct value. How does that address the first problem? If there are two ports, which port's LED are we turning off? thanks, Mike -- To unsubscribe from this list: send the line "unsubscribe netdev" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi Mika and Stephen, Am Samstag, 29. August 2009 15:10:33 schrieb Mike McCormack: > There are a few problems with the following line of code in sky2_down() > > sky2_write16(hw, B0_Y2LED, LED_STAT_OFF); > > * It doesn't specify which port's LED to turn off. > * We don't turn send LED_STAT_ON on in sky2_up() > * B0_LED is 0x0006 in the vendor driver, but 0x0005 in sky2. > B0_LED is right next to B0_POWER_CTRL, so this is possibly > accounts for the device being accidently powered down as > reported by Rene Mayrhofer. > > Signed-off-by: Mike McCormack <mikem@ring3k.org> I tried the current net-next version with this patch, and a network restart still leads to a system reset. Is this patch aimed at net-next or the vanilla 2.6.30.5 version? I assume the updated 2 patches would not make any difference, right? best regards, Rene
Am Samstag, 29. August 2009 15:10:33 schrieb Mike McCormack: > There are a few problems with the following line of code in sky2_down() > > sky2_write16(hw, B0_Y2LED, LED_STAT_OFF); > > * It doesn't specify which port's LED to turn off. > * We don't turn send LED_STAT_ON on in sky2_up() > * B0_LED is 0x0006 in the vendor driver, but 0x0005 in sky2. > B0_LED is right next to B0_POWER_CTRL, so this is possibly > accounts for the device being accidently powered down as > reported by Rene Mayrhofer. With this patch applied to the net-next version from Friday, I now got this: [~]# /etc/init.d/networking restart Reconfiguring network interfaces...[ 403.000092] sky2 0000:03:00.0: error interrupt status=0xffffffff [ 403.006905] sky2 0000:03:00.0: PCI hardware error (0xffff) [ 403.013095] sky2 0000:03:00.0: PCI Express error (0xffffffff) [ 403.019586] sky2 dmz: ram data read parity error [ 403.024814] sky2 dmz: ram data write parity error [ 403.030130] sky2 dmz: MAC parity error [ 403.034392] sky2 dmz: RX parity error [ 403.038560] sky2 dmz: TCP segmentation error [ 403.043531] BUG: unable to handle kernel NULL pointer dereference at 0000038d [ 403.047392] IP: [<f8078ce0>] sky2_mac_intr+0x30/0xc1 [sky2] [ 403.047392] *pde = 00000000 [ 403.047392] Thread overran stack, or stack corrupted [ 403.047392] Oops: 0000 [#1] PREEMPT SMP [ 403.047392] last sysfs file: /sys/devices/system/cpu/cpu0/cpufreq/scaling_setspeed [ 403.047392] Modules linked in: xt_multiport cpufreq_userspace ip6t_REJECT xt_DSCP xt_length xt_mark xt_dscp xt_MARK xt_IMQ xt_CONNMARK xt_comment xt_policy ip6t_LOG xt_tcpudp ip6table_mangle iptable_mangle ip6table_filter ip6_tables sit tunnel4 8021q garp stp llc ipt_LOG xt_limit xt_state iptable_nat iptable_filter ip_tables x_tables dm_mod lm90 led_class p4_clockmod speedstep_lib freq_table tun imq nf_nat_ftp nf_nat nf_conntrack_ftp nf_conntrack_ipv6 nf_conntrack_ipv4 nf_conntrack nf_defrag_ipv4 ipv6 evdev iTCO_wdt parport_pc parport i2c_i801 i2c_core serio_raw rng_core button processor intel_agp pcspkr squashfs loop aufs exportfs nls_utf8 nls_cp437 ide_generic sd_mod ata_generic pata_acpi ata_piix ide_pci_generic ide_core skge sky2 thermal fan thermal_sys [ 403.047392] [ 403.047392] Pid: 0, comm: swapper Not tainted (2.6.30.5 #20) [ 403.047392] EIP: 0060:[<f8078ce0>] EFLAGS: 00010286 CPU: 0 [ 403.047392] EIP is at sky2_mac_intr+0x30/0xc1 [sky2] [ 403.047392] EAX: f8098f88 EBX: 00000001 ECX: 00000008 EDX: 000000ff [ 403.047392] ESI: 00000000 EDI: f68f5080 EBP: c1c8de3c ESP: c1c8de24 [ 403.191036] DS: 0068 ES: 0068 FS: 00d8 GS: 00e0 SS: 0068 [ 403.191036] Process swapper (pid: 0, ti=c1c8c000 task=c1c3f1d4 task.ti=c1c8c000) [ 403.202984] Stack: [ 403.202984] 00000080 ff8f5080 4aa8b206 f70e54c0 ffffffff ffffffff c1c8deb0 f807c33b [ 403.202984] 00000000 c1c8dea4 00000040 f68f5088 c184526c 00000000 f68f5080 ffffffff [ 403.202984] 00000001 f7224400 c2523140 00006497 00000001 00000000 4aa8b206 c25229c8 [ 403.202984] Call Trace: [ 403.202984] [<f807c33b>] ? sky2_poll+0x1d2/0xa07 [sky2] [ 403.202984] [<c184526c>] ? insert_work+0xa5/0xbf [ 403.202984] [<c1af8f7f>] ? _spin_unlock_irq+0x2f/0x42 [ 403.202984] [<c1a6ebc5>] ? net_rx_action+0x9e/0x1ae [ 403.202984] [<c1838e5e>] ? __do_softirq+0xb2/0x188 [ 403.202984] [<c1838f73>] ? do_softirq+0x3f/0x5c [ 403.202984] [<c18390fd>] ? irq_exit+0x37/0x80 [ 403.202984] [<c18146fa>] ? smp_apic_timer_interrupt+0x7c/0x9b [ 403.202984] [<c1803a31>] ? apic_timer_interrupt+0x31/0x40 [ 403.202984] [<c1840068>] ? complete_signal+0x97/0x1ac [ 403.202984] [<c180a262>] ? mwait_idle+0xad/0x116 [ 403.202984] [<c1801e2f>] ? cpu_idle+0x96/0xc3 [ 403.202984] [<c1ae6629>] ? rest_init+0x75/0x88 [ 403.202984] [<c102aa10>] ? start_kernel+0x32d/0x343 [ 403.202984] [<c102a072>] ? _sinittext+0x72/0x88 [ 403.323244] Code: c7 56 53 89 d3 83 ec 0c 65 a1 14 00 00 00 89 45 f0 31 c0 8b 74 97 3c c1 e2 07 89 d0 05 08 0f 00 00 89 55 e8 03 07 8a 10 88 55 ef <f6> 86 8d 03 00 00 02 74 12 0f b6 c2 50 56 68 74 e3 07 f8 e8 e2 [ 403.323244] EIP: [<f8078ce0>] sky2_mac_intr+0x30/0xc1 [sky2] SS:ESP 0068:c1c8de24 [ 403.323244] CR2: 000000000000038d [ 403.365775] ---[ end trace 7f4d83bf1130e18d ]--- [ 403.370999] Kernel panic - not syncing: Fatal exception in interrupt [ 403.378154] Pid: 0, comm: swapper Tainted: G D 2.6.30.5 #20 [ 403.385185] Call Trace: [ 403.388006] [<c1af5bf7>] ? printk+0x1d/0x30 [ 403.392861] [<c1af5b35>] panic+0x53/0xf8 [ 403.397404] [<c1806787>] oops_end+0x9f/0xbf [ 403.402234] [<c181d7ef>] no_context+0x15d/0x178 [ 403.407443] [<c181db53>] __bad_area_nosemaphore+0x349/0x362 [ 403.413797] [<c197afed>] ? vsnprintf+0x2de/0x332 [ 403.419104] [<c197ada0>] ? vsnprintf+0x91/0x332 [ 403.424312] [<c1af8fc3>] ? _spin_unlock_irqrestore+0x31/0x44 [ 403.430773] [<c1af8fc3>] ? _spin_unlock_irqrestore+0x31/0x44 [ 403.437280] [<c18340f7>] ? release_console_sem+0x18b/0x1c9 [ 403.443583] [<c181db89>] bad_area_nosemaphore+0x1d/0x34 [ 403.449590] [<c181de56>] do_page_fault+0x10d/0x24b [ 403.455119] [<c181dd49>] ? do_page_fault+0x0/0x24b [ 403.460654] [<c1af945d>] error_code+0x7d/0x90 [ 403.465759] [<c1970068>] ? blk_alloc_devt+0x59/0xb9 [ 403.471421] [<f8078ce0>] ? sky2_mac_intr+0x30/0xc1 [sky2] [ 403.477684] [<f807c33b>] sky2_poll+0x1d2/0xa07 [sky2] [ 403.483502] [<c184526c>] ? insert_work+0xa5/0xbf [ 403.488843] [<c1af8f7f>] ? _spin_unlock_irq+0x2f/0x42 [ 403.494664] [<c1a6ebc5>] net_rx_action+0x9e/0x1ae [ 403.500102] [<c1838e5e>] __do_softirq+0xb2/0x188 Message from[ 403.505490] [<c1838f73>] do_softirq+0x3f/0x5c syslogd@gibralt[ 403.511881] [<c18390fd>] irq_exit+0x37/0x80 ar3-esys-master [ 403.518089] [<c18146fa>] smp_apic_timer_interrupt+0x7c/0x9b at Aug 31 11:56:[ 403.525829] [<c1803a31>] apic_timer_interrupt+0x31/0x40 58 ... kernel[ 403.533177] [<c1840068>] ? complete_signal+0x97/0x1ac :[ 403.047392] [ 403.540336] [<c180a262>] ? mwait_idle+0xad/0x116 Oops: 0000 [#1] [ 403.547010] [<c1801e2f>] cpu_idle+0x96/0xc3 PREEMPT SMP [ 403.553229] [<c1ae6629>] rest_init+0x75/0x88 Message from [ 403.559515] [<c102aa10>] start_kernel+0x32d/0x343 syslogd@gibralta[ 403.566324] [<c102a072>] _sinittext+0x72/0x88 r3-esys-master a[ 403.572752] Rebooting in 30 seconds.. Potentially the last system reset was similar but just didn't print the stack trace for some reason (that is, on the previous reboot with the very same sky2.ko loaded, the system just hard-locked and rebooted itself after 30s without printing anything to the serial console). best regards, Rene
diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c index dd630cf..aec8ad3 100644 --- a/drivers/net/sky2.c +++ b/drivers/net/sky2.c @@ -1866,9 +1866,6 @@ static int sky2_down(struct net_device *dev) sky2_phy_power_down(hw, port); spin_unlock_bh(&sky2->phy_lock); - /* turn off LED's */ - sky2_write16(hw, B0_Y2LED, LED_STAT_OFF); - sky2_tx_reset(hw, port); /* Free any pending frames stuck in HW queue */
There are a few problems with the following line of code in sky2_down() sky2_write16(hw, B0_Y2LED, LED_STAT_OFF); * It doesn't specify which port's LED to turn off. * We don't turn send LED_STAT_ON on in sky2_up() * B0_LED is 0x0006 in the vendor driver, but 0x0005 in sky2. B0_LED is right next to B0_POWER_CTRL, so this is possibly accounts for the device being accidently powered down as reported by Rene Mayrhofer. Signed-off-by: Mike McCormack <mikem@ring3k.org> --- drivers/net/sky2.c | 3 --- 1 files changed, 0 insertions(+), 3 deletions(-)