diff mbox series

[net-next,19/19] net: phy: realtek: remove the use of .ack_interrupt()

Message ID 20201029100741.462818-20-ciorneiioana@gmail.com
State Deferred
Delegated to: David Miller
Headers show
Series net: phy: add support for shared interrupts (part 1) | expand

Checks

Context Check Description
jkicinski/cover_letter success Link
jkicinski/fixes_present success Link
jkicinski/patch_count fail Series longer than 15 patches
jkicinski/tree_selection success Clearly marked for net-next
jkicinski/subject_prefix success Link
jkicinski/source_inline success Was 0 now: 0
jkicinski/verify_signedoff success Link
jkicinski/module_param success Was 0 now: 0
jkicinski/build_32bit fail Errors and warnings before: 4 this patch: 4
jkicinski/kdoc success Errors and warnings before: 0 this patch: 0
jkicinski/verify_fixes success Link
jkicinski/checkpatch fail Link
jkicinski/build_allmodconfig_warn success Errors and warnings before: 0 this patch: 0
jkicinski/header_inline success Link
jkicinski/stable success Stable not CCed

Commit Message

Ioana Ciornei Oct. 29, 2020, 10:07 a.m. UTC 
From: Ioana Ciornei <ioana.ciornei@nxp.com>

In preparation of removing the .ack_interrupt() callback, we must replace
its occurrences (aka phy_clear_interrupt), from the 2 places where it is
called from (phy_enable_interrupts and phy_disable_interrupts), with
equivalent functionality.

This means that clearing interrupts now becomes something that the PHY
driver is responsible of doing, before enabling interrupts and after
clearing them. Make this driver follow the new contract.

Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Cc: Willy Liu <willy.liu@realtek.com>
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
---
 drivers/net/phy/realtek.c | 68 ++++++++++++++++++++++++++++++---------
 1 file changed, 52 insertions(+), 16 deletions(-)
diff mbox series

Patch

diff --git a/drivers/net/phy/realtek.c b/drivers/net/phy/realtek.c
index dd77703af1be..d587f84c7380 100644
--- a/drivers/net/phy/realtek.c
+++ b/drivers/net/phy/realtek.c
@@ -102,24 +102,45 @@  static int rtl8211f_ack_interrupt(struct phy_device *phydev)
 static int rtl8201_config_intr(struct phy_device *phydev)
 {
 	u16 val;
+	int err;
+
+	if (phydev->interrupts == PHY_INTERRUPT_ENABLED) {
+		err = rtl8201_ack_interrupt(phydev);
+		if (err)
+			return err;
 
-	if (phydev->interrupts == PHY_INTERRUPT_ENABLED)
 		val = BIT(13) | BIT(12) | BIT(11);
-	else
+		err = phy_write_paged(phydev, 0x7, RTL8201F_IER, val);
+	} else {
 		val = 0;
+		err = phy_write_paged(phydev, 0x7, RTL8201F_IER, val);
+		if (err)
+			return err;
+
+		err = rtl8201_ack_interrupt(phydev);
+	}
 
-	return phy_write_paged(phydev, 0x7, RTL8201F_IER, val);
+	return err;
 }
 
 static int rtl8211b_config_intr(struct phy_device *phydev)
 {
 	int err;
 
-	if (phydev->interrupts == PHY_INTERRUPT_ENABLED)
+	if (phydev->interrupts == PHY_INTERRUPT_ENABLED) {
+		err = rtl821x_ack_interrupt(phydev);
+		if (err)
+			return err;
+
 		err = phy_write(phydev, RTL821x_INER,
 				RTL8211B_INER_INIT);
-	else
+	} else {
 		err = phy_write(phydev, RTL821x_INER, 0);
+		if (err)
+			return err;
+
+		err = rtl821x_ack_interrupt(phydev);
+	}
 
 	return err;
 }
@@ -128,11 +149,20 @@  static int rtl8211e_config_intr(struct phy_device *phydev)
 {
 	int err;
 
-	if (phydev->interrupts == PHY_INTERRUPT_ENABLED)
+	if (phydev->interrupts == PHY_INTERRUPT_ENABLED) {
+		err = rtl821x_ack_interrupt(phydev);
+		if (err)
+			return err;
+
 		err = phy_write(phydev, RTL821x_INER,
 				RTL8211E_INER_LINK_STATUS);
-	else
+	} else {
 		err = phy_write(phydev, RTL821x_INER, 0);
+		if (err)
+			return err;
+
+		err = rtl821x_ack_interrupt(phydev);
+	}
 
 	return err;
 }
@@ -140,13 +170,25 @@  static int rtl8211e_config_intr(struct phy_device *phydev)
 static int rtl8211f_config_intr(struct phy_device *phydev)
 {
 	u16 val;
+	int err;
+
+	if (phydev->interrupts == PHY_INTERRUPT_ENABLED) {
+		err = rtl8211f_ack_interrupt(phydev);
+		if (err)
+			return err;
 
-	if (phydev->interrupts == PHY_INTERRUPT_ENABLED)
 		val = RTL8211F_INER_LINK_STATUS;
-	else
+		err = phy_write_paged(phydev, 0xa42, RTL821x_INER, val);
+	} else {
 		val = 0;
+		err = phy_write_paged(phydev, 0xa42, RTL821x_INER, val);
+		if (err)
+			return err;
 
-	return phy_write_paged(phydev, 0xa42, RTL821x_INER, val);
+		err = rtl8211f_ack_interrupt(phydev);
+	}
+
+	return err;
 }
 
 static irqreturn_t rtl8201_handle_interrupt(struct phy_device *phydev)
@@ -608,7 +650,6 @@  static struct phy_driver realtek_drvs[] = {
 	}, {
 		PHY_ID_MATCH_EXACT(0x001cc816),
 		.name		= "RTL8201F Fast Ethernet",
-		.ack_interrupt	= &rtl8201_ack_interrupt,
 		.config_intr	= &rtl8201_config_intr,
 		.handle_interrupt = rtl8201_handle_interrupt,
 		.suspend	= genphy_suspend,
@@ -635,7 +676,6 @@  static struct phy_driver realtek_drvs[] = {
 	}, {
 		PHY_ID_MATCH_EXACT(0x001cc912),
 		.name		= "RTL8211B Gigabit Ethernet",
-		.ack_interrupt	= &rtl821x_ack_interrupt,
 		.config_intr	= &rtl8211b_config_intr,
 		.handle_interrupt = rtl821x_handle_interrupt,
 		.read_mmd	= &genphy_read_mmd_unsupported,
@@ -655,7 +695,6 @@  static struct phy_driver realtek_drvs[] = {
 	}, {
 		PHY_ID_MATCH_EXACT(0x001cc914),
 		.name		= "RTL8211DN Gigabit Ethernet",
-		.ack_interrupt	= rtl821x_ack_interrupt,
 		.config_intr	= rtl8211e_config_intr,
 		.handle_interrupt = rtl821x_handle_interrupt,
 		.suspend	= genphy_suspend,
@@ -666,7 +705,6 @@  static struct phy_driver realtek_drvs[] = {
 		PHY_ID_MATCH_EXACT(0x001cc915),
 		.name		= "RTL8211E Gigabit Ethernet",
 		.config_init	= &rtl8211e_config_init,
-		.ack_interrupt	= &rtl821x_ack_interrupt,
 		.config_intr	= &rtl8211e_config_intr,
 		.handle_interrupt = rtl821x_handle_interrupt,
 		.suspend	= genphy_suspend,
@@ -677,7 +715,6 @@  static struct phy_driver realtek_drvs[] = {
 		PHY_ID_MATCH_EXACT(0x001cc916),
 		.name		= "RTL8211F Gigabit Ethernet",
 		.config_init	= &rtl8211f_config_init,
-		.ack_interrupt	= &rtl8211f_ack_interrupt,
 		.config_intr	= &rtl8211f_config_intr,
 		.handle_interrupt = rtl8211f_handle_interrupt,
 		.suspend	= genphy_suspend,
@@ -727,7 +764,6 @@  static struct phy_driver realtek_drvs[] = {
 		 * irq is requested and ACKed by reading the status register,
 		 * which is done by the irqchip code.
 		 */
-		.ack_interrupt	= genphy_no_ack_interrupt,
 		.config_intr	= genphy_no_config_intr,
 		.handle_interrupt = genphy_handle_interrupt_no_ack,
 		.suspend	= genphy_suspend,