| Message ID | 20201016134320.20321-7-qiangqing.zhang@nxp.com |
|---|---|
| State | Awaiting Upstream |
| Delegated to: | David Miller |
| Headers | show |
| Series | can: flexcan: add stop mode support for i.MX8QM | expand |
On 10/16/20 3:43 PM, Joakim Zhang wrote: > After double check with Layerscape CAN owner (Pankaj Bansal), confirm > that LS1021A doesn't support ECC, and LX2160A indeed supports ECC. > > For SoCs with ECC supported, even use FLEXCAN_QUIRK_DISABLE_MECR quirk to > disable non-correctable errors interrupt and freeze mode, had better use > FLEXCAN_QUIRK_SUPPORT_ECC quirk to initialize all memory. > > Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com> > --- > drivers/net/can/flexcan.c | 10 +++++----- > 1 file changed, 5 insertions(+), 5 deletions(-) > > diff --git a/drivers/net/can/flexcan.c b/drivers/net/can/flexcan.c > index a55ea8f27f7c..7b0eb608fc9d 100644 > --- a/drivers/net/can/flexcan.c > +++ b/drivers/net/can/flexcan.c > @@ -219,7 +219,7 @@ > * MX8MP FlexCAN3 03.00.17.01 yes yes no yes yes yes > * VF610 FlexCAN3 ? no yes no yes yes? no > * LS1021A FlexCAN2 03.00.04.00 no yes no no yes no > - * LX2160A FlexCAN3 03.00.23.00 no yes no no yes yes > + * LX2160A FlexCAN3 03.00.23.00 no yes no yes yes yes > * > * Some SOCs do not have the RX_WARN & TX_WARN interrupt line connected. > */ > @@ -408,19 +408,19 @@ static struct flexcan_devtype_data fsl_imx8mp_devtype_data = { > static const struct flexcan_devtype_data fsl_vf610_devtype_data = { > .quirks = FLEXCAN_QUIRK_DISABLE_RXFG | FLEXCAN_QUIRK_ENABLE_EACEN_RRS | > FLEXCAN_QUIRK_DISABLE_MECR | FLEXCAN_QUIRK_USE_OFF_TIMESTAMP | > - FLEXCAN_QUIRK_BROKEN_PERR_STATE, > + FLEXCAN_QUIRK_BROKEN_PERR_STATE | FLEXCAN_QUIRK_SUPPORT_ECC, You add the missing ECC init for vf610, but don't mention it in the patch subject nor description. Please make this a seperate patch and add a Fixes: line. > }; > > static const struct flexcan_devtype_data fsl_ls1021a_r2_devtype_data = { > .quirks = FLEXCAN_QUIRK_DISABLE_RXFG | FLEXCAN_QUIRK_ENABLE_EACEN_RRS | > - FLEXCAN_QUIRK_DISABLE_MECR | FLEXCAN_QUIRK_BROKEN_PERR_STATE | > - FLEXCAN_QUIRK_USE_OFF_TIMESTAMP, > + FLEXCAN_QUIRK_BROKEN_PERR_STATE | FLEXCAN_QUIRK_USE_OFF_TIMESTAMP, > }; Please make this a seperate patch, too, along with the Fixes line. > static const struct flexcan_devtype_data fsl_lx2160a_r1_devtype_data = { > .quirks = FLEXCAN_QUIRK_DISABLE_RXFG | FLEXCAN_QUIRK_ENABLE_EACEN_RRS | > FLEXCAN_QUIRK_DISABLE_MECR | FLEXCAN_QUIRK_BROKEN_PERR_STATE | > - FLEXCAN_QUIRK_USE_OFF_TIMESTAMP | FLEXCAN_QUIRK_SUPPORT_FD, > + FLEXCAN_QUIRK_USE_OFF_TIMESTAMP | FLEXCAN_QUIRK_SUPPORT_FD | > + FLEXCAN_QUIRK_SUPPORT_ECC, > }; > > static const struct can_bittiming_const flexcan_bittiming_const = { >
Hi Marc, > -----Original Message----- > From: Marc Kleine-Budde <mkl@pengutronix.de> > Sent: 2020年10月16日 14:05 > To: Joakim Zhang <qiangqing.zhang@nxp.com>; robh+dt@kernel.org; > shawnguo@kernel.org; s.hauer@pengutronix.de > Cc: kernel@pengutronix.de; dl-linux-imx <linux-imx@nxp.com>; Ying Liu > <victor.liu@nxp.com>; Peng Fan <peng.fan@nxp.com>; > linux-can@vger.kernel.org; Pankaj Bansal <pankaj.bansal@nxp.com>; > netdev@vger.kernel.org; devicetree@vger.kernel.org; > linux-kernel@vger.kernel.org > Subject: Re: [PATCH 6/6] can: flexcan: fix ECC function on LS1021A/LX2160A > > On 10/16/20 3:43 PM, Joakim Zhang wrote: > > After double check with Layerscape CAN owner (Pankaj Bansal), confirm > > that LS1021A doesn't support ECC, and LX2160A indeed supports ECC. > > > > For SoCs with ECC supported, even use FLEXCAN_QUIRK_DISABLE_MECR > quirk > > to disable non-correctable errors interrupt and freeze mode, had > > better use FLEXCAN_QUIRK_SUPPORT_ECC quirk to initialize all memory. > > > > Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com> > > --- > > drivers/net/can/flexcan.c | 10 +++++----- > > 1 file changed, 5 insertions(+), 5 deletions(-) > > > > diff --git a/drivers/net/can/flexcan.c b/drivers/net/can/flexcan.c > > index a55ea8f27f7c..7b0eb608fc9d 100644 > > --- a/drivers/net/can/flexcan.c > > +++ b/drivers/net/can/flexcan.c > > @@ -219,7 +219,7 @@ > > * MX8MP FlexCAN3 03.00.17.01 yes yes no > yes yes yes > > * VF610 FlexCAN3 ? no yes no > yes yes? no > > * LS1021A FlexCAN2 03.00.04.00 no yes no > no yes no > > - * LX2160A FlexCAN3 03.00.23.00 no yes no > no yes yes > > + * LX2160A FlexCAN3 03.00.23.00 no yes no > yes yes yes > > * > > * Some SOCs do not have the RX_WARN & TX_WARN interrupt line > connected. > > */ > > @@ -408,19 +408,19 @@ static struct flexcan_devtype_data > > fsl_imx8mp_devtype_data = { static const struct flexcan_devtype_data > fsl_vf610_devtype_data = { > > .quirks = FLEXCAN_QUIRK_DISABLE_RXFG | > FLEXCAN_QUIRK_ENABLE_EACEN_RRS | > > FLEXCAN_QUIRK_DISABLE_MECR | > FLEXCAN_QUIRK_USE_OFF_TIMESTAMP | > > - FLEXCAN_QUIRK_BROKEN_PERR_STATE, > > + FLEXCAN_QUIRK_BROKEN_PERR_STATE | > FLEXCAN_QUIRK_SUPPORT_ECC, > > You add the missing ECC init for vf610, but don't mention it in the patch subject > nor description. Please make this a seperate patch and add a Fixes: line. OK. > > }; > > > > static const struct flexcan_devtype_data fsl_ls1021a_r2_devtype_data = { > > .quirks = FLEXCAN_QUIRK_DISABLE_RXFG | > FLEXCAN_QUIRK_ENABLE_EACEN_RRS | > > - FLEXCAN_QUIRK_DISABLE_MECR | > FLEXCAN_QUIRK_BROKEN_PERR_STATE | > > - FLEXCAN_QUIRK_USE_OFF_TIMESTAMP, > > + FLEXCAN_QUIRK_BROKEN_PERR_STATE | > FLEXCAN_QUIRK_USE_OFF_TIMESTAMP, > > }; > > Please make this a seperate patch, too, along with the Fixes line. OK. Best Regards, Joakim Zhang > > static const struct flexcan_devtype_data fsl_lx2160a_r1_devtype_data = { > > .quirks = FLEXCAN_QUIRK_DISABLE_RXFG | > FLEXCAN_QUIRK_ENABLE_EACEN_RRS | > > FLEXCAN_QUIRK_DISABLE_MECR | > FLEXCAN_QUIRK_BROKEN_PERR_STATE | > > - FLEXCAN_QUIRK_USE_OFF_TIMESTAMP | > FLEXCAN_QUIRK_SUPPORT_FD, > > + FLEXCAN_QUIRK_USE_OFF_TIMESTAMP | > FLEXCAN_QUIRK_SUPPORT_FD | > > + FLEXCAN_QUIRK_SUPPORT_ECC, > > }; > > > > static const struct can_bittiming_const flexcan_bittiming_const = { > > > > > -- > Pengutronix e.K. | Marc Kleine-Budde | > Embedded Linux | https://www.pengutronix.de | > Vertretung West/Dortmund | Phone: +49-231-2826-924 | > Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
diff --git a/drivers/net/can/flexcan.c b/drivers/net/can/flexcan.c index a55ea8f27f7c..7b0eb608fc9d 100644 --- a/drivers/net/can/flexcan.c +++ b/drivers/net/can/flexcan.c @@ -219,7 +219,7 @@ * MX8MP FlexCAN3 03.00.17.01 yes yes no yes yes yes * VF610 FlexCAN3 ? no yes no yes yes? no * LS1021A FlexCAN2 03.00.04.00 no yes no no yes no - * LX2160A FlexCAN3 03.00.23.00 no yes no no yes yes + * LX2160A FlexCAN3 03.00.23.00 no yes no yes yes yes * * Some SOCs do not have the RX_WARN & TX_WARN interrupt line connected. */ @@ -408,19 +408,19 @@ static struct flexcan_devtype_data fsl_imx8mp_devtype_data = { static const struct flexcan_devtype_data fsl_vf610_devtype_data = { .quirks = FLEXCAN_QUIRK_DISABLE_RXFG | FLEXCAN_QUIRK_ENABLE_EACEN_RRS | FLEXCAN_QUIRK_DISABLE_MECR | FLEXCAN_QUIRK_USE_OFF_TIMESTAMP | - FLEXCAN_QUIRK_BROKEN_PERR_STATE, + FLEXCAN_QUIRK_BROKEN_PERR_STATE | FLEXCAN_QUIRK_SUPPORT_ECC, }; static const struct flexcan_devtype_data fsl_ls1021a_r2_devtype_data = { .quirks = FLEXCAN_QUIRK_DISABLE_RXFG | FLEXCAN_QUIRK_ENABLE_EACEN_RRS | - FLEXCAN_QUIRK_DISABLE_MECR | FLEXCAN_QUIRK_BROKEN_PERR_STATE | - FLEXCAN_QUIRK_USE_OFF_TIMESTAMP, + FLEXCAN_QUIRK_BROKEN_PERR_STATE | FLEXCAN_QUIRK_USE_OFF_TIMESTAMP, }; static const struct flexcan_devtype_data fsl_lx2160a_r1_devtype_data = { .quirks = FLEXCAN_QUIRK_DISABLE_RXFG | FLEXCAN_QUIRK_ENABLE_EACEN_RRS | FLEXCAN_QUIRK_DISABLE_MECR | FLEXCAN_QUIRK_BROKEN_PERR_STATE | - FLEXCAN_QUIRK_USE_OFF_TIMESTAMP | FLEXCAN_QUIRK_SUPPORT_FD, + FLEXCAN_QUIRK_USE_OFF_TIMESTAMP | FLEXCAN_QUIRK_SUPPORT_FD | + FLEXCAN_QUIRK_SUPPORT_ECC, }; static const struct can_bittiming_const flexcan_bittiming_const = {
After double check with Layerscape CAN owner (Pankaj Bansal), confirm that LS1021A doesn't support ECC, and LX2160A indeed supports ECC. For SoCs with ECC supported, even use FLEXCAN_QUIRK_DISABLE_MECR quirk to disable non-correctable errors interrupt and freeze mode, had better use FLEXCAN_QUIRK_SUPPORT_ECC quirk to initialize all memory. Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com> --- drivers/net/can/flexcan.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-)