| Message ID | 20201015124917.8168-2-i.mikhaylov@yadro.com |
|---|---|
| State | Changes Requested |
| Delegated to: | David Miller |
| Headers | show |
| Series | add ast2400/2500 phy-handle support | expand |
On Thu, Oct 15, 2020 at 03:49:16PM +0300, Ivan Mikhaylov wrote: > Split MDIO registration and PHY connect into ftgmac100_setup_mdio and > ftgmac100_mii_probe. > > Signed-off-by: Ivan Mikhaylov <i.mikhaylov@yadro.com> > --- > drivers/net/ethernet/faraday/ftgmac100.c | 92 ++++++++++++------------ > 1 file changed, 47 insertions(+), 45 deletions(-) > > diff --git a/drivers/net/ethernet/faraday/ftgmac100.c b/drivers/net/ethernet/faraday/ftgmac100.c > index 87236206366f..6997e121824b 100644 > --- a/drivers/net/ethernet/faraday/ftgmac100.c > +++ b/drivers/net/ethernet/faraday/ftgmac100.c > @@ -1044,11 +1044,47 @@ static void ftgmac100_adjust_link(struct net_device *netdev) > schedule_work(&priv->reset_task); > } > > -static int ftgmac100_mii_probe(struct ftgmac100 *priv, phy_interface_t intf) > +static int ftgmac100_mii_probe(struct net_device *netdev) > { > - struct net_device *netdev = priv->netdev; > + struct ftgmac100 *priv = netdev_priv(netdev); > + struct platform_device *pdev = to_platform_device(priv->dev); > + struct device_node *np = pdev->dev.of_node; > + phy_interface_t phy_intf = PHY_INTERFACE_MODE_RGMII; > struct phy_device *phydev; Reverse Christmas tree. > > + /* Get PHY mode from device-tree */ > + if (np) { > + /* Default to RGMII. It's a gigabit part after all */ > + phy_intf = of_get_phy_mode(np, &phy_intf); > + if (phy_intf < 0) > + phy_intf = PHY_INTERFACE_MODE_RGMII; I know you are just moving code around, but it is better to do: > + err = of_get_phy_mode(np, &phy_intf); > + if (err) > + phy_intf = PHY_INTERFACE_MODE_RGMII; With the code you have, you are probably going to get an email about assigning an int to an unsigned int type from Colin.. > @@ -1860,6 +1854,14 @@ static int ftgmac100_probe(struct platform_device *pdev) > err = ftgmac100_setup_mdio(netdev); > if (err) > goto err_setup_mdio; > + > + err = ftgmac100_mii_probe(netdev); > + if (err) { > + dev_err(priv->dev, "MII probe failed!\n"); > + mdiobus_unregister(priv->mii_bus); > + goto err_setup_mdio; > + } It is more uniform to add a new label and add the mdiobus_unregister(priv->mii_bus) there. All the other error handling works like that. Andrew
On Thu, 2020-10-15 at 15:49 +0300, Ivan Mikhaylov wrote: > Split MDIO registration and PHY connect into ftgmac100_setup_mdio and > ftgmac100_mii_probe. Please keep me CCod on ftgmac100 patches. > Signed-off-by: Ivan Mikhaylov <i.mikhaylov@yadro.com> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> > --- > drivers/net/ethernet/faraday/ftgmac100.c | 92 ++++++++++++------------ > 1 file changed, 47 insertions(+), 45 deletions(-) > > diff --git a/drivers/net/ethernet/faraday/ftgmac100.c b/drivers/net/ethernet/faraday/ftgmac100.c > index 87236206366f..6997e121824b 100644 > --- a/drivers/net/ethernet/faraday/ftgmac100.c > +++ b/drivers/net/ethernet/faraday/ftgmac100.c > @@ -1044,11 +1044,47 @@ static void ftgmac100_adjust_link(struct net_device *netdev) > schedule_work(&priv->reset_task); > } > > -static int ftgmac100_mii_probe(struct ftgmac100 *priv, phy_interface_t intf) > +static int ftgmac100_mii_probe(struct net_device *netdev) > { > - struct net_device *netdev = priv->netdev; > + struct ftgmac100 *priv = netdev_priv(netdev); > + struct platform_device *pdev = to_platform_device(priv->dev); > + struct device_node *np = pdev->dev.of_node; > + phy_interface_t phy_intf = PHY_INTERFACE_MODE_RGMII; > struct phy_device *phydev; > > + /* Get PHY mode from device-tree */ > + if (np) { > + /* Default to RGMII. It's a gigabit part after all */ > + phy_intf = of_get_phy_mode(np, &phy_intf); > + if (phy_intf < 0) > + phy_intf = PHY_INTERFACE_MODE_RGMII; > + > + /* Aspeed only supports these. I don't know about other IP > + * block vendors so I'm going to just let them through for > + * now. Note that this is only a warning if for some obscure > + * reason the DT really means to lie about it or it's a newer > + * part we don't know about. > + * > + * On the Aspeed SoC there are additionally straps and SCU > + * control bits that could tell us what the interface is > + * (or allow us to configure it while the IP block is held > + * in reset). For now I chose to keep this driver away from > + * those SoC specific bits and assume the device-tree is > + * right and the SCU has been configured properly by pinmux > + * or the firmware. > + */ > + if (priv->is_aspeed && > + phy_intf != PHY_INTERFACE_MODE_RMII && > + phy_intf != PHY_INTERFACE_MODE_RGMII && > + phy_intf != PHY_INTERFACE_MODE_RGMII_ID && > + phy_intf != PHY_INTERFACE_MODE_RGMII_RXID && > + phy_intf != PHY_INTERFACE_MODE_RGMII_TXID) { > + netdev_warn(netdev, > + "Unsupported PHY mode %s !\n", > + phy_modes(phy_intf)); > + } > + } > + > phydev = phy_find_first(priv->mii_bus); > if (!phydev) { > netdev_info(netdev, "%s: no PHY found\n", netdev->name); > @@ -1056,7 +1092,7 @@ static int ftgmac100_mii_probe(struct ftgmac100 *priv, phy_interface_t intf) > } > > phydev = phy_connect(netdev, phydev_name(phydev), > - &ftgmac100_adjust_link, intf); > + &ftgmac100_adjust_link, phy_intf); > > if (IS_ERR(phydev)) { > netdev_err(netdev, "%s: Could not attach to PHY\n", netdev->name); > @@ -1601,7 +1637,6 @@ static int ftgmac100_setup_mdio(struct net_device *netdev) > { > struct ftgmac100 *priv = netdev_priv(netdev); > struct platform_device *pdev = to_platform_device(priv->dev); > - phy_interface_t phy_intf = PHY_INTERFACE_MODE_RGMII; > struct device_node *np = pdev->dev.of_node; > int i, err = 0; > u32 reg; > @@ -1623,39 +1658,6 @@ static int ftgmac100_setup_mdio(struct net_device *netdev) > iowrite32(reg, priv->base + FTGMAC100_OFFSET_REVR); > } > > - /* Get PHY mode from device-tree */ > - if (np) { > - /* Default to RGMII. It's a gigabit part after all */ > - err = of_get_phy_mode(np, &phy_intf); > - if (err) > - phy_intf = PHY_INTERFACE_MODE_RGMII; > - > - /* Aspeed only supports these. I don't know about other IP > - * block vendors so I'm going to just let them through for > - * now. Note that this is only a warning if for some obscure > - * reason the DT really means to lie about it or it's a newer > - * part we don't know about. > - * > - * On the Aspeed SoC there are additionally straps and SCU > - * control bits that could tell us what the interface is > - * (or allow us to configure it while the IP block is held > - * in reset). For now I chose to keep this driver away from > - * those SoC specific bits and assume the device-tree is > - * right and the SCU has been configured properly by pinmux > - * or the firmware. > - */ > - if (priv->is_aspeed && > - phy_intf != PHY_INTERFACE_MODE_RMII && > - phy_intf != PHY_INTERFACE_MODE_RGMII && > - phy_intf != PHY_INTERFACE_MODE_RGMII_ID && > - phy_intf != PHY_INTERFACE_MODE_RGMII_RXID && > - phy_intf != PHY_INTERFACE_MODE_RGMII_TXID) { > - netdev_warn(netdev, > - "Unsupported PHY mode %s !\n", > - phy_modes(phy_intf)); > - } > - } > - > priv->mii_bus->name = "ftgmac100_mdio"; > snprintf(priv->mii_bus->id, MII_BUS_ID_SIZE, "%s-%d", > pdev->name, pdev->id); > @@ -1673,16 +1675,8 @@ static int ftgmac100_setup_mdio(struct net_device *netdev) > goto err_register_mdiobus; > } > > - err = ftgmac100_mii_probe(priv, phy_intf); > - if (err) { > - dev_err(priv->dev, "MII Probe failed!\n"); > - goto err_mii_probe; > - } > - > return 0; > > -err_mii_probe: > - mdiobus_unregister(priv->mii_bus); > err_register_mdiobus: > mdiobus_free(priv->mii_bus); > return err; > @@ -1860,6 +1854,14 @@ static int ftgmac100_probe(struct platform_device *pdev) > err = ftgmac100_setup_mdio(netdev); > if (err) > goto err_setup_mdio; > + > + err = ftgmac100_mii_probe(netdev); > + if (err) { > + dev_err(priv->dev, "MII probe failed!\n"); > + mdiobus_unregister(priv->mii_bus); > + goto err_setup_mdio; > + } > + > } > > if (priv->is_aspeed) {
diff --git a/drivers/net/ethernet/faraday/ftgmac100.c b/drivers/net/ethernet/faraday/ftgmac100.c index 87236206366f..6997e121824b 100644 --- a/drivers/net/ethernet/faraday/ftgmac100.c +++ b/drivers/net/ethernet/faraday/ftgmac100.c @@ -1044,11 +1044,47 @@ static void ftgmac100_adjust_link(struct net_device *netdev) schedule_work(&priv->reset_task); } -static int ftgmac100_mii_probe(struct ftgmac100 *priv, phy_interface_t intf) +static int ftgmac100_mii_probe(struct net_device *netdev) { - struct net_device *netdev = priv->netdev; + struct ftgmac100 *priv = netdev_priv(netdev); + struct platform_device *pdev = to_platform_device(priv->dev); + struct device_node *np = pdev->dev.of_node; + phy_interface_t phy_intf = PHY_INTERFACE_MODE_RGMII; struct phy_device *phydev; + /* Get PHY mode from device-tree */ + if (np) { + /* Default to RGMII. It's a gigabit part after all */ + phy_intf = of_get_phy_mode(np, &phy_intf); + if (phy_intf < 0) + phy_intf = PHY_INTERFACE_MODE_RGMII; + + /* Aspeed only supports these. I don't know about other IP + * block vendors so I'm going to just let them through for + * now. Note that this is only a warning if for some obscure + * reason the DT really means to lie about it or it's a newer + * part we don't know about. + * + * On the Aspeed SoC there are additionally straps and SCU + * control bits that could tell us what the interface is + * (or allow us to configure it while the IP block is held + * in reset). For now I chose to keep this driver away from + * those SoC specific bits and assume the device-tree is + * right and the SCU has been configured properly by pinmux + * or the firmware. + */ + if (priv->is_aspeed && + phy_intf != PHY_INTERFACE_MODE_RMII && + phy_intf != PHY_INTERFACE_MODE_RGMII && + phy_intf != PHY_INTERFACE_MODE_RGMII_ID && + phy_intf != PHY_INTERFACE_MODE_RGMII_RXID && + phy_intf != PHY_INTERFACE_MODE_RGMII_TXID) { + netdev_warn(netdev, + "Unsupported PHY mode %s !\n", + phy_modes(phy_intf)); + } + } + phydev = phy_find_first(priv->mii_bus); if (!phydev) { netdev_info(netdev, "%s: no PHY found\n", netdev->name); @@ -1056,7 +1092,7 @@ static int ftgmac100_mii_probe(struct ftgmac100 *priv, phy_interface_t intf) } phydev = phy_connect(netdev, phydev_name(phydev), - &ftgmac100_adjust_link, intf); + &ftgmac100_adjust_link, phy_intf); if (IS_ERR(phydev)) { netdev_err(netdev, "%s: Could not attach to PHY\n", netdev->name); @@ -1601,7 +1637,6 @@ static int ftgmac100_setup_mdio(struct net_device *netdev) { struct ftgmac100 *priv = netdev_priv(netdev); struct platform_device *pdev = to_platform_device(priv->dev); - phy_interface_t phy_intf = PHY_INTERFACE_MODE_RGMII; struct device_node *np = pdev->dev.of_node; int i, err = 0; u32 reg; @@ -1623,39 +1658,6 @@ static int ftgmac100_setup_mdio(struct net_device *netdev) iowrite32(reg, priv->base + FTGMAC100_OFFSET_REVR); } - /* Get PHY mode from device-tree */ - if (np) { - /* Default to RGMII. It's a gigabit part after all */ - err = of_get_phy_mode(np, &phy_intf); - if (err) - phy_intf = PHY_INTERFACE_MODE_RGMII; - - /* Aspeed only supports these. I don't know about other IP - * block vendors so I'm going to just let them through for - * now. Note that this is only a warning if for some obscure - * reason the DT really means to lie about it or it's a newer - * part we don't know about. - * - * On the Aspeed SoC there are additionally straps and SCU - * control bits that could tell us what the interface is - * (or allow us to configure it while the IP block is held - * in reset). For now I chose to keep this driver away from - * those SoC specific bits and assume the device-tree is - * right and the SCU has been configured properly by pinmux - * or the firmware. - */ - if (priv->is_aspeed && - phy_intf != PHY_INTERFACE_MODE_RMII && - phy_intf != PHY_INTERFACE_MODE_RGMII && - phy_intf != PHY_INTERFACE_MODE_RGMII_ID && - phy_intf != PHY_INTERFACE_MODE_RGMII_RXID && - phy_intf != PHY_INTERFACE_MODE_RGMII_TXID) { - netdev_warn(netdev, - "Unsupported PHY mode %s !\n", - phy_modes(phy_intf)); - } - } - priv->mii_bus->name = "ftgmac100_mdio"; snprintf(priv->mii_bus->id, MII_BUS_ID_SIZE, "%s-%d", pdev->name, pdev->id); @@ -1673,16 +1675,8 @@ static int ftgmac100_setup_mdio(struct net_device *netdev) goto err_register_mdiobus; } - err = ftgmac100_mii_probe(priv, phy_intf); - if (err) { - dev_err(priv->dev, "MII Probe failed!\n"); - goto err_mii_probe; - } - return 0; -err_mii_probe: - mdiobus_unregister(priv->mii_bus); err_register_mdiobus: mdiobus_free(priv->mii_bus); return err; @@ -1860,6 +1854,14 @@ static int ftgmac100_probe(struct platform_device *pdev) err = ftgmac100_setup_mdio(netdev); if (err) goto err_setup_mdio; + + err = ftgmac100_mii_probe(netdev); + if (err) { + dev_err(priv->dev, "MII probe failed!\n"); + mdiobus_unregister(priv->mii_bus); + goto err_setup_mdio; + } + } if (priv->is_aspeed) {
Split MDIO registration and PHY connect into ftgmac100_setup_mdio and ftgmac100_mii_probe. Signed-off-by: Ivan Mikhaylov <i.mikhaylov@yadro.com> --- drivers/net/ethernet/faraday/ftgmac100.c | 92 ++++++++++++------------ 1 file changed, 47 insertions(+), 45 deletions(-)