@@ -39,7 +39,7 @@ obj-$(CONFIG_MDIO_BUS_MUX_MULTIPLEXER) += mdio-mux-multiplexer.o
obj-$(CONFIG_MDIO_CAVIUM) += mdio-cavium.o
obj-$(CONFIG_MDIO_GPIO) += mdio-gpio.o
obj-$(CONFIG_MDIO_HISI_FEMAC) += mdio-hisi-femac.o
-obj-$(CONFIG_MDIO_I2C) += mdio-i2c.o
+obj-$(CONFIG_MDIO_I2C) += mdio-i2c.o mdio-i2c-rollball.o
obj-$(CONFIG_MDIO_IPQ4019) += mdio-ipq4019.o
obj-$(CONFIG_MDIO_IPQ8064) += mdio-ipq8064.o
obj-$(CONFIG_MDIO_MOXART) += mdio-moxart.o
new file mode 100644
@@ -0,0 +1,238 @@
+// SPDX-License-Identifier: GPL-2.0
+/* MDIO I2C bridge for RollBall compatible SFPs
+ *
+ * Copyright (C) 2020 Marek Behun <marek.behun@nic.cz>
+ *
+ * RollBall compatible SFPs expose their internal PHY in a different way
+ * from the one handled by mdio-i2c.c. This driver exposes interface for
+ * this RollBall interface.
+ */
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/phy.h>
+#include <linux/sfp.h>
+
+#include "mdio-i2c.h"
+
+/* RollBall SFPs do not access internal PHY via I2C address 0x56, but
+ * instead via address 0x51, when SFP page is set to 0x03 and password to
+ * 0xffffffff:
+ *
+ * address size contents description
+ * ------- ---- -------- -----------
+ * 0x80 1 CMD 0x01/0x02/0x04 for write/read/done
+ * 0x81 1 DEV Clause 45 device
+ * 0x82 2 REG Clause 45 register
+ * 0x84 2 VAL Register value
+ */
+#define SFP_DIAG_I2C_ADDR 0x51
+
+#define ROLLBALL_SFP_PASSWORD_ADDR 0x7b
+
+#define ROLLBALL_SFP_MDIO_PAGE 0x03
+
+#define ROLLBALL_CMD_ADDR 0x80
+#define ROLLBALL_DATA_ADDR 0x81
+
+#define ROLLBALL_CMD_WRITE 0x01
+#define ROLLBALL_CMD_READ 0x02
+#define ROLLBALL_CMD_DONE 0x04
+
+static int i2c_rollball_mii_poll(struct mii_bus *bus, u8 *buf, size_t len)
+{
+ struct i2c_adapter *i2c = bus->priv;
+ struct i2c_msg msgs[2];
+ u8 buf0[2], *res;
+ int i, ret;
+
+ buf0[0] = ROLLBALL_CMD_ADDR;
+
+ msgs[0].addr = SFP_DIAG_I2C_ADDR;
+ msgs[0].flags = 0;
+ msgs[0].len = 1;
+ msgs[0].buf = &buf0[0];
+
+ res = buf ? buf : &buf0[1];
+
+ msgs[1].addr = SFP_DIAG_I2C_ADDR;
+ msgs[1].flags = I2C_M_RD;
+ msgs[1].len = buf ? len : 1;
+ msgs[1].buf = res;
+
+ /* It takes up to 70 ms to access a register for these SFPs. */
+ i = 10;
+ do {
+ msleep(20);
+
+ ret = i2c_transfer(i2c, msgs, ARRAY_SIZE(msgs));
+ if (ret < 0)
+ return ret;
+ else if (ret != ARRAY_SIZE(msgs))
+ return -EIO;
+
+ if (*res == ROLLBALL_CMD_DONE)
+ return 0;
+ } while (i-- > 0);
+
+ dev_dbg(&bus->dev, "poll timed out\n");
+
+ return -ETIMEDOUT;
+}
+
+static int i2c_rollball_mii_cmd(struct mii_bus *bus, u8 cmd, u8 *data, size_t len)
+{
+ struct i2c_adapter *i2c = bus->priv;
+ struct i2c_msg msgs[2];
+ u8 cmdbuf[2];
+ int ret;
+
+ msgs[0].addr = SFP_DIAG_I2C_ADDR;
+ msgs[0].flags = 0;
+ msgs[0].len = len;
+ msgs[0].buf = data;
+
+ cmdbuf[0] = ROLLBALL_CMD_ADDR;
+ cmdbuf[1] = cmd;
+
+ msgs[1].addr = SFP_DIAG_I2C_ADDR;
+ msgs[1].flags = 0;
+ msgs[1].len = sizeof(cmdbuf);
+ msgs[1].buf = cmdbuf;
+
+ ret = i2c_transfer(i2c, msgs, 2);
+ if (ret < 0)
+ return ret;
+
+ return ret == ARRAY_SIZE(msgs) ? 0 : -EIO;
+}
+
+static int i2c_rollball_mii_read(struct mii_bus *bus, int phy_id, int reg)
+{
+ u8 buf[4], res[6];
+ u16 val;
+ int ret;
+
+ if (phy_id != SFP_PHY_ADDR)
+ return 0xffff;
+
+ if (!(reg & MII_ADDR_C45))
+ return -EOPNOTSUPP;
+
+ buf[0] = ROLLBALL_DATA_ADDR;
+ buf[1] = (reg >> 16) & 0x1f;
+ buf[2] = (reg >> 8) & 0xff;
+ buf[3] = reg & 0xff;
+
+ ret = i2c_rollball_mii_cmd(bus, ROLLBALL_CMD_READ, buf, sizeof(buf));
+ if (ret < 0)
+ return ret;
+
+ ret = i2c_rollball_mii_poll(bus, res, sizeof(res));
+ if (ret == -ETIMEDOUT)
+ return 0xffff;
+ else if (ret < 0)
+ return ret;
+
+ val = res[4];
+ val <<= 8;
+ val |= res[5];
+
+ dev_dbg(&bus->dev, "read reg %02x:%04x = %04x\n", (reg >> 16) & 0x1f, reg & 0xffff, val);
+
+ return val;
+}
+
+static int i2c_rollball_mii_write(struct mii_bus *bus, int phy_id, int reg, u16 val)
+{
+ u8 buf[6];
+ int ret;
+
+ if (phy_id != SFP_PHY_ADDR)
+ return 0;
+
+ if (!(reg & MII_ADDR_C45))
+ return -EOPNOTSUPP;
+
+ buf[0] = ROLLBALL_DATA_ADDR;
+ buf[1] = (reg >> 16) & 0x1f;
+ buf[2] = (reg >> 8) & 0xff;
+ buf[3] = reg & 0xff;
+ buf[4] = val >> 8;
+ buf[5] = val & 0xff;
+
+ ret = i2c_rollball_mii_cmd(bus, ROLLBALL_CMD_WRITE, buf, sizeof(buf));
+ if (ret < 0)
+ return ret;
+
+ ret = i2c_rollball_mii_poll(bus, NULL, 0);
+ if (ret < 0)
+ return ret;
+
+ dev_dbg(&bus->dev, "write reg %02x:%04x = %04x\n", (reg >> 16) & 0x1f, reg & 0xffff, val);
+
+ return 0;
+}
+
+static int i2c_rollball_init(struct i2c_adapter *i2c)
+{
+ struct i2c_msg msgs[2];
+ u8 page[2], password[5];
+ int ret;
+
+ page[0] = SFP_PAGE;
+ page[1] = ROLLBALL_SFP_MDIO_PAGE;
+
+ msgs[0].addr = SFP_DIAG_I2C_ADDR;
+ msgs[0].flags = 0;
+ msgs[0].len = sizeof(page);
+ msgs[0].buf = page;
+
+ password[0] = ROLLBALL_SFP_PASSWORD_ADDR;
+ password[1] = 0xff;
+ password[2] = 0xff;
+ password[3] = 0xff;
+ password[4] = 0xff;
+
+ msgs[1].addr = SFP_DIAG_I2C_ADDR;
+ msgs[1].flags = 0;
+ msgs[1].len = sizeof(password);
+ msgs[1].buf = password;
+
+ ret = i2c_transfer(i2c, msgs, ARRAY_SIZE(msgs));
+ if (ret < 0)
+ return ret;
+
+ return ret == ARRAY_SIZE(msgs) ? 0 : -EIO;
+}
+
+struct mii_bus *mdio_i2c_rollball_alloc(struct device *parent, struct i2c_adapter *i2c)
+{
+ struct mii_bus *mii;
+ int ret;
+
+ if (!i2c_check_functionality(i2c, I2C_FUNC_I2C))
+ return ERR_PTR(-EINVAL);
+
+ mii = mdiobus_alloc();
+ if (!mii)
+ return ERR_PTR(-ENOMEM);
+
+ ret = i2c_rollball_init(i2c);
+ if (ret < 0) {
+ dev_err(parent, "cannot initialize SFP for MDIO access\n");
+ return ERR_PTR(ret);
+ }
+
+ snprintf(mii->id, MII_BUS_ID_SIZE, "i2c-rollball:%s", dev_name(parent));
+ mii->parent = parent;
+ mii->read = i2c_rollball_mii_read;
+ mii->write = i2c_rollball_mii_write;
+ mii->priv = i2c;
+
+ return mii;
+}
+EXPORT_SYMBOL_GPL(mdio_i2c_rollball_alloc);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("MDIO I2C bridge library for RollBall compatible SFPs");
+MODULE_AUTHOR("Marek Behun <marek.behun@nic.cz>");
@@ -12,5 +12,6 @@ struct i2c_adapter;
struct mii_bus;
struct mii_bus *mdio_i2c_alloc(struct device *parent, struct i2c_adapter *i2c);
+struct mii_bus *mdio_i2c_rollball_alloc(struct device *parent, struct i2c_adapter *i2c);
#endif
@@ -202,11 +202,6 @@ static const enum gpiod_flags gpio_flags[] = {
#define T_PROBE_RETRY_SLOW msecs_to_jiffies(5000)
#define R_PROBE_RETRY_SLOW 12
-/* SFP modules appear to always have their PHY configured for bus address
- * 0x56 (which with mdio-i2c, translates to a PHY address of 22).
- */
-#define SFP_PHY_ADDR 22
-
struct sff_data {
unsigned int gpios;
bool (*module_supported)(const struct sfp_eeprom_id *id);
@@ -3,6 +3,11 @@
#include <linux/phy.h>
+/* SFP modules appear to always have their PHY configured for bus address
+ * 0x56 (which with mdio-i2c, translates to a PHY address of 22).
+ */
+#define SFP_PHY_ADDR 22
+
struct sfp_eeprom_base {
u8 phys_id;
u8 phys_ext_id;
Some multigig SFPs from RollBall and Hilink do not expose functional MDIO access to the internal PHY of the SFP via I2C address 0x56 (although there seems to be read-only clause 22 access on this address). Instead these SFPs PHY can be accessed via I2C via the SFP Enhanced Digital Diagnostic Interface - I2C address 0x51. This driver adds support for this as a MDIO bus. Signed-off-by: Marek Behún <marek.behun@nic.cz> --- drivers/net/phy/Makefile | 2 +- drivers/net/phy/mdio-i2c-rollball.c | 238 ++++++++++++++++++++++++++++ drivers/net/phy/mdio-i2c.h | 1 + drivers/net/phy/sfp.c | 5 - include/linux/sfp.h | 5 + 5 files changed, 245 insertions(+), 6 deletions(-) create mode 100644 drivers/net/phy/mdio-i2c-rollball.c