diff mbox series

[v6,bpf-next,2/6] bpf: propagate poke descriptors to subprograms

Message ID 20200731000324.2253-3-maciej.fijalkowski@intel.com
State Accepted
Delegated to: BPF Maintainers
Headers show
Series bpf: tailcalls in BPF subprograms | expand

Commit Message

Maciej Fijalkowski July 31, 2020, 12:03 a.m. UTC
Previously, there was no need for poke descriptors being present in
subprogram's bpf_prog_aux struct since tailcalls were simply not allowed
in them. Each subprog is JITed independently so in order to enable
JITing subprograms that use tailcalls, do the following:

- in fixup_bpf_calls() store the index of tailcall insn onto the generated
  poke descriptor,
- then in jit_subprogs() check whether the given poke descriptor belongs
  to the current subprog by checking if that previously stored absolute
  index of tail call insn is in the scope of the insns of given subprog,
- update the insn->imm with new poke descriptor slot so that while JITing
  the proper poke descriptor will be grabbed

This way each of the main program's poke descriptors are distributed
across the subprograms poke descriptor array, so main program's
descriptors can be untracked out of the prog array map.

Add also subprog's aux struct to the BPF map poke_progs list by calling
on it map_poke_track().

In case of any error, call the map_poke_untrack() on subprog's aux
structs that have already been registered to prog array map.

Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
---
 include/linux/bpf.h   |  1 +
 kernel/bpf/verifier.c | 53 ++++++++++++++++++++++++++++++++++++++++---
 2 files changed, 51 insertions(+), 3 deletions(-)
diff mbox series

Patch

diff --git a/include/linux/bpf.h b/include/linux/bpf.h
index 40c5e206ecf2..8d56b4fba2a6 100644
--- a/include/linux/bpf.h
+++ b/include/linux/bpf.h
@@ -680,6 +680,7 @@  struct bpf_jit_poke_descriptor {
 	bool ip_stable;
 	u8 adj_off;
 	u16 reason;
+	u32 insn_idx;
 };
 
 /* reg_type info for ctx arguments */
diff --git a/kernel/bpf/verifier.c b/kernel/bpf/verifier.c
index b6ccfce3bf4c..96a339e24e93 100644
--- a/kernel/bpf/verifier.c
+++ b/kernel/bpf/verifier.c
@@ -9982,6 +9982,7 @@  static int jit_subprogs(struct bpf_verifier_env *env)
 {
 	struct bpf_prog *prog = env->prog, **func, *tmp;
 	int i, j, subprog_start, subprog_end = 0, len, subprog;
+	struct bpf_map *map_ptr;
 	struct bpf_insn *insn;
 	void *old_bpf_func;
 	int err, num_exentries;
@@ -10049,6 +10050,31 @@  static int jit_subprogs(struct bpf_verifier_env *env)
 		func[i]->aux->btf = prog->aux->btf;
 		func[i]->aux->func_info = prog->aux->func_info;
 
+		for (j = 0; j < prog->aux->size_poke_tab; j++) {
+			u32 insn_idx = prog->aux->poke_tab[j].insn_idx;
+			int ret;
+
+			if (!(insn_idx >= subprog_start &&
+			      insn_idx <= subprog_end))
+				continue;
+
+			ret = bpf_jit_add_poke_descriptor(func[i],
+							  &prog->aux->poke_tab[j]);
+			if (ret < 0) {
+				verbose(env, "adding tail call poke descriptor failed\n");
+				goto out_free;
+			}
+
+			func[i]->insnsi[insn_idx - subprog_start].imm = ret + 1;
+
+			map_ptr = func[i]->aux->poke_tab[ret].tail_call.map;
+			ret = map_ptr->ops->map_poke_track(map_ptr, func[i]->aux);
+			if (ret < 0) {
+				verbose(env, "tracking tail call prog failed\n");
+				goto out_free;
+			}
+		}
+
 		/* Use bpf_prog_F_tag to indicate functions in stack traces.
 		 * Long term would need debug info to populate names
 		 */
@@ -10074,6 +10100,19 @@  static int jit_subprogs(struct bpf_verifier_env *env)
 		}
 		cond_resched();
 	}
+
+	/* Untrack main program's aux structs so that during map_poke_run()
+	 * we will not stumble upon the unfilled poke descriptors; each
+	 * of the main program's poke descs got distributed across subprogs
+	 * and got tracked onto map, so we are sure that none of them will
+	 * be missed after the operation below
+	 */
+	for (i = 0; i < prog->aux->size_poke_tab; i++) {
+		map_ptr = prog->aux->poke_tab[i].tail_call.map;
+
+		map_ptr->ops->map_poke_untrack(map_ptr, prog->aux);
+	}
+
 	/* at this point all bpf functions were successfully JITed
 	 * now populate all bpf_calls with correct addresses and
 	 * run last pass of JIT
@@ -10142,9 +10181,16 @@  static int jit_subprogs(struct bpf_verifier_env *env)
 	bpf_prog_free_unused_jited_linfo(prog);
 	return 0;
 out_free:
-	for (i = 0; i < env->subprog_cnt; i++)
-		if (func[i])
-			bpf_jit_free(func[i]);
+	for (i = 0; i < env->subprog_cnt; i++) {
+		if (!func[i])
+			continue;
+
+		for (j = 0; j < func[i]->aux->size_poke_tab; j++) {
+			map_ptr = func[i]->aux->poke_tab[j].tail_call.map;
+			map_ptr->ops->map_poke_untrack(map_ptr, func[i]->aux);
+		}
+		bpf_jit_free(func[i]);
+	}
 	kfree(func);
 out_undo_insn:
 	/* cleanup main prog to be interpreted */
@@ -10362,6 +10408,7 @@  static int fixup_bpf_calls(struct bpf_verifier_env *env)
 					.reason = BPF_POKE_REASON_TAIL_CALL,
 					.tail_call.map = BPF_MAP_PTR(aux->map_ptr_state),
 					.tail_call.key = bpf_map_key_immediate(aux),
+					.insn_idx = i,
 				};
 
 				ret = bpf_jit_add_poke_descriptor(prog, &desc);