diff mbox series

[bpf-next,v3,11/16] bpf: Sync linux/bpf.h to tools/

Message ID 20200702092416.11961-12-jakub@cloudflare.com
State Changes Requested
Delegated to: BPF Maintainers
Headers show
Series Run a BPF program on socket lookup | expand

Commit Message

Jakub Sitnicki July 2, 2020, 9:24 a.m. UTC
Newly added program, context type and helper is used by tests in a
subsequent patch. Synchronize the header file.

Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
---

Notes:
    v3:
    - Update after changes to bpf.h in earlier patch.
    
    v2:
    - Update after changes to bpf.h in earlier patch.

 tools/include/uapi/linux/bpf.h | 74 ++++++++++++++++++++++++++++++++++
 1 file changed, 74 insertions(+)
diff mbox series

Patch

diff --git a/tools/include/uapi/linux/bpf.h b/tools/include/uapi/linux/bpf.h
index 0cb8ec948816..8dd6e6ce5de9 100644
--- a/tools/include/uapi/linux/bpf.h
+++ b/tools/include/uapi/linux/bpf.h
@@ -189,6 +189,7 @@  enum bpf_prog_type {
 	BPF_PROG_TYPE_STRUCT_OPS,
 	BPF_PROG_TYPE_EXT,
 	BPF_PROG_TYPE_LSM,
+	BPF_PROG_TYPE_SK_LOOKUP,
 };
 
 enum bpf_attach_type {
@@ -226,6 +227,7 @@  enum bpf_attach_type {
 	BPF_CGROUP_INET4_GETSOCKNAME,
 	BPF_CGROUP_INET6_GETSOCKNAME,
 	BPF_XDP_DEVMAP,
+	BPF_SK_LOOKUP,
 	__MAX_BPF_ATTACH_TYPE
 };
 
@@ -3067,6 +3069,10 @@  union bpf_attr {
  *
  * long bpf_sk_assign(struct sk_buff *skb, struct bpf_sock *sk, u64 flags)
  *	Description
+ *		Helper is overloaded depending on BPF program type. This
+ *		description applies to **BPF_PROG_TYPE_SCHED_CLS** and
+ *		**BPF_PROG_TYPE_SCHED_ACT** programs.
+ *
  *		Assign the *sk* to the *skb*. When combined with appropriate
  *		routing configuration to receive the packet towards the socket,
  *		will cause *skb* to be delivered to the specified socket.
@@ -3092,6 +3098,53 @@  union bpf_attr {
  *		**-ESOCKTNOSUPPORT** if the socket type is not supported
  *		(reuseport).
  *
+ * int bpf_sk_assign(struct bpf_sk_lookup *ctx, struct bpf_sock *sk, u64 flags)
+ *	Description
+ *		Helper is overloaded depending on BPF program type. This
+ *		description applies to **BPF_PROG_TYPE_SK_LOOKUP** programs.
+ *
+ *		Select the *sk* as a result of a socket lookup.
+ *
+ *		For the operation to succeed passed socket must be compatible
+ *		with the packet description provided by the *ctx* object.
+ *
+ *		L4 protocol (**IPPROTO_TCP** or **IPPROTO_UDP**) must
+ *		be an exact match. While IP family (**AF_INET** or
+ *		**AF_INET6**) must be compatible, that is IPv6 sockets
+ *		that are not v6-only can be selected for IPv4 packets.
+ *
+ *		Only TCP listeners and UDP unconnected sockets can be
+ *		selected.
+ *
+ *		*flags* argument can combination of following values:
+ *
+ *		* **BPF_SK_LOOKUP_F_REPLACE** to override the previous
+ *		  socket selection, potentially done by a BPF program
+ *		  that ran before us.
+ *
+ *		* **BPF_SK_LOOKUP_F_NO_REUSEPORT** to skip
+ *		  load-balancing within reuseport group for the socket
+ *		  being selected.
+ *
+ *	Return
+ *		0 on success, or a negative errno in case of failure.
+ *
+ *		* **-EAFNOSUPPORT** if socket family (*sk->family*) is
+ *		  not compatible with packet family (*ctx->family*).
+ *
+ *		* **-EEXIST** if socket has been already selected,
+ *		  potentially by another program, and
+ *		  **BPF_SK_LOOKUP_F_REPLACE** flag was not specified.
+ *
+ *		* **-EINVAL** if unsupported flags were specified.
+ *
+ *		* **-EPROTOTYPE** if socket L4 protocol
+ *		  (*sk->protocol*) doesn't match packet protocol
+ *		  (*ctx->protocol*).
+ *
+ *		* **-ESOCKTNOSUPPORT** if socket is not in allowed
+ *		  state (TCP listening or UDP unconnected).
+ *
  * u64 bpf_ktime_get_boot_ns(void)
  * 	Description
  * 		Return the time elapsed since system boot, in nanoseconds.
@@ -3569,6 +3622,12 @@  enum {
 	BPF_RINGBUF_HDR_SZ		= 8,
 };
 
+/* BPF_FUNC_sk_assign flags in bpf_sk_lookup context. */
+enum {
+	BPF_SK_LOOKUP_F_REPLACE		= (1ULL << 0),
+	BPF_SK_LOOKUP_F_NO_REUSEPORT	= (1ULL << 1),
+};
+
 /* Mode for BPF_FUNC_skb_adjust_room helper. */
 enum bpf_adj_room_mode {
 	BPF_ADJ_ROOM_NET,
@@ -4298,4 +4357,19 @@  struct bpf_pidns_info {
 	__u32 pid;
 	__u32 tgid;
 };
+
+/* User accessible data for SK_LOOKUP programs. Add new fields at the end. */
+struct bpf_sk_lookup {
+	__u32 family;		/* Protocol family (AF_INET, AF_INET6) */
+	__u32 protocol;		/* IP protocol (IPPROTO_TCP, IPPROTO_UDP) */
+	__u32 remote_ip4;	/* Network byte order */
+	__u32 remote_ip6[4];	/* Network byte order */
+	__u32 remote_port;	/* Network byte order */
+	__u32 local_ip4;	/* Network byte order */
+	__u32 local_ip6[4];	/* Network byte order */
+	__u32 local_port;	/* Host byte order */
+
+	__bpf_md_ptr(struct bpf_sock *, sk); /* Selected socket */
+};
+
 #endif /* _UAPI__LINUX_BPF_H__ */