diff mbox series

[v3,10/14] net: axienet: Add mii-tool support

Message ID 20200324132347.23709-11-andre.przywara@arm.com
State Accepted
Delegated to: David Miller
Headers show
Series net: axienet: Update error handling and add 64-bit DMA support | expand

Commit Message

Andre Przywara March 24, 2020, 1:23 p.m. UTC 
mii-tool is useful for debugging, and all it requires to work is to wire
up the ioctl ops function pointer.
Add this to the axienet driver to enable mii-tool.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
---
 drivers/net/ethernet/xilinx/xilinx_axienet_main.c | 11 +++++++++++
 1 file changed, 11 insertions(+)

Comments

Andrew Lunn March 24, 2020, 1:43 p.m. UTC | #1 
On Tue, Mar 24, 2020 at 01:23:43PM +0000, Andre Przywara wrote:
> mii-tool is useful for debugging, and all it requires to work is to wire
> up the ioctl ops function pointer.
> Add this to the axienet driver to enable mii-tool.
> 
> Signed-off-by: Andre Przywara <andre.przywara@arm.com>

Reviewed-by: Andrew Lunn <andrew@lunn.ch>

    Andrew
diff mbox series

Patch

diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
index 217f58bed2c5..dc533d7a090c 100644
--- a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
+++ b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
@@ -1171,6 +1171,16 @@  static void axienet_poll_controller(struct net_device *ndev)
 }
 #endif
 
+static int axienet_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
+{
+	struct axienet_local *lp = netdev_priv(dev);
+
+	if (!netif_running(dev))
+		return -EINVAL;
+
+	return phylink_mii_ioctl(lp->phylink, rq, cmd);
+}
+
 static const struct net_device_ops axienet_netdev_ops = {
 	.ndo_open = axienet_open,
 	.ndo_stop = axienet_stop,
@@ -1178,6 +1188,7 @@  static const struct net_device_ops axienet_netdev_ops = {
 	.ndo_change_mtu	= axienet_change_mtu,
 	.ndo_set_mac_address = netdev_set_mac_address,
 	.ndo_validate_addr = eth_validate_addr,
+	.ndo_do_ioctl = axienet_ioctl,
 	.ndo_set_rx_mode = axienet_set_multicast_list,
 #ifdef CONFIG_NET_POLL_CONTROLLER
 	.ndo_poll_controller = axienet_poll_controller,