diff mbox series

[net-next,v2,7/7] net: phy: use phy_read_poll_timeout() to simplify the code

Message ID 20200320133431.9354-8-zhengdejin5@gmail.com
State Superseded
Delegated to: David Miller
Headers show
Series introduce read_poll_timeout | expand

Commit Message

Dejin Zheng March 20, 2020, 1:34 p.m. UTC 
use phy_read_poll_timeout() to replace the poll codes for
simplify the code in phy_poll_reset() function.

Signed-off-by: Dejin Zheng <zhengdejin5@gmail.com>
---
v1 -> v2:
	- remove the handle of phy_read()'s return error.

 drivers/net/phy/phy_device.c | 16 ++++------------
 1 file changed, 4 insertions(+), 12 deletions(-)
diff mbox series

Patch

diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index a585faf8b844..0de4f03ba90c 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -1059,23 +1059,15 @@  EXPORT_SYMBOL(phy_disconnect);
 static int phy_poll_reset(struct phy_device *phydev)
 {
 	/* Poll until the reset bit clears (50ms per retry == 0.6 sec) */
-	unsigned int retries = 12;
-	int ret;
-
-	do {
-		msleep(50);
-		ret = phy_read(phydev, MII_BMCR);
-		if (ret < 0)
-			return ret;
-	} while (ret & BMCR_RESET && --retries);
-	if (ret & BMCR_RESET)
-		return -ETIMEDOUT;
+	int ret, val;
 
+	ret = phy_read_poll_timeout(val, !(val & BMCR_RESET), 50000, 600000,
+				    phydev, MII_BMCR);
 	/* Some chips (smsc911x) may still need up to another 1ms after the
 	 * BMCR_RESET bit is cleared before they are usable.
 	 */
 	msleep(1);
-	return 0;
+	return ret;
 }
 
 int phy_init_hw(struct phy_device *phydev)