diff mbox series

[v4,net,4/5] wireguard: device: use icmp_ndo_send helper

Message ID 20200211194709.723383-5-Jason@zx2c4.com
State Accepted
Delegated to: David Miller
Headers show
Series icmp: account for NAT when sending icmps from ndo layer | expand

Commit Message

Jason A. Donenfeld Feb. 11, 2020, 7:47 p.m. UTC
Because wireguard is calling icmp from network device context, it should
use the ndo helper so that the rate limiting applies correctly.  This
commit adds a small test to the wireguard test suite to ensure that the
new functions continue doing the right thing in the context of
wireguard. It does this by setting up a condition that will definately
evoke an icmp error message from the driver, but along a nat'd path.

Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
---
 drivers/net/wireguard/device.c             |  4 ++--
 tools/testing/selftests/wireguard/netns.sh | 11 +++++++++++
 2 files changed, 13 insertions(+), 2 deletions(-)
diff mbox series

Patch

diff --git a/drivers/net/wireguard/device.c b/drivers/net/wireguard/device.c
index 16b19824b9ad..43db442b1373 100644
--- a/drivers/net/wireguard/device.c
+++ b/drivers/net/wireguard/device.c
@@ -203,9 +203,9 @@  static netdev_tx_t wg_xmit(struct sk_buff *skb, struct net_device *dev)
 err:
 	++dev->stats.tx_errors;
 	if (skb->protocol == htons(ETH_P_IP))
-		icmp_send(skb, ICMP_DEST_UNREACH, ICMP_HOST_UNREACH, 0);
+		icmp_ndo_send(skb, ICMP_DEST_UNREACH, ICMP_HOST_UNREACH, 0);
 	else if (skb->protocol == htons(ETH_P_IPV6))
-		icmpv6_send(skb, ICMPV6_DEST_UNREACH, ICMPV6_ADDR_UNREACH, 0);
+		icmpv6_ndo_send(skb, ICMPV6_DEST_UNREACH, ICMPV6_ADDR_UNREACH, 0);
 	kfree_skb(skb);
 	return ret;
 }
diff --git a/tools/testing/selftests/wireguard/netns.sh b/tools/testing/selftests/wireguard/netns.sh
index f5ab1cda8bb5..138d46b3f330 100755
--- a/tools/testing/selftests/wireguard/netns.sh
+++ b/tools/testing/selftests/wireguard/netns.sh
@@ -24,6 +24,7 @@ 
 set -e
 
 exec 3>&1
+export LANG=C
 export WG_HIDE_KEYS=never
 netns0="wg-test-$$-0"
 netns1="wg-test-$$-1"
@@ -297,7 +298,17 @@  ip1 -4 rule add table main suppress_prefixlength 0
 n1 ping -W 1 -c 100 -f 192.168.99.7
 n1 ping -W 1 -c 100 -f abab::1111
 
+# Have ns2 NAT into wg0 packets from ns0, but return an icmp error along the right route.
+n2 iptables -t nat -A POSTROUTING -s 10.0.0.0/24 -d 192.168.241.0/24 -j SNAT --to 192.168.241.2
+n0 iptables -t filter -A INPUT \! -s 10.0.0.0/24 -i vethrs -j DROP # Manual rpfilter just to be explicit.
+n2 bash -c 'printf 1 > /proc/sys/net/ipv4/ip_forward'
+ip0 -4 route add 192.168.241.1 via 10.0.0.100
+n2 wg set wg0 peer "$pub1" remove
+[[ $(! n0 ping -W 1 -c 1 192.168.241.1 || false) == *"From 10.0.0.100 icmp_seq=1 Destination Host Unreachable"* ]]
+
 n0 iptables -t nat -F
+n0 iptables -t filter -F
+n2 iptables -t nat -F
 ip0 link del vethrc
 ip0 link del vethrs
 ip1 link del wg0