| Message ID | 20191024152323.29987-1-geert+renesas@glider.be |
|---|---|
| State | Accepted |
| Delegated to: | David Miller |
| Headers | show |
| Series | [trivial] net: Fix various misspellings of "connect" | expand |
Geert Uytterhoeven <geert+renesas@glider.be> writes: > Fix misspellings of "disconnect", "disconnecting", "connections", and > "disconnected". > > Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> > --- > drivers/net/wimax/i2400m/usb.c | 2 +- > drivers/net/wireless/realtek/rtlwifi/rtl8192se/hw.c | 4 ++-- > include/net/cfg80211.h | 2 +- > net/netfilter/ipvs/ip_vs_ovf.c | 2 +- > net/wireless/reg.h | 2 +- > 5 files changed, 6 insertions(+), 6 deletions(-) For the wireless: Acked-by: Kalle Valo <kvalo@codeaurora.org>
On Thu, Oct 24, 2019 at 05:23:23PM +0200, Geert Uytterhoeven wrote: > Fix misspellings of "disconnect", "disconnecting", "connections", and > "disconnected". > > Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> > --- > drivers/net/wimax/i2400m/usb.c | 2 +- > drivers/net/wireless/realtek/rtlwifi/rtl8192se/hw.c | 4 ++-- > include/net/cfg80211.h | 2 +- > net/netfilter/ipvs/ip_vs_ovf.c | 2 +- > net/wireless/reg.h | 2 +- > 5 files changed, 6 insertions(+), 6 deletions(-) Thanks Geert, for the IPVS portion: Acked-by: Simon Horman <horms@verge.net.au>
From: Geert Uytterhoeven <geert+renesas@glider.be> Date: Thu, 24 Oct 2019 17:23:23 +0200 > Fix misspellings of "disconnect", "disconnecting", "connections", and > "disconnected". > > Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Applied to net-next.
diff --git a/drivers/net/wimax/i2400m/usb.c b/drivers/net/wimax/i2400m/usb.c index 6953f904232f8d9b..9659f9e1aaa64c8a 100644 --- a/drivers/net/wimax/i2400m/usb.c +++ b/drivers/net/wimax/i2400m/usb.c @@ -511,7 +511,7 @@ int i2400mu_probe(struct usb_interface *iface, /* - * Disconect a i2400m from the system. + * Disconnect a i2400m from the system. * * i2400m_stop() has been called before, so al the rx and tx contexts * have been taken down already. Make sure the queue is stopped, diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8192se/hw.c b/drivers/net/wireless/realtek/rtlwifi/rtl8192se/hw.c index 6d6e8994460d90ba..81313e0ca83411f7 100644 --- a/drivers/net/wireless/realtek/rtlwifi/rtl8192se/hw.c +++ b/drivers/net/wireless/realtek/rtlwifi/rtl8192se/hw.c @@ -1352,9 +1352,9 @@ static void _rtl92s_phy_set_rfhalt(struct ieee80211_hw *hw) /* SW/HW radio off or halt adapter!! For example S3/S4 */ } else { /* LED function disable. Power range is about 8mA now. */ - /* if write 0xF1 disconnet_pci power + /* if write 0xF1 disconnect_pci power * ifconfig wlan0 down power are both high 35:70 */ - /* if write oxF9 disconnet_pci power + /* if write oxF9 disconnect_pci power * ifconfig wlan0 down power are both low 12:45*/ rtl_write_byte(rtlpriv, 0x03, 0xF9); } diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index 4ab2c49423dcba4b..ab6850bbba995e15 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -6593,7 +6593,7 @@ struct cfg80211_roam_info { * time it is accessed in __cfg80211_roamed() due to delay in scheduling * rdev->event_work. In case of any failures, the reference is released * either in cfg80211_roamed() or in __cfg80211_romed(), Otherwise, it will be - * released while diconneting from the current bss. + * released while disconnecting from the current bss. */ void cfg80211_roamed(struct net_device *dev, struct cfg80211_roam_info *info, gfp_t gfp); diff --git a/net/netfilter/ipvs/ip_vs_ovf.c b/net/netfilter/ipvs/ip_vs_ovf.c index 78b074cd54646923..c03066fdd5ca69a3 100644 --- a/net/netfilter/ipvs/ip_vs_ovf.c +++ b/net/netfilter/ipvs/ip_vs_ovf.c @@ -5,7 +5,7 @@ * Authors: Raducu Deaconu <rhadoo_io@yahoo.com> * * Scheduler implements "overflow" loadbalancing according to number of active - * connections , will keep all conections to the node with the highest weight + * connections , will keep all connections to the node with the highest weight * and overflow to the next node if the number of connections exceeds the node's * weight. * Note that this scheduler might not be suitable for UDP because it only uses diff --git a/net/wireless/reg.h b/net/wireless/reg.h index dc8f689bd46902af..f9e83031a40a5eb3 100644 --- a/net/wireless/reg.h +++ b/net/wireless/reg.h @@ -114,7 +114,7 @@ void regulatory_hint_country_ie(struct wiphy *wiphy, u8 country_ie_len); /** - * regulatory_hint_disconnect - informs all devices have been disconneted + * regulatory_hint_disconnect - informs all devices have been disconnected * * Regulotory rules can be enhanced further upon scanning and upon * connection to an AP. These rules become stale if we disconnect
Fix misspellings of "disconnect", "disconnecting", "connections", and "disconnected". Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> --- drivers/net/wimax/i2400m/usb.c | 2 +- drivers/net/wireless/realtek/rtlwifi/rtl8192se/hw.c | 4 ++-- include/net/cfg80211.h | 2 +- net/netfilter/ipvs/ip_vs_ovf.c | 2 +- net/wireless/reg.h | 2 +- 5 files changed, 6 insertions(+), 6 deletions(-)