From patchwork Wed Aug 21 14:45:46 2019 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-Patchwork-Submitter: =?utf-8?q?Ren=C3=A9_van_Dorst?= X-Patchwork-Id: 1150905 X-Patchwork-Delegate: davem@davemloft.net Return-Path: X-Original-To: patchwork-incoming-netdev@ozlabs.org Delivered-To: patchwork-incoming-netdev@ozlabs.org Authentication-Results: ozlabs.org; spf=none (mailfrom) smtp.mailfrom=vger.kernel.org (client-ip=209.132.180.67; helo=vger.kernel.org; envelope-from=netdev-owner@vger.kernel.org; receiver=) Authentication-Results: ozlabs.org; dmarc=pass (p=reject dis=none) header.from=vdorst.com Authentication-Results: ozlabs.org; dkim=pass (2048-bit key; secure) header.d=vdorst.com header.i=@vdorst.com header.b="TvPUKkFL"; dkim-atps=neutral Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by ozlabs.org (Postfix) with ESMTP id 46D9T50rPNz9sML for ; Thu, 22 Aug 2019 00:46:01 +1000 (AEST) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1729592AbfHUOp6 (ORCPT ); Wed, 21 Aug 2019 10:45:58 -0400 Received: from mx.0dd.nl ([5.2.79.48]:54174 "EHLO mx.0dd.nl" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1729564AbfHUOp5 (ORCPT ); Wed, 21 Aug 2019 10:45:57 -0400 Received: from mail.vdorst.com (mail.vdorst.com [IPv6:fd01::250]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by mx.0dd.nl (Postfix) with ESMTPS id D68315FD0D; Wed, 21 Aug 2019 16:45:55 +0200 (CEST) Authentication-Results: mx.0dd.nl; dkim=pass (2048-bit key) header.d=vdorst.com header.i=@vdorst.com header.b="TvPUKkFL"; dkim-atps=neutral Received: from pc-rene.vdorst.com (pc-rene.vdorst.com [192.168.2.125]) by mail.vdorst.com (Postfix) with ESMTPA id 996881D8290F; Wed, 21 Aug 2019 16:45:55 +0200 (CEST) DKIM-Filter: OpenDKIM Filter v2.11.0 mail.vdorst.com 996881D8290F DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=vdorst.com; s=default; t=1566398755; bh=rQQjaVJu6F0+ngomi26cD5hFUcxFi6/NsMWrdUzjt0g=; h=From:To:Cc:Subject:Date:In-Reply-To:References:From; b=TvPUKkFLvcKRdpgl2L2y2E8l3DFHIi3J0OuN2i+zyYPl1GbYoMiI0DUo9DdupLl2J 0lxT0p/RrCZ76CF5GZdBBdhX1fhw9UL6MH/LrAPgJ1+qfZI6Jn5jXTwiOJsHczmbYu vnOC4NZsU/btekmtLkemRqebGWFKQ9mYgxn9vwgIAM8027C7txsbDWy+sdy6dm76zV 9JlbOMpLe4vlPSMyRohufh90RqhXmA5DCiSJHI7gWCrTHWYfqCcjK3W2qumd8KJSOV UiJK2fER5n9YTdx+tdx4Fz6Rgwbqo/GIH3Sf0AuEnWvE54wDLPC3/6TZO4ip6T9wdb j++wRr2LV03Kg== From: =?utf-8?q?Ren=C3=A9_van_Dorst?= To: Sean Wang , Andrew Lunn , Vivien Didelot , Florian Fainelli , "David S . Miller" , Matthias Brugger Cc: netdev@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-mediatek@lists.infradead.org, John Crispin , linux-mips@vger.kernel.org, Frank Wunderlich , =?utf-8?q?Ren=C3=A9_van_D?= =?utf-8?q?orst?= , devicetree@vger.kernel.org, Rob Herring Subject: [PATCH net-next v2 2/3] dt-bindings: net: dsa: mt7530: Add support for port 5 Date: Wed, 21 Aug 2019 16:45:46 +0200 Message-Id: <20190821144547.15113-3-opensource@vdorst.com> X-Mailer: git-send-email 2.20.1 In-Reply-To: <20190821144547.15113-1-opensource@vdorst.com> References: <20190821144547.15113-1-opensource@vdorst.com> MIME-Version: 1.0 Sender: netdev-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: netdev@vger.kernel.org MT7530 port 5 has many modes/configurations. Update the documentation how to use port 5. Signed-off-by: RenĂ© van Dorst Cc: devicetree@vger.kernel.org Cc: Rob Herring v1->v2: * Adding extra note about RGMII2 and gpio use. rfc->v1: * No change --- .../devicetree/bindings/net/dsa/mt7530.txt | 218 ++++++++++++++++++ 1 file changed, 218 insertions(+) diff --git a/Documentation/devicetree/bindings/net/dsa/mt7530.txt b/Documentation/devicetree/bindings/net/dsa/mt7530.txt index 47aa205ee0bd..43993aae3f9c 100644 --- a/Documentation/devicetree/bindings/net/dsa/mt7530.txt +++ b/Documentation/devicetree/bindings/net/dsa/mt7530.txt @@ -35,6 +35,42 @@ Required properties for the child nodes within ports container: - phy-mode: String, must be either "trgmii" or "rgmii" for port labeled "cpu". +Port 5 of the switch is muxed between: +1. GMAC5: GMAC5 can interface with another external MAC or PHY. +2. PHY of port 0 or port 4: PHY interfaces with an external MAC like 2nd GMAC + of the SOC. Used in many setups where port 0/4 becomes the WAN port. + Note: On a MT7621 SOC with integrated switch: 2nd GMAC can only connected to + GMAC5 when the gpios for RGMII2 (GPIO 22-33) are not used and not + connected to external component! + +Port 5 modes/configurations: +1. Port 5 is disabled and isolated: An external phy can interface to the 2nd + GMAC of the SOC. + In the case of a build-in MT7530 switch, port 5 shares the RGMII bus with 2nd + GMAC and an optional external phy. Mind the GPIO/pinctl settings of the SOC! +2. Port 5 is muxed to PHY of port 0/4: Port 0/4 interfaces with 2nd GMAC. + It is a simple MAC to PHY interface, port 5 needs to be setup for xMII mode + and RGMII delay. +3. Port 5 is muxed to GMAC5 and can interface to an external phy. + Port 5 becomes an extra switch port. + Only works on platform where external phy TX<->RX lines are swapped. + Like in the Ubiquiti ER-X-SFP. +4. Port 5 is muxed to GMAC5 and interfaces with the 2nd GAMC as 2nd CPU port. + Currently a 2nd CPU port is not supported by DSA code. + +Depending on how the external PHY is wired: +1. normal: The PHY can only connect to 2nd GMAC but not to the switch +2. swapped: RGMII TX, RX are swapped; external phy interface with the switch as + a ethernet port. But can't interface to the 2nd GMAC. + +Based on the DT the port 5 mode is configured. + +Driver tries to lookup the phy-handle of the 2nd GMAC of the master device. +When phy-handle matches PHY of port 0 or 4 then port 5 set-up as mode 2. +phy-mode must be set, see also example 2 below! + * mt7621: phy-mode = "rgmii-txid"; + * mt7623: phy-mode = "rgmii"; + See Documentation/devicetree/bindings/net/dsa/dsa.txt for a list of additional required, optional properties and how the integrated switch subnodes must be specified. @@ -94,3 +130,185 @@ Example: }; }; }; + +Example 2: MT7621: Port 4 is WAN port: 2nd GMAC -> Port 5 -> PHY port 4. + +ð { + status = "okay"; + + gmac0: mac@0 { + compatible = "mediatek,eth-mac"; + reg = <0>; + phy-mode = "rgmii"; + + fixed-link { + speed = <1000>; + full-duplex; + pause; + }; + }; + + gmac1: mac@1 { + compatible = "mediatek,eth-mac"; + reg = <1>; + phy-mode = "rgmii-txid"; + phy-handle = <&phy4>; + }; + + mdio: mdio-bus { + #address-cells = <1>; + #size-cells = <0>; + + /* Internal phy */ + phy4: ethernet-phy@4 { + reg = <4>; + }; + + mt7530: switch@1f { + compatible = "mediatek,mt7621"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x1f>; + pinctrl-names = "default"; + mediatek,mcm; + + resets = <&rstctrl 2>; + reset-names = "mcm"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "lan0"; + }; + + port@1 { + reg = <1>; + label = "lan1"; + }; + + port@2 { + reg = <2>; + label = "lan2"; + }; + + port@3 { + reg = <3>; + label = "lan3"; + }; + +/* Commented out. Port 4 is handled by 2nd GMAC. + port@4 { + reg = <4>; + label = "lan4"; + }; +*/ + + cpu_port0: port@6 { + reg = <6>; + label = "cpu"; + ethernet = <&gmac0>; + phy-mode = "rgmii"; + + fixed-link { + speed = <1000>; + full-duplex; + pause; + }; + }; + }; + }; + }; +}; + +Example 3: MT7621: Port 5 is connected to external PHY: Port 5 -> external PHY. + +ð { + status = "okay"; + + gmac0: mac@0 { + compatible = "mediatek,eth-mac"; + reg = <0>; + phy-mode = "rgmii"; + + fixed-link { + speed = <1000>; + full-duplex; + pause; + }; + }; + + mdio: mdio-bus { + #address-cells = <1>; + #size-cells = <0>; + + /* External phy */ + ephy5: ethernet-phy@7 { + reg = <7>; + }; + + mt7530: switch@1f { + compatible = "mediatek,mt7621"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x1f>; + pinctrl-names = "default"; + mediatek,mcm; + + resets = <&rstctrl 2>; + reset-names = "mcm"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "lan0"; + }; + + port@1 { + reg = <1>; + label = "lan1"; + }; + + port@2 { + reg = <2>; + label = "lan2"; + }; + + port@3 { + reg = <3>; + label = "lan3"; + }; + + port@4 { + reg = <4>; + label = "lan4"; + }; + + port@5 { + reg = <5>; + label = "lan5"; + phy-mode = "rgmii"; + phy-handle = <&ephy5>; + }; + + cpu_port0: port@6 { + reg = <6>; + label = "cpu"; + ethernet = <&gmac0>; + phy-mode = "rgmii"; + + fixed-link { + speed = <1000>; + full-duplex; + pause; + }; + }; + }; + }; + }; +};