deleted file mode 100644
@@ -1,29 +0,0 @@
-What: /sys/bus/mdio_bus/devices/.../phy_id
-Date: November 2012
-KernelVersion: 3.8
-Contact: netdev@vger.kernel.org
-Description:
- This attribute contains the 32-bit PHY Identifier as reported
- by the device during bus enumeration, encoded in hexadecimal.
- This ID is used to match the device with the appropriate
- driver.
-
-What: /sys/bus/mdio_bus/devices/.../phy_interface
-Date: February 2014
-KernelVersion: 3.15
-Contact: netdev@vger.kernel.org
-Description:
- This attribute contains the PHY interface as configured by the
- Ethernet driver during bus enumeration, encoded in string.
- This interface mode is used to configure the Ethernet MAC with the
- appropriate mode for its data lines to the PHY hardware.
-
-What: /sys/bus/mdio_bus/devices/.../phy_has_fixups
-Date: February 2014
-KernelVersion: 3.15
-Contact: netdev@vger.kernel.org
-Description:
- This attribute contains the boolean value whether a given PHY
- device has had any "fixup" workaround running on it, encoded as
- a boolean. This information is provided to help troubleshooting
- PHY configurations.
@@ -11,24 +11,31 @@ Date: February 2014
KernelVersion: 3.15
Contact: netdev@vger.kernel.org
Description:
- Boolean value indicating whether the PHY device has
- any fixups registered against it (phy_register_fixup)
+ This attribute contains the boolean value whether a given PHY
+ device has had any "fixup" workaround running on it, encoded as
+ a boolean. This information is provided to help troubleshooting
+ PHY configurations.
What: /sys/class/mdio_bus/<bus>/<device>/phy_id
Date: November 2012
KernelVersion: 3.8
Contact: netdev@vger.kernel.org
Description:
- 32-bit hexadecimal value corresponding to the PHY device's OUI,
- model and revision number.
+ This attribute contains the 32-bit PHY Identifier as reported
+ by the device during bus enumeration, encoded in hexadecimal.
+ This ID is used to match the device with the appropriate
+ driver.
What: /sys/class/mdio_bus/<bus>/<device>/phy_interface
Date: February 2014
KernelVersion: 3.15
Contact: netdev@vger.kernel.org
Description:
- String value indicating the PHY interface, possible
- values are:.
+ This attribute contains the PHY interface as configured by the
+ Ethernet driver during bus enumeration, encoded in string.
+ This interface mode is used to configure the Ethernet MAC with the
+ appropriate mode for its data lines to the PHY hardware.
+ Possible values are:
<empty> (not available), mii, gmii, sgmii, tbi, rev-mii,
rmii, rgmii, rgmii-id, rgmii-rxid, rgmii-txid, rtbi, smii
xgmii, moca, qsgmii, trgmii, 1000base-x, 2500base-x, rxaui,
Both sysfs-bus-mdio and sysfs-class-net-phydev contain the same duplication information. There is not currently any MDIO bus specific attribute, but there are PHY device (struct phy_device) specific attributes. Use the more precise description from sysfs-bus-mdio and carry that over to sysfs-class-net-phydev. Fixes: 86f22d04dfb5 ("net: sysfs: Document PHY device sysfs attributes") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> --- Documentation/ABI/testing/sysfs-bus-mdio | 29 ------------------- .../ABI/testing/sysfs-class-net-phydev | 19 ++++++++---- 2 files changed, 13 insertions(+), 35 deletions(-) delete mode 100644 Documentation/ABI/testing/sysfs-bus-mdio