diff mbox series

[03/12] net: ll_temac: Fix support for 64-bit platforms

Message ID 20190429083422.4356-4-esben@geanix.com
State Superseded
Delegated to: David Miller
Headers show
Series [01/12] net: ll_temac: Fix and simplify error handling by using devres functions | expand

Commit Message

Esben Haabendal April 29, 2019, 8:34 a.m. UTC 
The use of buffer descriptor APP4 field (32-bit) for storing skb pointer
obviously does not work on 64-bit platforms.
As APP3 is also unused, we can use that to store the other half of 64-bit
pointer values.

Contrary to what is hinted at in commit message of commit 15bfe05c8d63
("net: ethernet: xilinx: Mark XILINX_LL_TEMAC broken on 64-bit")
there are no other pointers stored in cdmac_bd.

Signed-off-by: Esben Haabendal <esben@geanix.com>
---
 drivers/net/ethernet/xilinx/Kconfig         |  1 -
 drivers/net/ethernet/xilinx/ll_temac_main.c | 35 ++++++++++++++++++++++++++---
 2 files changed, 32 insertions(+), 4 deletions(-)

Comments

Andrew Lunn April 29, 2019, 10:06 p.m. UTC | #1 
On Mon, Apr 29, 2019 at 10:34:13AM +0200, Esben Haabendal wrote:
> The use of buffer descriptor APP4 field (32-bit) for storing skb pointer
> obviously does not work on 64-bit platforms.
> As APP3 is also unused, we can use that to store the other half of 64-bit
> pointer values.
> 
> Contrary to what is hinted at in commit message of commit 15bfe05c8d63
> ("net: ethernet: xilinx: Mark XILINX_LL_TEMAC broken on 64-bit")
> there are no other pointers stored in cdmac_bd.
> 
> Signed-off-by: Esben Haabendal <esben@geanix.com>

Reviewed-by: Andrew Lunn <andrew@lunn.ch>

    Andrew
diff mbox series

Patch

diff --git a/drivers/net/ethernet/xilinx/Kconfig b/drivers/net/ethernet/xilinx/Kconfig
index da4ec57..6d68c8a 100644
--- a/drivers/net/ethernet/xilinx/Kconfig
+++ b/drivers/net/ethernet/xilinx/Kconfig
@@ -34,7 +34,6 @@  config XILINX_AXI_EMAC
 config XILINX_LL_TEMAC
 	tristate "Xilinx LL TEMAC (LocalLink Tri-mode Ethernet MAC) driver"
 	depends on (PPC || MICROBLAZE)
-	depends on !64BIT || BROKEN
 	select PHYLIB
 	---help---
 	  This driver supports the Xilinx 10/100/1000 LocalLink TEMAC
diff --git a/drivers/net/ethernet/xilinx/ll_temac_main.c b/drivers/net/ethernet/xilinx/ll_temac_main.c
index fddd1b3..bcafb89 100644
--- a/drivers/net/ethernet/xilinx/ll_temac_main.c
+++ b/drivers/net/ethernet/xilinx/ll_temac_main.c
@@ -619,11 +619,39 @@  static void temac_adjust_link(struct net_device *ndev)
 	mutex_unlock(&lp->indirect_mutex);
 }
 
+#ifdef CONFIG_64BIT
+
+void ptr_to_txbd(void *p, struct cdmac_bd *bd)
+{
+	bd->app3 = (u32)(((u64)p) >> 32);
+	bd->app4 = (u32)((u64)p & 0xFFFFFFFF);
+}
+
+void *ptr_from_txbd(struct cdmac_bd *bd)
+{
+	return (void *)(((u64)(bd->app3) << 32) | bd->app4);
+}
+
+#else
+
+void ptr_to_txbd(void *p, struct cmdac_bd *bd)
+{
+	bd->app4 = (u32)p;
+}
+
+void *ptr_from_txbd(struct cdmac_bd *bd)
+{
+	return (void *)(bd->app4);
+}
+
+#endif
+
 static void temac_start_xmit_done(struct net_device *ndev)
 {
 	struct temac_local *lp = netdev_priv(ndev);
 	struct cdmac_bd *cur_p;
 	unsigned int stat = 0;
+	struct sk_buff *skb;
 
 	cur_p = &lp->tx_bd_v[lp->tx_bd_ci];
 	stat = cur_p->app0;
@@ -631,8 +659,9 @@  static void temac_start_xmit_done(struct net_device *ndev)
 	while (stat & STS_CTRL_APP0_CMPLT) {
 		dma_unmap_single(ndev->dev.parent, cur_p->phys, cur_p->len,
 				 DMA_TO_DEVICE);
-		if (cur_p->app4)
-			dev_consume_skb_irq((struct sk_buff *)cur_p->app4);
+		skb = (struct sk_buff *)ptr_from_txbd(cur_p);
+		if (skb)
+			dev_consume_skb_irq(skb);
 		cur_p->app0 = 0;
 		cur_p->app1 = 0;
 		cur_p->app2 = 0;
@@ -711,7 +740,7 @@  temac_start_xmit(struct sk_buff *skb, struct net_device *ndev)
 	cur_p->len = skb_headlen(skb);
 	cur_p->phys = dma_map_single(ndev->dev.parent, skb->data,
 				     skb_headlen(skb), DMA_TO_DEVICE);
-	cur_p->app4 = (unsigned long)skb;
+	ptr_to_txbd((void *)skb, cur_p);
 
 	for (ii = 0; ii < num_frag; ii++) {
 		lp->tx_bd_tail++;