diff mbox series

[net-next,V2,14/15] net/mlx5e: Obsolete param field holding a constant value

Message ID 20190405211719.14979-15-saeedm@mellanox.com
State Accepted
Delegated to: David Miller
Headers show
Series [net-next,V2,01/15] net/mlx5: Handle event of power detection in the PCIE slot | expand

Commit Message

Saeed Mahameed April 5, 2019, 9:17 p.m. UTC 
From: Tariq Toukan <tariqt@mellanox.com>

The LRO WQE size is a constant, obsolete the parameter field
that holds it.

Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Reviewed-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
---
 drivers/net/ethernet/mellanox/mlx5/core/en.h      | 1 -
 drivers/net/ethernet/mellanox/mlx5/core/en_main.c | 3 +--
 2 files changed, 1 insertion(+), 3 deletions(-)
diff mbox series

Patch

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en.h b/drivers/net/ethernet/mellanox/mlx5/core/en.h
index b0b68dde3017..7ce5edeaba33 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en.h
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en.h
@@ -241,7 +241,6 @@  struct mlx5e_params {
 	struct net_dim_cq_moder rx_cq_moderation;
 	struct net_dim_cq_moder tx_cq_moderation;
 	bool lro_en;
-	u32 lro_wqe_sz;
 	u8  tx_min_inline_mode;
 	bool vlan_strip_disable;
 	bool scatter_fcs_en;
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
index e08a1eb04e22..35ce60b8214a 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
@@ -204,7 +204,6 @@  static u16 mlx5e_get_rq_headroom(struct mlx5_core_dev *mdev,
 void mlx5e_init_rq_type_params(struct mlx5_core_dev *mdev,
 			       struct mlx5e_params *params)
 {
-	params->lro_wqe_sz = MLX5E_PARAMS_DEFAULT_LRO_WQE_SZ;
 	params->log_rq_mtu_frames = is_kdump_kernel() ?
 		MLX5E_PARAMS_MINIMUM_LOG_RQ_SIZE :
 		MLX5E_PARAMS_DEFAULT_LOG_RQ_SIZE;
@@ -2637,7 +2636,7 @@  static void mlx5e_build_tir_ctx_lro(struct mlx5e_params *params, void *tirc)
 		 MLX5_TIRC_LRO_ENABLE_MASK_IPV4_LRO |
 		 MLX5_TIRC_LRO_ENABLE_MASK_IPV6_LRO);
 	MLX5_SET(tirc, tirc, lro_max_ip_payload_size,
-		 (params->lro_wqe_sz - ROUGH_MAX_L2_L3_HDR_SZ) >> 8);
+		 (MLX5E_PARAMS_DEFAULT_LRO_WQE_SZ - ROUGH_MAX_L2_L3_HDR_SZ) >> 8);
 	MLX5_SET(tirc, tirc, lro_timeout_period_usecs, params->lro_timeout);
 }