From patchwork Thu Feb 21 09:51:24 2019 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Maxime Chevallier X-Patchwork-Id: 1045963 X-Patchwork-Delegate: davem@davemloft.net Return-Path: X-Original-To: patchwork-incoming-netdev@ozlabs.org Delivered-To: patchwork-incoming-netdev@ozlabs.org Authentication-Results: ozlabs.org; spf=none (mailfrom) smtp.mailfrom=vger.kernel.org (client-ip=209.132.180.67; helo=vger.kernel.org; envelope-from=netdev-owner@vger.kernel.org; receiver=) Authentication-Results: ozlabs.org; dmarc=none (p=none dis=none) header.from=bootlin.com Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by ozlabs.org (Postfix) with ESMTP id 444qWp5C5yz9s7h for ; Thu, 21 Feb 2019 20:52:22 +1100 (AEDT) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1727652AbfBUJvp (ORCPT ); Thu, 21 Feb 2019 04:51:45 -0500 Received: from relay6-d.mail.gandi.net ([217.70.183.198]:48319 "EHLO relay6-d.mail.gandi.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1725814AbfBUJvo (ORCPT ); Thu, 21 Feb 2019 04:51:44 -0500 X-Originating-IP: 90.88.23.190 Received: from mc-bl-xps13.lan (aaubervilliers-681-1-81-190.w90-88.abo.wanadoo.fr [90.88.23.190]) (Authenticated sender: maxime.chevallier@bootlin.com) by relay6-d.mail.gandi.net (Postfix) with ESMTPSA id 3ECE4C0004; Thu, 21 Feb 2019 09:51:40 +0000 (UTC) From: Maxime Chevallier To: davem@davemloft.net Cc: Maxime Chevallier , netdev@vger.kernel.org, linux-kernel@vger.kernel.org, Andrew Lunn , Florian Fainelli , Heiner Kallweit , Russell King , linux-arm-kernel@lists.infradead.org, Antoine Tenart , thomas.petazzoni@bootlin.com, gregory.clement@bootlin.com, miquel.raynal@bootlin.com, nadavh@marvell.com, stefanc@marvell.com, mw@semihalf.com Subject: [PATCH net-next 3/7] net: phy: marvell10g: Use 2500BASEX when using 2.5GBASET Date: Thu, 21 Feb 2019 10:51:24 +0100 Message-Id: <20190221095128.28188-4-maxime.chevallier@bootlin.com> X-Mailer: git-send-email 2.19.2 In-Reply-To: <20190221095128.28188-1-maxime.chevallier@bootlin.com> References: <20190221095128.28188-1-maxime.chevallier@bootlin.com> MIME-Version: 1.0 Sender: netdev-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: netdev@vger.kernel.org The Marvell Alaska family of PHYs supports 2.5GBaseT and 5GBaseT modes, as defined in the 802.3bz specification. Upon establishing a 2.5GBASET link, the PHY will reconfigure it's MII interface to 2500BASEX. At 5G, the PHY will reconfigure it's interface to 5GBASE-R, but this mode isn't supported by any MAC for now. This was tested with : - The 88X3310, which is on the MacchiatoBin - The 88E2010, an Alaska PHY that has no fiber interfaces, and is limited to 5G maximum speed. Signed-off-by: Maxime Chevallier --- drivers/net/phy/marvell10g.c | 26 +++++++++++++++++++------- 1 file changed, 19 insertions(+), 7 deletions(-) diff --git a/drivers/net/phy/marvell10g.c b/drivers/net/phy/marvell10g.c index 8e2d6039b9b3..127200a8cf9b 100644 --- a/drivers/net/phy/marvell10g.c +++ b/drivers/net/phy/marvell10g.c @@ -235,6 +235,7 @@ static int mv3310_config_init(struct phy_device *phydev) { /* Check that the PHY interface type is compatible */ if (phydev->interface != PHY_INTERFACE_MODE_SGMII && + phydev->interface != PHY_INTERFACE_MODE_2500BASEX && phydev->interface != PHY_INTERFACE_MODE_XAUI && phydev->interface != PHY_INTERFACE_MODE_RXAUI && phydev->interface != PHY_INTERFACE_MODE_10GKR) @@ -325,18 +326,29 @@ static int mv3310_aneg_done(struct phy_device *phydev) static void mv3310_update_interface(struct phy_device *phydev) { if ((phydev->interface == PHY_INTERFACE_MODE_SGMII || + phydev->interface == PHY_INTERFACE_MODE_2500BASEX || phydev->interface == PHY_INTERFACE_MODE_10GKR) && phydev->link) { /* The PHY automatically switches its serdes interface (and - * active PHYXS instance) between Cisco SGMII and 10GBase-KR - * modes according to the speed. Florian suggests setting - * phydev->interface to communicate this to the MAC. Only do - * this if we are already in either SGMII or 10GBase-KR mode. + * active PHYXS instance) between Cisco SGMII, 10GBase-KR and + * 2500BaseX modes according to the speed. Florian suggests + * setting phydev->interface to communicate this to the MAC. + * Only do this if we are already in one of the above modes. */ - if (phydev->speed == SPEED_10000) + switch (phydev->speed) { + case SPEED_10000: phydev->interface = PHY_INTERFACE_MODE_10GKR; - else if (phydev->speed >= SPEED_10 && - phydev->speed < SPEED_10000) + break; + case SPEED_2500: + phydev->interface = PHY_INTERFACE_MODE_2500BASEX; + break; + case SPEED_1000: + case SPEED_100: + case SPEED_10: phydev->interface = PHY_INTERFACE_MODE_SGMII; + break; + default: + break; + } } }