diff mbox series

[net,4/6] qede: Fix system crash on configuring channels.

Message ID 20190206224347.17054-5-manishc@marvell.com
State Accepted
Delegated to: David Miller
Headers show
Series qed*: Bug fixes. | expand

Commit Message

Manish Chopra Feb. 6, 2019, 10:43 p.m. UTC 
From: Sudarsana Reddy Kalluru <skalluru@marvell.com>

Under heavy traffic load, when changing number of channels via
ethtool (ethtool -L) which will cause interface to be reloaded,
it was observed that some packets gets transmitted on old TX
channel/queue id which doesn't really exist after the channel
configuration leads to system crash.

Add a safeguard in the driver by validating queue id through
ndo_select_queue() which is called before the ndo_start_xmit().

Signed-off-by: Sudarsana Reddy Kalluru <skalluru@marvell.com>
Signed-off-by: Ariel Elior <aelior@marvell.com>
---
 drivers/net/ethernet/qlogic/qede/qede.h      |  3 +++
 drivers/net/ethernet/qlogic/qede/qede_fp.c   | 13 +++++++++++++
 drivers/net/ethernet/qlogic/qede/qede_main.c |  3 +++
 3 files changed, 19 insertions(+)
diff mbox series

Patch

diff --git a/drivers/net/ethernet/qlogic/qede/qede.h b/drivers/net/ethernet/qlogic/qede/qede.h
index 613249d..cd40426 100644
--- a/drivers/net/ethernet/qlogic/qede/qede.h
+++ b/drivers/net/ethernet/qlogic/qede/qede.h
@@ -494,6 +494,9 @@  struct qede_reload_args {
 
 /* Datapath functions definition */
 netdev_tx_t qede_start_xmit(struct sk_buff *skb, struct net_device *ndev);
+u16 qede_select_queue(struct net_device *dev, struct sk_buff *skb,
+		      struct net_device *sb_dev,
+		      select_queue_fallback_t fallback);
 netdev_features_t qede_features_check(struct sk_buff *skb,
 				      struct net_device *dev,
 				      netdev_features_t features);
diff --git a/drivers/net/ethernet/qlogic/qede/qede_fp.c b/drivers/net/ethernet/qlogic/qede/qede_fp.c
index bdf816f..31b046e 100644
--- a/drivers/net/ethernet/qlogic/qede/qede_fp.c
+++ b/drivers/net/ethernet/qlogic/qede/qede_fp.c
@@ -1695,6 +1695,19 @@  netdev_tx_t qede_start_xmit(struct sk_buff *skb, struct net_device *ndev)
 	return NETDEV_TX_OK;
 }
 
+u16 qede_select_queue(struct net_device *dev, struct sk_buff *skb,
+		      struct net_device *sb_dev,
+		      select_queue_fallback_t fallback)
+{
+	struct qede_dev *edev = netdev_priv(dev);
+	int total_txq;
+
+	total_txq = QEDE_TSS_COUNT(edev) * edev->dev_info.num_tc;
+
+	return QEDE_TSS_COUNT(edev) ?
+		fallback(dev, skb, NULL) % total_txq :  0;
+}
+
 /* 8B udp header + 8B base tunnel header + 32B option length */
 #define QEDE_MAX_TUN_HDR_LEN 48
 
diff --git a/drivers/net/ethernet/qlogic/qede/qede_main.c b/drivers/net/ethernet/qlogic/qede/qede_main.c
index 5a74fcb..9790f26 100644
--- a/drivers/net/ethernet/qlogic/qede/qede_main.c
+++ b/drivers/net/ethernet/qlogic/qede/qede_main.c
@@ -631,6 +631,7 @@  static int qede_setup_tc_block(struct qede_dev *edev,
 	.ndo_open = qede_open,
 	.ndo_stop = qede_close,
 	.ndo_start_xmit = qede_start_xmit,
+	.ndo_select_queue = qede_select_queue,
 	.ndo_set_rx_mode = qede_set_rx_mode,
 	.ndo_set_mac_address = qede_set_mac_addr,
 	.ndo_validate_addr = eth_validate_addr,
@@ -666,6 +667,7 @@  static int qede_setup_tc_block(struct qede_dev *edev,
 	.ndo_open = qede_open,
 	.ndo_stop = qede_close,
 	.ndo_start_xmit = qede_start_xmit,
+	.ndo_select_queue = qede_select_queue,
 	.ndo_set_rx_mode = qede_set_rx_mode,
 	.ndo_set_mac_address = qede_set_mac_addr,
 	.ndo_validate_addr = eth_validate_addr,
@@ -684,6 +686,7 @@  static int qede_setup_tc_block(struct qede_dev *edev,
 	.ndo_open = qede_open,
 	.ndo_stop = qede_close,
 	.ndo_start_xmit = qede_start_xmit,
+	.ndo_select_queue = qede_select_queue,
 	.ndo_set_rx_mode = qede_set_rx_mode,
 	.ndo_set_mac_address = qede_set_mac_addr,
 	.ndo_validate_addr = eth_validate_addr,