diff mbox series

[net-next,12/12] net: hns3: keep flow director state unchanged when reset

Message ID 20190130205552.8512-13-tanhuazhong@huawei.com
State Accepted
Delegated to: David Miller
Headers show
Series code optimizations & bugfixes for HNS3 driver | expand

Commit Message

tanhuazhong Jan. 30, 2019, 8:55 p.m. UTC 
From: Jian Shen <shenjian15@huawei.com>

In orginal codes, driver always enables flow director when
intializing. When user disable flow director with command
ethtool -K, the flow director will be enabled again after
resetting.

This patch fixes it by only enabling it when first initialzing.

Fixes: 6871af29b3ab ("net: hns3: Add reset handle for flow director")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
---
 .../net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c    | 10 ++++++----
 .../net/ethernet/hisilicon/hns3/hns3pf/hclge_main.h    |  2 +-
 2 files changed, 7 insertions(+), 5 deletions(-)
diff mbox series

Patch

diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
index b531eac12fea..2ffbf07ff829 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
@@ -1007,6 +1007,9 @@  static int hclge_configure(struct hclge_dev *hdev)
 	hdev->tm_info.hw_pfc_map = 0;
 	hdev->wanted_umv_size = cfg.umv_space;
 
+	if (hnae3_dev_fd_supported(hdev))
+		hdev->fd_en = true;
+
 	ret = hclge_parse_speed(cfg.default_speed, &hdev->hw.mac.speed);
 	if (ret) {
 		dev_err(&hdev->pdev->dev, "Get wrong speed ret=%d.\n", ret);
@@ -3973,7 +3976,6 @@  static int hclge_init_fd_config(struct hclge_dev *hdev)
 		return -EOPNOTSUPP;
 	}
 
-	hdev->fd_cfg.fd_en = true;
 	hdev->fd_cfg.proto_support =
 		TCP_V4_FLOW | UDP_V4_FLOW | SCTP_V4_FLOW | TCP_V6_FLOW |
 		UDP_V6_FLOW | SCTP_V6_FLOW | IPV4_USER_FLOW | IPV6_USER_FLOW;
@@ -4731,7 +4733,7 @@  static int hclge_add_fd_entry(struct hnae3_handle *handle,
 	if (!hnae3_dev_fd_supported(hdev))
 		return -EOPNOTSUPP;
 
-	if (!hdev->fd_cfg.fd_en) {
+	if (!hdev->fd_en) {
 		dev_warn(&hdev->pdev->dev,
 			 "Please enable flow director first\n");
 		return -EOPNOTSUPP;
@@ -4884,7 +4886,7 @@  static int hclge_restore_fd_entries(struct hnae3_handle *handle)
 		return 0;
 
 	/* if fd is disabled, should not restore it when reset */
-	if (!hdev->fd_cfg.fd_en)
+	if (!hdev->fd_en)
 		return 0;
 
 	hlist_for_each_entry_safe(rule, node, &hdev->fd_rule_list, rule_node) {
@@ -5170,7 +5172,7 @@  static void hclge_enable_fd(struct hnae3_handle *handle, bool enable)
 	struct hclge_vport *vport = hclge_get_vport(handle);
 	struct hclge_dev *hdev = vport->back;
 
-	hdev->fd_cfg.fd_en = enable;
+	hdev->fd_en = enable;
 	if (!enable)
 		hclge_del_all_fd_entries(handle, false);
 	else
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.h b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.h
index 2c413c63c6c9..c939f4a7f5f0 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.h
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.h
@@ -583,7 +583,6 @@  struct hclge_fd_key_cfg {
 
 struct hclge_fd_cfg {
 	u8 fd_mode;
-	u8 fd_en;
 	u16 max_key_length;
 	u32 proto_support;
 	u32 rule_num[2]; /* rule entry number */
@@ -758,6 +757,7 @@  struct hclge_dev {
 	struct hclge_fd_cfg fd_cfg;
 	struct hlist_head fd_rule_list;
 	u16 hclge_fd_rule_num;
+	u8 fd_en;
 
 	u16 wanted_umv_size;
 	/* max available unicast mac vlan space */