diff mbox series

[net,1/2] mlxsw: pci: Derive event type from event queue number

Message ID 20181004154728.8054-2-idosch@mellanox.com
State Accepted, archived
Delegated to: David Miller
Headers show
Series mlxsw: Couple of fixes | expand

Commit Message

Ido Schimmel Oct. 4, 2018, 3:48 p.m. UTC 
From: Nir Dotan <nird@mellanox.com>

Due to a hardware issue in Spectrum-2, the field event_type of the event
queue element (EQE) has become reserved. It was used to distinguish between
command interface completion events and completion events.

Use queue number to determine event type, as command interface completion
events are always received on EQ0 and mlxsw driver maps completion events
to EQ1.

Fixes: c3ab435466d5 ("mlxsw: spectrum: Extend to support Spectrum-2 ASIC")
Signed-off-by: Nir Dotan <nird@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
---
 drivers/net/ethernet/mellanox/mlxsw/pci.c | 11 +++++++----
 1 file changed, 7 insertions(+), 4 deletions(-)
diff mbox series

Patch

diff --git a/drivers/net/ethernet/mellanox/mlxsw/pci.c b/drivers/net/ethernet/mellanox/mlxsw/pci.c
index 4d271fb3de3d..5890fdfd62c3 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/pci.c
+++ b/drivers/net/ethernet/mellanox/mlxsw/pci.c
@@ -718,14 +718,17 @@  static void mlxsw_pci_eq_tasklet(unsigned long data)
 	memset(&active_cqns, 0, sizeof(active_cqns));
 
 	while ((eqe = mlxsw_pci_eq_sw_eqe_get(q))) {
-		u8 event_type = mlxsw_pci_eqe_event_type_get(eqe);
 
-		switch (event_type) {
-		case MLXSW_PCI_EQE_EVENT_TYPE_CMD:
+		/* Command interface completion events are always received on
+		 * queue MLXSW_PCI_EQ_ASYNC_NUM (EQ0) and completion events
+		 * are mapped to queue MLXSW_PCI_EQ_COMP_NUM (EQ1).
+		 */
+		switch (q->num) {
+		case MLXSW_PCI_EQ_ASYNC_NUM:
 			mlxsw_pci_eq_cmd_event(mlxsw_pci, eqe);
 			q->u.eq.ev_cmd_count++;
 			break;
-		case MLXSW_PCI_EQE_EVENT_TYPE_COMP:
+		case MLXSW_PCI_EQ_COMP_NUM:
 			cqn = mlxsw_pci_eqe_cqn_get(eqe);
 			set_bit(cqn, active_cqns);
 			cq_handle = true;