@@ -123,6 +123,13 @@ config MDIO_MOXART
This driver supports the MDIO interface found in the network
interface units of the MOXA ART SoC
+config MDIO_MSCC_MIIM
+ tristate "Microsemi MIIM interface support"
+ depends on HAS_IOMEM
+ help
+ This driver supports the MIIM (MDIO) interface found in the network
+ switches of the Microsemi SoCs
+
config MDIO_OCTEON
tristate "Octeon and some ThunderX SOCs MDIO buses"
depends on 64BIT
@@ -34,6 +34,7 @@ obj-$(CONFIG_MDIO_GPIO) += mdio-gpio.o
obj-$(CONFIG_MDIO_HISI_FEMAC) += mdio-hisi-femac.o
obj-$(CONFIG_MDIO_I2C) += mdio-i2c.o
obj-$(CONFIG_MDIO_MOXART) += mdio-moxart.o
+obj-$(CONFIG_MDIO_MSCC_MIIM) += mdio-mscc-miim.o
obj-$(CONFIG_MDIO_OCTEON) += mdio-octeon.o
obj-$(CONFIG_MDIO_SUN4I) += mdio-sun4i.o
obj-$(CONFIG_MDIO_THUNDER) += mdio-thunder.o
new file mode 100644
@@ -0,0 +1,197 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Driver for the MDIO interface of Microsemi network switches.
+ *
+ * Author: Alexandre Belloni <alexandre.belloni@bootlin.com>
+ * Copyright (c) 2017 Microsemi Corporation
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/phy.h>
+#include <linux/platform_device.h>
+#include <linux/bitops.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/of_mdio.h>
+
+#define MSCC_MIIM_REG_STATUS 0x0
+#define MSCC_MIIM_STATUS_STAT_BUSY BIT(3)
+#define MSCC_MIIM_REG_CMD 0x8
+#define MSCC_MIIM_CMD_OPR_WRITE BIT(1)
+#define MSCC_MIIM_CMD_OPR_READ BIT(2)
+#define MSCC_MIIM_CMD_WRDATA_SHIFT 4
+#define MSCC_MIIM_CMD_REGAD_SHIFT 20
+#define MSCC_MIIM_CMD_PHYAD_SHIFT 25
+#define MSCC_MIIM_CMD_VLD BIT(31)
+#define MSCC_MIIM_REG_DATA 0xC
+#define MSCC_MIIM_DATA_ERROR (BIT(16) | BIT(17))
+
+#define MSCC_PHY_REG_PHY_CFG 0x0
+#define PHY_CFG_PHY_ENA (BIT(0) | BIT(1) | BIT(2) | BIT(3))
+#define PHY_CFG_PHY_COMMON_RESET BIT(4)
+#define PHY_CFG_PHY_RESET (BIT(5) | BIT(6) | BIT(7) | BIT(8))
+#define MSCC_PHY_REG_PHY_STATUS 0x4
+
+struct mscc_miim_dev {
+ void __iomem *regs;
+ void __iomem *phy_regs;
+};
+
+static int mscc_miim_wait_ready(struct mii_bus *bus)
+{
+ struct mscc_miim_dev *miim = bus->priv;
+ u32 val;
+
+ readl_poll_timeout(miim->regs + MSCC_MIIM_REG_STATUS, val,
+ !(val & MSCC_MIIM_STATUS_STAT_BUSY), 100, 250000);
+ if (val & MSCC_MIIM_STATUS_STAT_BUSY)
+ return -ETIMEDOUT;
+
+ return 0;
+}
+
+static int mscc_miim_read(struct mii_bus *bus, int mii_id, int regnum)
+{
+ struct mscc_miim_dev *miim = bus->priv;
+ u32 val;
+ int ret;
+
+ ret = mscc_miim_wait_ready(bus);
+ if (ret)
+ goto out;
+
+ writel(MSCC_MIIM_CMD_VLD | (mii_id << MSCC_MIIM_CMD_PHYAD_SHIFT) |
+ (regnum << MSCC_MIIM_CMD_REGAD_SHIFT) | MSCC_MIIM_CMD_OPR_READ,
+ miim->regs + MSCC_MIIM_REG_CMD);
+
+ ret = mscc_miim_wait_ready(bus);
+ if (ret)
+ goto out;
+
+ val = readl(miim->regs + MSCC_MIIM_REG_DATA);
+ if (val & MSCC_MIIM_DATA_ERROR) {
+ ret = -EIO;
+ goto out;
+ }
+
+ ret = val & 0xFFFF;
+out:
+ return ret;
+}
+
+static int mscc_miim_write(struct mii_bus *bus, int mii_id,
+ int regnum, u16 value)
+{
+ struct mscc_miim_dev *miim = bus->priv;
+ int ret;
+
+ ret = mscc_miim_wait_ready(bus);
+ if (ret < 0)
+ goto out;
+
+ writel(MSCC_MIIM_CMD_VLD | (mii_id << MSCC_MIIM_CMD_PHYAD_SHIFT) |
+ (regnum << MSCC_MIIM_CMD_REGAD_SHIFT) |
+ (value << MSCC_MIIM_CMD_WRDATA_SHIFT) |
+ MSCC_MIIM_CMD_OPR_WRITE,
+ miim->regs + MSCC_MIIM_REG_CMD);
+
+out:
+ return ret;
+}
+
+static int mscc_miim_reset(struct mii_bus *bus)
+{
+ struct mscc_miim_dev *miim = bus->priv;
+
+ if (miim->phy_regs) {
+ writel(0, miim->phy_regs + MSCC_PHY_REG_PHY_CFG);
+ writel(0x1ff, miim->phy_regs + MSCC_PHY_REG_PHY_CFG);
+ mdelay(500);
+ }
+
+ return 0;
+}
+
+static int mscc_miim_probe(struct platform_device *pdev)
+{
+ struct resource *res;
+ struct mii_bus *bus;
+ struct mscc_miim_dev *dev;
+ int ret;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res)
+ return -ENODEV;
+
+ bus = devm_mdiobus_alloc_size(&pdev->dev, sizeof(*dev));
+ if (!bus)
+ return -ENOMEM;
+
+ bus->name = "mscc_miim";
+ bus->read = mscc_miim_read;
+ bus->write = mscc_miim_write;
+ bus->reset = mscc_miim_reset;
+ snprintf(bus->id, MII_BUS_ID_SIZE, "%s-mii", dev_name(&pdev->dev));
+ bus->parent = &pdev->dev;
+
+ dev = bus->priv;
+ dev->regs = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(dev->regs)) {
+ dev_err(&pdev->dev, "Unable to map MIIM registers\n");
+ return PTR_ERR(dev->regs);
+ }
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+ if (res) {
+ dev->phy_regs = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(dev->phy_regs)) {
+ dev_err(&pdev->dev, "Unable to map internal phy registers\n");
+ return PTR_ERR(dev->phy_regs);
+ }
+ }
+
+ if (pdev->dev.of_node)
+ ret = of_mdiobus_register(bus, pdev->dev.of_node);
+ else
+ ret = mdiobus_register(bus);
+
+ if (ret < 0) {
+ dev_err(&pdev->dev, "Cannot register MDIO bus (%d)\n", ret);
+ return ret;
+ }
+
+ platform_set_drvdata(pdev, bus);
+
+ return 0;
+}
+
+static int mscc_miim_remove(struct platform_device *pdev)
+{
+ struct mii_bus *bus = platform_get_drvdata(pdev);
+
+ mdiobus_unregister(bus);
+
+ return 0;
+}
+
+static const struct of_device_id mscc_miim_match[] = {
+ { .compatible = "mscc,ocelot-miim" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, mscc_miim_match);
+
+static struct platform_driver mscc_miim_driver = {
+ .probe = mscc_miim_probe,
+ .remove = mscc_miim_remove,
+ .driver = {
+ .name = "mscc-miim",
+ .of_match_table = mscc_miim_match,
+ },
+};
+
+module_platform_driver(mscc_miim_driver);
+
+MODULE_DESCRIPTION("Microsemi MIIM driver");
+MODULE_AUTHOR("Alexandre Belloni <alexandre.belloni@bootlin.com>");
+MODULE_LICENSE("Dual MIT/GPL");
Add a driver for the Microsemi MII Management controller (MIIM) found on Microsemi SoCs. On Ocelot, there are two controllers, one is connected to the internal PHYs, the other one can communicate with external PHYs. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> --- drivers/net/phy/Kconfig | 7 ++ drivers/net/phy/Makefile | 1 + drivers/net/phy/mdio-mscc-miim.c | 197 +++++++++++++++++++++++++++++++ 3 files changed, 205 insertions(+) create mode 100644 drivers/net/phy/mdio-mscc-miim.c