| Message ID | 20180301191547.2816-1-mdf@kernel.org |
|---|---|
| State | Changes Requested, archived |
| Delegated to: | David Miller |
| Headers | show |
| Series | [RESEND,v4,1/2] dt-bindings: net: Add bindings for National Instruments XGE netdev | expand |
On 3/1/2018 10:15 PM, Moritz Fischer wrote: > This adds bindings for the NI XGE 1G/10G network device. > > Reviewed-by: Rob Herring <robh@kernel.org> > Signed-off-by: Moritz Fischer <mdf@kernel.org> > --- > > Changes from v3: > - Added Rob's Reviewed-by > > Changes from v2: > - Addressed Rob's comments w.r.t to IRQ names and typo > > Changes from v1: > - Corrected from nixge -> nixge.txt > --- > Documentation/devicetree/bindings/net/nixge.txt | 32 +++++++++++++++++++++++++ > 1 file changed, 32 insertions(+) > create mode 100644 Documentation/devicetree/bindings/net/nixge.txt > > diff --git a/Documentation/devicetree/bindings/net/nixge.txt b/Documentation/devicetree/bindings/net/nixge.txt > new file mode 100644 > index 000000000000..e55af7f0881a > --- /dev/null > +++ b/Documentation/devicetree/bindings/net/nixge.txt > @@ -0,0 +1,32 @@ > +* NI XGE Ethernet controller > + > +Required properties: > +- compatible: Should be "ni,xge-enet-2.00" > +- reg: Address and length of the register set for the device > +- interrupts: Should contain tx and rx interrupt Maybe rx and tx, looking below: > +- interrupt-names: Should be "rx" and "tx" > +- phy-mode: See ethernet.txt file in the same directory. > +- phy-handle: See ethernet.txt file in the same directory. > +- nvmem-cells: Phandle of nvmem cell containing the MAC address > +- nvmem-cell-names: Should be "address" [...] MBR, Sergei
diff --git a/Documentation/devicetree/bindings/net/nixge.txt b/Documentation/devicetree/bindings/net/nixge.txt new file mode 100644 index 000000000000..e55af7f0881a --- /dev/null +++ b/Documentation/devicetree/bindings/net/nixge.txt @@ -0,0 +1,32 @@ +* NI XGE Ethernet controller + +Required properties: +- compatible: Should be "ni,xge-enet-2.00" +- reg: Address and length of the register set for the device +- interrupts: Should contain tx and rx interrupt +- interrupt-names: Should be "rx" and "tx" +- phy-mode: See ethernet.txt file in the same directory. +- phy-handle: See ethernet.txt file in the same directory. +- nvmem-cells: Phandle of nvmem cell containing the MAC address +- nvmem-cell-names: Should be "address" + +Examples (10G generic PHY): + nixge0: ethernet@40000000 { + compatible = "ni,xge-enet-2.00"; + reg = <0x40000000 0x6000>; + + nvmem-cells = <ð1_addr>; + nvmem-cell-names = "address"; + + interrupts = <0 29 IRQ_TYPE_LEVEL_HIGH>, <0 30 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "rx", "tx"; + interrupt-parent = <&intc>; + + phy-mode = "xgmii"; + phy-handle = <ðernet_phy1>; + + ethernet_phy1: ethernet-phy@4 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <4>; + }; + };