diff mbox

[net-next,04/13] i40e: Reprogram port offloads after reset

Message ID 20170430132451.68494-5-jeffrey.t.kirsher@intel.com
State Accepted, archived
Delegated to: David Miller
Headers show

Commit Message

Kirsher, Jeffrey T April 30, 2017, 1:24 p.m. UTC 
From: Alexander Duyck <alexander.h.duyck@intel.com>

This patch corrects a major oversight in that we were not reprogramming the
ports after a reset.  As a result we completely lost all of the Rx tunnel
offloads on receive including Rx checksum, RSS on inner headers, and ATR.

The fix for this is pretty standard as all we needed to do is reset the
filter bits to pending for all active filters and schedule the sync event.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/i40e/i40e_main.c | 20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)
diff mbox

Patch

diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
index 063044268170..f44affc7e08c 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -7331,6 +7331,23 @@  static void i40e_handle_mdd_event(struct i40e_pf *pf)
 }
 
 /**
+ * i40e_sync_udp_filters - Trigger a sync event for existing UDP filters
+ * @pf: board private structure
+ **/
+static void i40e_sync_udp_filters(struct i40e_pf *pf)
+{
+	int i;
+
+	/* loop through and set pending bit for all active UDP filters */
+	for (i = 0; i < I40E_MAX_PF_UDP_OFFLOAD_PORTS; i++) {
+		if (pf->udp_ports[i].port)
+			pf->pending_udp_bitmap |= BIT_ULL(i);
+	}
+
+	pf->flags |= I40E_FLAG_UDP_FILTER_SYNC;
+}
+
+/**
  * i40e_sync_udp_filters_subtask - Sync the VSI filter list with HW
  * @pf: board private structure
  **/
@@ -10738,6 +10755,9 @@  static int i40e_setup_pf_switch(struct i40e_pf *pf, bool reinit)
 
 	i40e_ptp_init(pf);
 
+	/* repopulate tunnel port filters */
+	i40e_sync_udp_filters(pf);
+
 	return ret;
 }