| Message ID | 20161224044019.13797-1-bpoirier@suse.com |
|---|---|
| State | Not Applicable, archived |
| Delegated to: | David Miller |
| Headers | show |
>>>>> "Benjamin" == Benjamin Poirier <bpoirier@suse.com> writes:
Benjamin> bna & bfa firmware version 3.2.5.1 was submitted to
Benjamin> linux-firmware on Feb 17 19:10:20 2015 -0500 in 0ab54ff1dc
Benjamin> ("linux-firmware: Add QLogic BR Series Adapter Firmware").
Benjamin> Increase bfa's requested firmware version. Also increase the
Benjamin> driver version. I only tested that all of the devices probe
Benjamin> without error.
Applied to 4.10/scsi-fixes.
diff --git a/drivers/scsi/bfa/bfad.c b/drivers/scsi/bfa/bfad.c index 9d253cb..e70410b 100644 --- a/drivers/scsi/bfa/bfad.c +++ b/drivers/scsi/bfa/bfad.c @@ -64,9 +64,9 @@ int max_rport_logins = BFA_FCS_MAX_RPORT_LOGINS; u32 bfi_image_cb_size, bfi_image_ct_size, bfi_image_ct2_size; u32 *bfi_image_cb, *bfi_image_ct, *bfi_image_ct2; -#define BFAD_FW_FILE_CB "cbfw-3.2.3.0.bin" -#define BFAD_FW_FILE_CT "ctfw-3.2.3.0.bin" -#define BFAD_FW_FILE_CT2 "ct2fw-3.2.3.0.bin" +#define BFAD_FW_FILE_CB "cbfw-3.2.5.1.bin" +#define BFAD_FW_FILE_CT "ctfw-3.2.5.1.bin" +#define BFAD_FW_FILE_CT2 "ct2fw-3.2.5.1.bin" static u32 *bfad_load_fwimg(struct pci_dev *pdev); static void bfad_free_fwimg(void); diff --git a/drivers/scsi/bfa/bfad_drv.h b/drivers/scsi/bfa/bfad_drv.h index f9e8620..cfcfff4 100644 --- a/drivers/scsi/bfa/bfad_drv.h +++ b/drivers/scsi/bfa/bfad_drv.h @@ -58,7 +58,7 @@ #ifdef BFA_DRIVER_VERSION #define BFAD_DRIVER_VERSION BFA_DRIVER_VERSION #else -#define BFAD_DRIVER_VERSION "3.2.25.0" +#define BFAD_DRIVER_VERSION "3.2.25.1" #endif #define BFAD_PROTO_NAME FCPI_NAME
bna & bfa firmware version 3.2.5.1 was submitted to linux-firmware on Feb 17 19:10:20 2015 -0500 in 0ab54ff1dc ("linux-firmware: Add QLogic BR Series Adapter Firmware"). bna was updated to use the newer firmware on Feb 19 16:02:32 2015 -0500 in 3f307c3d70 ("bna: Update the Driver and Firmware Version") bfa was not updated. I presume this was an oversight but it broke support for bfa+bna cards such as the following 04:00.0 Fibre Channel [0c04]: Brocade Communications Systems, Inc. 1010/1020/1007/1741 10Gbps CNA [1657:0014] (rev 01) 04:00.1 Fibre Channel [0c04]: Brocade Communications Systems, Inc. 1010/1020/1007/1741 10Gbps CNA [1657:0014] (rev 01) 04:00.2 Ethernet controller [0200]: Brocade Communications Systems, Inc. 1010/1020/1007/1741 10Gbps CNA [1657:0014] (rev 01) 04:00.3 Ethernet controller [0200]: Brocade Communications Systems, Inc. 1010/1020/1007/1741 10Gbps CNA [1657:0014] (rev 01) Currently, if the bfa module is loaded first, bna fails to probe the respective devices with [ 215.026787] bna: QLogic BR-series 10G Ethernet driver - version: 3.2.25.1 [ 215.043707] bna 0000:04:00.2: bar0 mapped to ffffc90001fc0000, len 262144 [ 215.060656] bna 0000:04:00.2: initialization failed err=1 [ 215.073893] bna 0000:04:00.3: bar0 mapped to ffffc90002040000, len 262144 [ 215.090644] bna 0000:04:00.3: initialization failed err=1 Whereas if bna is loaded first, bfa fails with [ 249.592109] QLogic BR-series BFA FC/FCOE SCSI driver - version: 3.2.25.0 [ 249.610738] bfa 0000:04:00.0: Running firmware version is incompatible with the driver version [ 249.833513] bfa 0000:04:00.0: bfa init failed [ 249.833919] scsi host6: QLogic BR-series FC/FCOE Adapter, hwpath: 0000:04:00.0 driver: 3.2.25.0 [ 249.841446] bfa 0000:04:00.1: Running firmware version is incompatible with the driver version [ 250.045449] bfa 0000:04:00.1: bfa init failed [ 250.045962] scsi host7: QLogic BR-series FC/FCOE Adapter, hwpath: 0000:04:00.1 driver: 3.2.25.0 Increase bfa's requested firmware version. Also increase the driver version. I only tested that all of the devices probe without error. Reported-by: Tim Ehlers <tehlers@gwdg.de> Signed-off-by: Benjamin Poirier <bpoirier@suse.com> Acked-by: Rasesh Mody <rasesh.mody@cavium.com> --- drivers/scsi/bfa/bfad.c | 6 +++--- drivers/scsi/bfa/bfad_drv.h | 2 +- 2 files changed, 4 insertions(+), 4 deletions(-) Changes v1-v2: Also increase the driver version